Used Single Heaters By Single, 4 Units for sale (79,315)

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: Lsdpfjfnvvisx Abzohl - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 Lhedpfsg Ey Ufex Abzjl -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 40900 € 781.19 € 2050 mm 10 mm 10 mm 8 mm 8 mm 6 mm 200 - 220 mm 200 - 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Ljdpfx Abjynmyfozehl Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 127400 € 2407.86 € 220 to 4050 mm Y1 / Y2 / X und R Achse 265 mm 3600 mm 410 mm 530 mm hydraulisch 200 mm/s 12 mm/s 180 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 5250 mm 1770 mm 2900 mm 15000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD Ledpfx Aeynm Amobzjhl - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 103100 € 1948.59 € Lodsynm Euepfx Abzjhl 2550 mm 25 mm 25 mm 20 mm 20 mm 16 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 5500 mm 2000 mm 1900 mm 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 13760 € 264.19 € 0.4 - 2 mm 400 mm 300 mm² 63 mm 150 m/min 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Lsdpjynncnefx Abzshl Option: Handwheel and Simlinx remote maintenance module € 4.290,--

Condition: new, neu Lsdpfxoynnf Aj Abzehl ca. 8 Wochen ab Auftragse Türkei 31080 € 593.63 € 0.4 - 3 mm 400 mm 1200 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7700 € 148.61 € 80 to Lhjdpfjypbqzjx Abzsl horizontal verschiebbar 250 mm 1040 mm 865 mm 200x120 mm 5 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € Lhedpeypbwhsfx Abzol 125.45 € 60 to fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended Lhodpfxjyb Sz Ie Abzel

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei Lodpowirynsfx Abzjhl 94900 € 1793.61 € 4100 mm 13 mm 8 mm 350 mm 8 1/min 1.75 ° 18 62 to 1000 mm 200 mm/s 30 kW 330 l 3 Stk. 818 mm 550 mm 4520 mm 5350 mm 2250 mm 3650 mm 2250 mm 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm Ledjyb Sywepfx Abzjhl 7 mm 7 mm 5 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 31600 € 603.56 € 2050 mm 6 mm 6 mm 4 mm 4 mm 3 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 4250 mm 960 mm 1100 mm 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Lsdpfsyb Szbjx Abzshl Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 46300 € 884.33 € 2050 mm Lhedpfxjyb Szuo Abzel 11 mm 11 mm 9 mm 9 mm 7 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 43550 € 831.81 € 1550 mm 12 mm 12 mm 10 mm 10 mm 8 mm 220 mm 200 mm 160 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules Lhodeynmx Iopfx Abzsl OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 73200 € 1383.48 € 2050 mm 20 mm 20 mm 16 mm 16 mm 12 mm 280 mm 280 mm 220 mm 1,5 / 5 m/min 16.5 kW 4350 mm 1700 mm 1850 mm 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds Ledpfjynmylox Abzjhl central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Lhodpfx Aboynm D Rezol 60600 € 1145.34 € 3100 mm 10 mm 10 mm 8 mm 8 mm 6 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1550 mm 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 111500 € 2107.35 € 3100 mm 20 mm 20 mm Lodpfx Ajynm Ebebzehl 16 mm 16 mm 12 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 6000 mm 2200 mm 1900 mm 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Lsdpfoynm Ezsx Abzehl 27800 € 530.98 € 3030 mm 4 mm 4 mm 2 mm 180 mm 4 kW 4600 mm 1120 mm 1020 mm 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu ca. 12 Wochen ab Auftrags Ljdpfxsynnhkj Abzshl Türkei 10800 € 207.36 € 35 mm 137 mm 137 mm 3 1.1 kW 7 m/min 35x8 mm / 300 mm 50x12 mm / 400 mm 18x18 mm / 250 mm Ø 22 mm / 200 mm Ø 40x1,5 mm / 500 mm 30x15x2,5 mm / 500 mm 25x25x2 mm / 450 mm 35x35x5 mm / 400 mm 30x30x4 mm / 550 mm 1050 mm 500 mm 1250 mm 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7000 € 135.1 € 80 to fix 250 mm 1040 mm 200x120 mm 5 mm/s 10 mm/s 1810 mm 750 mm 2100 mm Ledpfx Ajypbtvebzjhl 835 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 32480 € 620.37 € 1550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 180 mm 180 mm 150 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control Lhedpfx Absynmzpjzel IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53700 € 1014.93 € 2050 mm 16 mm 16 mm 13 mm 13 mm 10 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 4300 mm 1600 mm 1550 mm 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control Lhedpfjynm Ehex Abzjl IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu Lhsdpfsynm Enjx Abzjl ca. 12 Wochen ab Auftrags Türkei 97400 € 1840.86 € 2050 mm 30 mm 30 mm 25 mm 25 mm 20 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 5000 mm 2000 mm 1900 mm 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52700 € 996.03 € 2550 mm 10 mm 10 mm 8 mm 8 mm 6 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1470 mm 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended Lsdoyb Sykepfx Abzshl