Used Traub Traub Tnl 32 for sale (7,878)

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Gedpfxey A Tpqe Ad Iebp Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Geded Hx Hmopfx Ad Isbp Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Gedpfoxw N Sbsx Ad Ijbp Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Heidenhain LC 192F length measuring system, ML 740 mm, item no. 387 093-32, serial no. 19543276H, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Gedpfxji Eal Re Ad Isbp

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump, serial number: 9700005166/1, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Gjdpfxoi D Nvcs Ad Isbp

Condition: used, functionality: unexamined, Ferwood Code: RU0011675 - Manufacturer Code: 4-008-32-1204 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment service, please contact us. 1.5KG - 36X26X21 Godpfx Asybbtmed Iobp

Condition: used, functionality: unexamined, Ferwood Code: RU0000293 - Manufacturer Code: 2-083-01-5105 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Godpfx Aewtfzasd Ijbp

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003309 - Manufacturer Code: 2-083-01-5105 - Condition: Like new (display item) - Functionality: Fully functional - If interested we offer an overhaul service, please contact us. Gbsdpfx Adewp Nnvj Iop

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0001735 - Manufacturer Code: 822010640 - Condition: As new (display unit) - Functionality: Fully operational - Compatible machine: - If interested, we offer a reconditioning service; please contact us. 1KG 20X20X20 Gbjdpfx Aoymd Nnsd Ijp

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Gedpfx Aoiiduaed Iobp Hub des Druckstückes / stroke of the pressure piece ca. 30mm Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m Gedpfot H Smysx Ad Iobp

Condition: excellent (used), Description to follow! Godpfx Adew U U Iks Iobp

Condition: used, Year of construction: 1981, drill diameter 32 mm Gsdpfx Adjt Hwn Ae Isbp drilling length 0 mm Universal Drill Bit Grinder lots of accessories

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gbjdpfxjy A Tc De Ad Isp Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, Year of construction: 2026, tubebender-mandrelbender Zopf 32 H Gbodsfh Nz Tspfx Ad Isp with small digital for programming mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel maximum bending radius 275 mm minimum bending radius 36 mm maximum bending angle 180 degrees motor 2,2 KW main motor hydraulic motor 1,5 KW hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, We are selling our tower crane due to company downsizing. It is a POTAIN HUP 32-27 from 2019. The crane is in top condition with the usual signs of wear and tear. No known defects. The crane has not been used for rental purposes. Technical details: Gbsdpfjzlb Epsx Ad Iop - Maximum outreach: 32 meters - Maximum hook height: 27 meters - Maximum lifting capacity: 4,000 kg (up to an outreach of approximately 12 meters) - Lifting capacity at the jib tip: 1,000 kg (at full 32-meter outreach) - Support base: 4 m x 4 m - Slewing radius: 2.25 meters or 2.75 meters In addition: - The crane is equipped with the TopSite system. - The crane has a central lubrication system (automated). - The cable guide chain in the mast (Potain recall) has already been replaced. - Includes a permanently installed connection cable, approx. 15m, with a 63A CEE plug. - The radio remote control is in very good condition, almost new. - Includes cable remote control. - Includes all technical documentation (original). - Includes concrete ballast. - Due to its transport length of approximately 12m, it can be used on very tight construction sites (see pictures). The crane is currently located in 76870 Kandel and must be removed from there at the buyer's expense, including the ballast. Transport axles are not included in the offer. A suitable generator must be brought for functional testing, as there is no power supply on site. The sale is made without any warranty or liability for defects. Errors and prior sale are reserved. If you are interested, please contact us via message or email.

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Gedpfx Adozi Dc Sj Isbp Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: good (used), Weiss SC 450 Corrosion Testing Device Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing device / salt spray testing chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight, empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for brine Gbodpfx Adozbatrj Iep Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Testing Procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial application. Operating hours according to display: approx. 37,926.6 h Optical condition as shown in the pictures. Interior with visible deposits / corrosion marks due to use. Device can be switched on, display is active. Inspection and testing on site possible by arrangement. Scope of delivery: see pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Gbsdpszlbq Sofx Ad Ijp Equipment and technical data: - Professional-grade panel saw in a heavy-duty design - with scoring unit

Condition: excellent (used), Year of construction: 1991, Universal CNC milling machine Specifications: CNC: HEIDENHAIN TNC415 Table longitudinal travel X-axis: 3,200 mm Transversal travel Y-axis: 1,200 mm Vertical travel Z-axis: 1,250 mm Table dimensions: 5,000 x 1,000 mm Table load capacity: 15,000 kg Rapid traverse X/Y/Z: 12,000 mm/min Spindle taper: ISO 50 Spindle power: 22 kW Spindle speed: 2 to 2,000 rpm Total connected load: 46 kVA Machine weight: 25T Machine dimensions: 7,600 x 3,900 x 3,200 mm Equipped with: Manual universal head Gjdpfx Aowvhk Ned Isbp

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, volume flow: 3.2 m³/h, filter area: 21 m², noise level: 67 dB, total height: 2,000 mm, total length: 2,360 mm, total width: 900 mm, overall weight: 770 kg, compressed air connection: 6 bar, extraction nozzle diameter: 200 mm, The SPÄNEX dust extractor type SMU 32 / 45 BA with container and discharge is a compact disposal station for disposal station for commercial use for installation in the work area. Consisting of: Dust extractor with vacuum-proof housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, high-performance radial fan arranged on the clean gas side with centrifugal fan with three-phase motor of energy efficiency class IE3 and integrated exhaust air sound attenuation Gbsdpet Ug Sgjfx Ad Isp and air outlet grille, charging container with 0.55 kW discharge device, a circuit with CEE appliance plug (phase inverter). The circuit is designed for automatic operation. The automatic start-up control for max. 6 machines and automatic cleaning of the filter with runtime addition are included. For the coils or potential-free contacts of the machine can be used for automatic start-up. can be used. Optionally possible: Conversion to chip collection container € 1,270.00 net alternatively: Installation of a branded rotary valve € 1,690.00 net

Condition: excellent (used), Year of construction: 2000, Spindle block Cross-drilling unit Pick-up Threading Iemca PRA bar feeder Gbedpfxoyz Di So Ad Isp Spindle bearings recently replaced

Condition: good (used), Year of construction: 2008, CNC Swiss turn Machine type: Citizen C-32 VIII 2M8 Year: 2008 Godjzim Evspfx Ad Isbp SPECIFICATIONS Main Spindle Max. turning length: 320 mm Turningdiameter: 32 mm Spindle speeds: 200 - 8.000 rpm Subspindle Spindle speeds: 200 - 7.000 rpm Driven Tools Equipment Bar loader magazine: FMB turbo 3-36

Condition: used, Year of construction: 1998, operating hours: 60,931 h, machine/vehicle number: 330_030901, Used Star SR-32 Year: 1998 Operating hours: 60,931 Serial no.: 330_030901 Internal no.: 231025 Control: CNC Fanuc 18i Tb Maximum machining diameter: 32 mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity (fixed tool): 13 mm Gedpezimw Ssfx Ad Iebp Drilling capacity (rotating tool): 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø10 mm Spindle speeds: 350 – 7,000 rpm (for driven and plain tools) Coolant: Oil CE declaration of conformity Operating and maintenance manuals Operating tools Note from seller: Fanuc transverse drive system is defective and has been deactivated by Star Micronics. Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 2,900 kg Includes: • Bar feeder FMB TURBO 5-42 (bar capacity: 5–42 mm, attachment variant "A") • Hinged belt conveyor MAYFRAN • Kraft & Bauer extinguishing system with 10 kg CO₂ extinguishing agent tank Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Loading magazine weight: approx. 1,800 kg Peripheral equipment & accessories dimensions: approx. 1,900 x 700 x 800 mm Peripheral equipment & accessories weight: approx. 200 kg The machine can be inspected under power by appointment. Technical data and information are subject to change and error. Prior sale reserved!

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm Gbedpfsu Nm Nijx Ad Iep - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW