Used Veb-Dessau 3000 X 1500 X 185 for sale (65,598)

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Nwsdpfx Asiivgyef Ssl Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Nedpfx Afeiink So Sowl Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Nwedpfx Aec S N Nqsf Sel Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm Nwodpfxjt Tqgxo Af Ssl turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm Nedpsxp Rzbofx Af Sowl turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: used, Year of construction: 1975, turning diameter over bed 0500 mm turning diameter over slide rest 250 mm turning length 1500 mm spindle bore 65 mm Nwsdpfx Aow H Di Nof Ssl spindle turning speed range 25- 1250 U/min total power requirement 5 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 1,5 x 1,5 m With quick tool change device, chuck and DRO.

Condition: used, Year of construction: 1963, Technical details: Njdpfx Aju Ix Arof Sjwl turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck Nodpfxexbzqqj Af Sjwl - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Nodpfezdd E Rjx Af Sswl Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table Nwsdpfx Ajw Dzk Esf Ssl -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available -Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Nodpfxjztz A Rs Af Sewl

Condition: good (used), Offer 26038 Technical data approx.: - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 350 mm - Plate height with base frame approx.: 870 mm - Top plate thickness approx.: 75 mm - 9 T-slots in table surface, length: 3000 mm - Center distance of T-slots in table surface each: 250 mm - Center distance of T-slots from outside edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required space: L 3000 x W 2500 x H 870 mm - Weight approx.: 8000 kg Nsdpfx Aoyc T Dtsf Sowl

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW Nwjdev Nkdmopfx Af Sol - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Condition: used, Item No. 16191 T-slot plate Nedpfjzibw Hox Af Sewl Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 T-slots in the table surface, length 3000 mm - Center distance of the T-slots in the table surface: 250 mm each - Center distance of the T-slots from the outer edge: 125 mm - T-slot width approx. 21 / 31 mm - T-slot depth approx. 30 mm - 4 adjustable support feet - Space required: L 3000 x W 2000 x H 810 mm - Weight approx. 4200 kg

Condition: good (used), Offer 26013 Technical data: - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm Nwsdpfx Afoyi Ahne Sol - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm - Table frame/base - Total weight approx. 550 kg

Condition: good (used), Offer 08533 Technical specifications: - Length: approx. 2000 mm - Width: approx. 1500 mm - Material thickness of the top plate: approx. 40 mm - Overall height of the ribbed plate: approx. 180 mm Nwodsh Uuavspfx Af Sel - Overall height of the plate with steel substructure: approx. 850 mm - Weight: approx. 1800 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: Nwodjx Ew Dqspfx Af Ssl - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Condition: repair required (used), functionality: not functional, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Nwodpfx Afjzq Sqaj Sel

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip with steel lid, 3000 x 2000 x 1250 mm Product description: For sale is a skip with a steel lid, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Base: 3 mm - Sides: 3 mm - Steel lid: 2 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal Nsdpfozq E R Tex Af Sswl - Drain valve in the base of the container - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - The entire range of RAL colors is available - Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: – Electrical Motor – Springs Nwsdpeg Snudjfx Af Ssl Vibrating screen will be overhauled, sandblasted and painted.

Condition: as good as new (ex-display), Manufacturer: Cyrus Size: 1500 x 1150 (1050)mm Unbalance Motor: 2 Pcs. Friedrich F 285-4-3.4 (1,4 kW / 1.460 RPM) With Stainless steel wear plate. Nwodpfx Afeiv Hyqe Sol

Condition: used, mileage: 501,024 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 4x4 X-Track * X-Track drive / Hydrodrive * VEB + * Dual-circuit hydraulic system for tipping and sliding floor hydraulics * Lane departure warning system * Distance warning system * Auxiliary heater * German vehicle / German truck * 1 bed * Refrigerator * Roof hatch * Automatic climate control * Tires: * 1st axle 385/65 R 22.5 9/9 mm * 2nd axle 315/80 R 22.5 6/7/6/6 mm * All information without guarantee * Further information and criteria available / Additional service * Repainting and retrofitting possible Nodpfxszpc Iao Af Sswl * Short-term registration / Customs registration / License plate * Transfer and shipment possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing solution for every customer. We can often also support customers with poor credit ratings and facilitate contact with good leasing partners. * Own workshop * We speak Polish. * We speak English. * Repainting in your desired color is possible in our workshop at a reasonable price and in good quality. * Are you located far away and do not have the opportunity or time to inspect and check a truck with us? No problem, you can order an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used vehicle throughout Europe for an additional charge.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Nwedpsziaggofx Af Sjl Technical Specification Taper Size BT 50

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Open-top skip container, 3000 x 2000 x 1250 mm Product description: For sale is an open-top skip container, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Bottom: 3 mm - Sides: 3 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the bottom of the container - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - Full range of RAL colors available - Zinc phosphate coating inside and outside Nwsdpfxjzm Eihs Af Sol - Primer, outside painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Condition: used, Year of construction: 1996, Technical details: Nwjdpewwlvlofx Af Sol turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *