Used Takeuchi Tb 216 ( 1.865Kg ) for sale (1,858)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total width: 7,500 mm, total length: 35,000 mm, overall weight: 32,000 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec combination line for jumbo-sized sheets with automatic storage and loading table: Iisdpez Abahofx Apceg Configuration: LBR - ATF - GFB RE S - LKT - BHK

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 90609919, Year of construction: 2020, operating hours: 267 h, load capacity: 1,600 kg, lifting height: 6,000 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,520 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 1,354 kg, Equipment: lighting, Jungheinrich EJC 216 Pallet stacker, year of manufacture 2020 with a Triplex mast and scales Details: Jungheinrich EJC 216 Year of manufacture: 2020 Work hours (h): 267 Mast type: Triplex Lift height (mm): 6000 Freelift (mm): 2000 Build height (mm): 2520 Initial lift: No Lift capacity (kg): 1600 Fork length (mm): 1150 Weight (kg): 1354 Front wheels: Polyurethane Rear wheels: Polyurethane Iijdpfx Aeyaavwopcog Battery YOM: 2020 Battery capacity (Ah): 375 Battery voltage (V): 24 Accessories: Power steering. Scales. Height counter. Flashing beacon. Load guard. Comments: Full freelift.

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. Iijdpfxsz Ahr Rj Apcjg The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7009, Our Cabinplant blanching machine was purchased as a used unit and has been in operation for 10 years. Maintenance and repairs have been carried out by our in-house technical team. The reason for selling is that we have upgraded to a machine with a larger capacity. It will be ready for use after a maintenance check. Our machine is currently available for sale in this condition and is located at our Bursa Kestel factory. Iijdpozyyppefx Apcjg

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Iiodpfx Apew Nvkisceg

Condition: used, Year of construction: 2007, control FANUC Series 18i-TB Iiodpozp Ry Refx Apcjg max. turning diameter 190 mm turning length 395 mm x-axis 162 mm y-axis 60 mm z-axis 450 mm Spindle speed - main spindle 5.000 U/min Spindle speed - counter spindle 5.000 U/min number of tool places 2 x 12 Pos. tool taper VDI 30 weight of the machine ca. 6.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools -CE marking -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted. Iiedpfx Apoznu Sbscog

Condition: good (used), Year of construction: 2011, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: S6CZ1151, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 29,000 W, bar passage: 65 mm, Equipment: bar feeder, documentation/manual, Year: 2011 Operating hours: 4,700 h (increasing) Turning diameter: 65 mm CNC type: Fanuc 18i-TB Number of turrets: 1 Axes: X, Y, Z, and C Number of turret stations: 12 Number of driven stations: 12 Main spindle and sub-spindle speed: 5,000 rpm Main and sub-spindle motor power: 29 kW Dimensions (L × W × H): 3,302.0 × 2,057.4 × 2,032.0 mm Weight: 5,700 kg Chip conveyor Iodpsxwp I Asfx Apcoig IEMCA MASTER 880r Verso bar feeder (3 m bar + loading magazine) Numerous fixed and driven tool holders included in the sale: _Axial driven tool holder: 3 _Radial driven tool holder: 4 _Swivel driven tool holder 0–90°: 2 _Fixed turning tool holder: 5 _Fixed drilling tool holder: 7 _Cut-off blade holder: 1 2 sets of chucks for jaw passage (main spindle and sub-spindle). The machine is currently in use but can be made available within 4 weeks. The machine is to be collected on site (Saint Pierre en Faucigny). Loading and transport costs are at the buyer’s expense.

Condition: used, Year of construction: 2015, operating hours: 24,952 h, CMZ TA 20 Y-400 Swing over bed / carriage: 760 / 600 mm Maximum turning diameter: 460 mm Distance spindle – wheelset: 473 mm Travel X / Y / Z / B: 310 / +70 / -50 / 640 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing outer / inner: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Isdpfx Ajymc U Ajpcsig Tailstock: Quill stroke: 400 mm Tool turret: 12 stations, all powered Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm CNC Control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (approx. L x W x H): approx. 2.5 x 1.8 x 2.1 m Weight: approx. 6 t Operating hours: approx. 24,952 hours Scope of supply: Bar feeder IEMCA KID 80/16, year 2018 Coolant unit

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Iedpfx Aozkgqzopcoig Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Isdpfx Aovvx Hiopceig Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2015, lifting height: 27,900 mm, fuel type: diesel, color: white, General information Field of application: Construction Weights Empty weight: 3.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.690 cm Dimensions of cargo space: 684 x 220 x 299 cm Make of bodywork: Nissan CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1620 m Production country: DE Additional information Please contact Christian Theißen for more information Iijdpfev Tklrjx Apcjg Manufacturer: Ruthmann Model: TB 270.2 Year of build: 2015 Condition: Used Data: Max. working height: 26,85 m Max. platform height: 24,85 m Max. reach: 16,25 m Total dimensions LxWxH: 6,84 x 2,20 x 2,99 m Platform dimensions LxW: 1,37 x 0,68 m Max. basket load: 230kg Swivel range: 2 x 225° Ground pressure: 31/21kN Ground clearance: 0,16 m Support width vertical: 2,20 m Support width one side: 2,84 m (in front)/ 2,94 m (rear Support width both sides: 3,51 m(in front)/ 3,66 m (rear) Support length: 4,14 m broad/ 3,12 m narrow Own weight: 3.300 kg Special features: Rotating work basket (2 x 85°), Socket in the work basket Request, engine On/off switch in the work basket, earthing possible, Automatic setup and retraction, memory function, tail lift. TÜV and UVV new Location: 41468 Neuss immediately available

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Iiedpfx Ajzktnyspcsg Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986

Condition: used, Year of construction: 2011, Used 2011 CMZ TB67 presented in immaculate and well maintained condition, and photo'd here whilst still in production...specified as follows: Technical Specifications: Max. Swing Diameter 640mm Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Spindle Size / max bar Ø: 66mm Power: 17.4 Kw Turret 12 positions. Iodpey Ui Iaofx Apcjig Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Dimensions (L x W x H): 1,653 x 1,620 x 1,670 mm Machine Weight: 3,700 kg Additional Equipment: Parts Catcher Swarf Conveyor Tailstock Tool Measuring Arm Suite of tool holders 3-Jaw Hydraulic Chuck Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Power: 17.4 Kw Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Weight: 3,700 kg

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. Iijdpfxezhwlqe Apcog • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible. Iedpsv Ubpqjfx Apcjig

Condition: ready for operation (used), Year of construction: 2012, VTL SC 27 CNC Chuck diameter 2500 mm Max turning 2700 mm Max heigth for piece 1900mm Weigth of piece 18.000 kg Isdpfx Aeiyzahepcjig Weigth of machine around 40 to

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Workholding fixtures and tools not included. Iiedpozxr Dcofx Apcsg AVAILABLE: November 2026

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 30 kW (40.79 HP), type of input current: three-phase, Item: DP-51241-AlfaLaval-LKH 70/216 SSS Brand: Alfa Laval Type: LKH 70/216/SSS/30kW Iiodpetk Hxwsfx Apcjg Serial number: 061159 Year: 2004 Engine: 30 kW

Condition: used, Year of construction: 2015, operating hours: 21,934 h, CMZ TC 35 Y-800 Swing over bed / carriage: 920 / 745 mm Maximum turning diameter: 550 mm Distance spindle – tailstock: 866 mm Travel X / Y / Z / B: 310 / +80 / −60 / 800 / 803 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 3,000 rpm Power: 45 / 39 kW at 1,500 / 1,273 Nm Bearing outer / inner: 240 / 160 mm Spindle bore: 106 mm Bar capacity: 95 mm Chuck diameter: 315 mm Tailstock: Quill diameter / stroke: 110 / 150 mm Travel: 800 mm Tool turret: Ijdjymc Tropfx Apcjig 12 positions, all with driven tools Maximum speed: 4,000 rpm Power: 16 kW Maximum torque: 75 Nm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 65 kVA Dimensions: approx. L x W x H 3 x 2 x 2.2 m Weight: approx. 8.3 t Operating hours: approx. 21,934 hrs Scope of supply: Bar feeder BREUNING IRCO ILS-MUK 10016-II, year 2015 Coolant unit

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 100864, Technical Specifications: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading nests per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100/40% duty cycle: 18 / 27 kW - Torque at 100/40% duty cycle: 202 / 303 Nm Iodpfjxxttfex Apcsig Tool Turret with Driven Tools - Tool holder shank according to DIN 69880: 12 - VDI40 - Number of turret positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical Design: Ensures optimal chip evacuation and easy loading/unloading operations. - Control System: GE Fanuc Series 18i TB. - High Precision: Positioning accuracy in X and Z axes: ±0.001 mm (Heidenhain linear scales). - Main Spindle: High power and wide speed range. - Automated Loading/Unloading: Parts are automatically fed and removed via integrated automation. - Driven (live) tools: Enables drilling and milling operations in addition to turning. - Chip conveyor included. - Documentation: Electronic manual not available; printed book manual available. Machine Status: Operational, in working condition.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN648521, Year of construction: 2021, operating hours: 9,099 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,450 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,025 mm, power: 9 kW (12.24 HP), motor manufacturer: Jungheinrich, gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 48V 5 PZS 625 Ah, battery capacity: 625 Ah, remaining battery capacity: 80 %, battery voltage: 48 V, battery weight: 813 kg, DGUV certified until: 07/2027, fork length: 1,200 mm, turning radius (inner): 150 mm, tire condition: 85 %, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), overall weight: 3,200 kg, empty load weight: 2,350 kg, total height: 2,025 mm, color: yellow, Equipment: CE marking, adjustable boom, all wheel drive, centralized greasing system, front guard, gripper hydraulics, head guard, pallet forks, retractable fork, sideshift, trailer coupling, Premium Jungheinrich EFG 216K compact model forklift, ideal for warehouses with narrow aisles. Year 2021 / 9099 operating hours, triplex mast, side shift, 85% battery capacity, automatic CurveControl system, dual-motor drive on the front axle. In excellent condition, both cosmetically and mechanically. Iiodpfxezlavtj Apceg

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, Nakamura-Tome Turning Center 2 axes, X and Z Model: SC-250 Year: 2007 CNC: Fanuc Series 21i-TB Chip conveyor: ✅ Hydraulic steady rest: ✅ Iodpfjz Alqkox Apcoig FILTERMIST FX4000 oil mist extractor, mounted on the machine, with mounting bracket and suction system. Enables the extraction of oil mist and cutting fluid mist during machining.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M301809, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 780 mm # Distance between spindle noses: min. 250mm/max. 1100mm # X1/X2 axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2 axis travel: 780 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/- 60 mm / Rapid traverse Y: 30 m/min # B-axis travel (Right Spindle): 850 mm / Rapid traverse B: 30 m/min Spindles # Spindle DIN 55026: Size A26 # Max speed: Left 4,500 rpm / Right 4,500 rpm # Power with 100% ED: Left – 15 kW / Right – 15 kW # Main spindle feature: Optional dual-stage clamping cycle # Bar capacity: Left spindle - 80 mm / Right spindle - 80 mm Tool Holder with Driven Tools # Tool interface: BMT55 # Number of positions: 12-station disc turret, all positions driven # Max speed: 3,600 rpm, Milling drive power: 5.5 kW Electrical Equipment # Operating voltage: 400V 3-phase, fuse 217A GL # Connected load: 71.9 kVA Dimensions # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm Ijdpfexxv A Aex Apcoig # Weight: 14,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and straightforward loading/unloading # CNC Control: Fanuc 18i-TB 2CPU, 2-channel control # Upgraded hydraulic unit: Hazabal S.L. GH1018/008 # Chip conveyor # Bar feeder interface # Automation interface available # Documentation: Electronic and hard copy available Machine status: Operational (in production)

Condition: used, Year of construction: 2007, functionality: limited functionality, machine/vehicle number: P-30008793, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading nests by workpiece Ø: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle mount: DIN 55026, size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Toolholder shank per DIN 69880: 12 stations – VDI40 - Number of positions: 12 - Maximum tool length incl. holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, at 25%: 26 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: L=2,680 mm (3,820 mm with chip conveyor), W=2,040 mm, H=2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - Control: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High torque and wide speed range Iisdsxxr Rpepfx Apcjg - Automated loading/unloading: Integrated automation feeds and removes parts - Driven/live tools: Enables drilling and milling operations in addition to turning - Chip conveyor - Documentation: Electronic not available, paper manual available Machine status: WORKING - Operator panel safety switch broken