Used Sick C40S-1301Aa030 + C40E-1301Bh030 for sale (250)

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, total width: 2,480 mm, Equipment: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick loading surface, hydraulically liftable and lowerable loading area behind the gooseneck, approx. 2,800 mm long, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) over the axles, checker plate covering Two-part steel ramps: * One pair galvanized two-part steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on an area of appr. 20 x 20 cm) Gbodpfey Nu Hksx Abgon * Ramps with hydraulically extendable and retractable sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not have to be included in the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Colors: * Trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel carrier under the loading area, right-hand side in direction of travel * 2-inch kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holders on the front wall * 3 levels of wooden slats * Galvanized folding supports under the rear slope of the loading platform * Adjustable curtain body height approx. 3,960 mm * Galvanized front wall with tension mechanism for sliding curtains * Roof from EDSCHA, adjustable in height by approx. 400 mm, can be slid forward on aluminum roof beam profiles (bolted to front and rear wall) * 3 pairs of sliding stakes in the loading area * Body hydraulically extendable by approx. 750 mm left and right at the rear * Sliding tarp with approx. 700 mm length reserve, tension straps at approx. 600 mm intervals in height * Top edge of body approx. 3,960 mm (laden) * Driving with open sliding roof is not permitted and will damage the tarp * A painted sand layer as anti-slip coating on the gooseneck and loading area checker plates * Cover plates to bridge the gap between ramps and loading area * Electro-hydraulic unit at the rear under the loading area * Mountings for warning boards, including socket, on the left and right of the gooseneck and ramps * Ramp control valves installed on the right side of the trailer * Grating in the gooseneck slope C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the load f

Condition: used, mileage: 499,945 km, power: 120 kW (163.15 HP), first registration: 01/2012, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, tail-lift, Vehicle number (for inquiries): 96 Mercedes-Benz Sprinter 316 CDI Paint code: * 9147 Paint color Arctic white MB 9147 Interior: * VH5 Fabric Lima black Gjdpfx Abevui Arjgsbn Equipment: * AI1 Control code rear axle ring gear 215 * AR2 Axle ratio I = 3.923 * BB3 Electronic stability program (ESP®) * C21 Two-stage rear spring * C40 Front axle stabilizer * C47 Reinforced shock absorber * C95 Elimination of underrun protection * CT1 Vibration damper * E07 Hill start assist * E28 Additional battery for retrofitted consumer * E33 Battery management * E36 Isolating relay for additional battery * EE8 Battery 12V 100Ah * EJ2 Audio 20 * EK1 Terminal block for electrical connection * EL8 Two-way front speaker * ES0 Jump start contact * EV3 Pre-installation for electric. Scope of the tail lift * F66 Lockable glove compartment * F68 Heated and electrically adjustable outside mirrors * FF5 Storage above the windscreen * FHS driver's cab * G40 Automatic transmission * H12 Hot water auxiliary heating / auxiliary heating (Webasto) * H20 Heat-insulating glass all around * HH9 Semi-automatic air conditioning system Tempmatic * IG3 Sprinter Standard * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IR2 Wheelbase 3250 mm (BM-forming code) * IT4 3.5 ton truck * J10 Speedometer km/h * J58 Seat belt warning device for driver's seat * J65 Outside temperature display * JD1 Digital tachograph EG * JW6 Service interval display ASSYST * KL1 Tank sender for auxiliary heating * L06 Automatic headlight switch-off to parking light * L16 Halogen fog lights * L72 Electrics for body interior lighting * L76 Tail light cable extended * L90 Tail lights eliminated * LB1 Side marker lights * LE1 Adaptive brake light * M49 Generator 14V/180A * MD4 Speed limit 90 km/h, EC * MG3 Engine OM651 DE 22 LA 120 kW (163 HP) * MP5 Engine version Euro V * MS1 Cruise control * OA3 Customer service measure diesel tax code 1 * PV1 Preparation for subsequent installation of tail lift * Q67 Rear towing eye * RF1 Tires made by Continental (10) * RH2 Tires 235/65 R16 C * RR7 TIREFIT * RS3 Steel wheels 6.5 J x 16 * S22 Armrest for driver's seat, ISO-fix (child seat fastening system) * S23 Passenger seat two-seater * S78 Grab handle for interior seat on two-seater * SA5 Driver airbag * SA6 Passenger airbag * SB1 Driver seat comfort * V85 Smoker package * XG4 Weight variant 3,550 kg * Z41 Registration as a truck You can also find other vehicles on our homepage:

Condition: used, Year of construction: 2010, Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Gbodpfxowblk Re Abgen Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor Gbedpoicnicefx Abgon adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: used, Year of construction: 1998, power: 40 kW (54.38 HP), input voltage: 400 V, input current: 58 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, Electrically heated Nabertherm N 825 / AS furnace with a drop-down door. Maximum temperature: 750 °C Gbedezb Dqzspfx Abgsn Power: 40 kW Programmable controller: Nabertherm C40

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, Gjdpfx Ajyt H Awobgsbn ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2000, AMADA PROMECAM MODEL HFE 8025 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 80 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2500 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V000426 Gjdjzbzq Sopfx Abgobn GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2000 price POA

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm Gbodswcd Spopfx Abgen

Condition: excellent (used), Year of construction: 2001, year 2001 price POA stock no. 01859 specification 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 Gbodpfx Aezbqn Hobgjn description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Gbedpfowag Riox Abgon Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Gbedpfou Nfmyjx Abgen Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control * Gedpfx Abeu Nu R Isgebn

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley Gsdpfsu Nfn Rox Abgsbn - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: good (used), functionality: fully functional, cutting width (max.): 132 mm, Equipment: documentation/manual, Paper cutting machine for sale. Brand: Perfecta Seypa 132. Equipped with Gergek computer control system, type six plus, and safety sensors from Sick. Includes an air table. Comes with 3 extra knives and all manuals. You are welcome to test this machine at our location. We can arrange transport and packaging and load it into a truck or container for you. Please inquire for a price including transport (location within the Netherlands). Godpfxozar Avj Abgobn Best regards, Henk Hoos.

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Cutting system for extruded products: 1. NCK-500 HAUL-OFF + CUTTING UNIT (1 pc) Min. Length (mm) Speed (m/min) Gedpfx Abjzarn Eogebn 180 mm 35 m/min 300 mm 60 m/min General Features - Haul-Off System: Band type - Contact length: 500 mm (special PU coating) - Contact width: 80 mm - Haul-off motor power output: 2 pcs EMF Torque (for each band) - Working range: 5-90 mm - Operating speed: 60 m/min (Operating speed can be adjusted as desired.) - Cutter motor output: 1 kW (Siemens V90 series servomotor and Siemens servo driver) - The working range can be adjusted according to the thickness of the material being processed. - The lower and upper bands will be separately controlled by torque motors and will move synchronously thanks to this system. There will be no belt-pulley in the system to control the tractor belts; the bands will be controlled separately with torque motors. - SICK brand 1024 pulse Encoder will be used for line speed control. - The lower pallet system is fixed, the upper pallet system is movable. - The pulling bands shall be coated with Linatex rubber raw material. - The haul-off unit is controlled by a PLC controller. - The circular saw's servo motor will be PLC-controlled, 1 kW servo motor (Siemens V series). - The upper and lower covers of the water tank with knife shall be made entirely of stainless material. - Cutting tolerance +/- max. 2 mm. - Haul-off covers and cutting blade housing cover are equipped with Pilz brand safety magnetic door sensors. - Pilz brand safety relay is standard in the electrical control panel. - Electrical control panel is manufactured in accordance with Category 4 class standards. - Electricity supply is compatible with 380-400V / 50Hz. - Complies with CE/uL standards. PLC System Features ● A 7'' Weintek touch screen operator panel will be used. Thanks to this panel, the machine will be fully controlled. From the touch screen on the unit operator panel: ● Length to cut ● Pieces to be cut ● Line speed reel view ● Dancer reel position ● Cutting blade magnitude adjustment ● Reel length information ● Order list ● Breakdown information - Fault information is clearly displayed. - There will be an ENG language option. - The unit keeps the number of cuts in its memory since the first operation. - Special menus which are suitable to your current system can be added on the operator panel. Buttons on the Unit - Haul-off Start/Stop - Cutter Start/Stop - Caterpillar move Up/Down - Safety reset - Man/Auto - Speed +/- - Emergency Stop Inter-Bands Distance Adjustment: The lower band system is controlled manually.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,844 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5995 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Godpfjzafqtox Abgjbn Operating hours: 1844 hours Battery capacity: 48 V / 620 Ah Options: - Triplex mast – full free lift (FFL) - PSA (Sick) - Induction / wire guidance Condition: LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,201 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5993 Category: Demo Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Operating hours: 1201 h Battery capacity: 48 V / 620 Ah Options: - Triplex mast – FFL Gbodpjzafqmefx Abgjn - PSA (Sick) - Induction / wire guidance Machine LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID:23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Battery capacity: 48 V / 620 Ah Options: - Triplex mast – FFL - PSA (Sick) - Inductive / wire guidance CONDITION: LIKE NEW! Gbedpozafpcsfx Abgen

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Category: Used Gbedpfx Abszafn Segjn Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 h Battery capacity: 48V / 620Ah – Year 2021 Options: FULLY equipped!! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION!! – Adjustable forks! – PSA (Sick) – Induction / Wire Guidance – End position sensors on mast Condition: LIKE NEW!!!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Gbodpezafn Esfx Abgon Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Battery: 48 V / 620 Ah - Year 2021 Options: FULL options!! - Triplex mast - FFL - Safety doors with tilt function!! - Adjustable forks! - PSA (Sick) - Induction / wire guidance - End position sensors on the mast Machine LIKE NEW!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Operating hours: 3483 hours Battery capacity: 48 V / 620 Ah - Year 2021 Options: FULLY equipped!! - Triplex mast - FFL Godpfx Abszafnxjgebn - SAFETY doors with TILT FUNCTION!! - Adjustable forks! - PSA ( Sick ) - Induction / wire guidance - End position sensors on mast Complete LIKE NEW!!!

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm Gsdjtqqq Repfx Abgobn table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: new, pressing force: 280 t, 280 t servo double-column heated press with heating plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled an order for two identical machines. This gives you the opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown depict similar, previously built machines from the factory and are for reference purposes only. Technical data & information: ==== General information Press force: 280 t Design: servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides Clear width between uprights: 1,250 mm Gedpfx Abeyynalogobn Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 900 mm Overall height approx.: 3,500 mm Width incl. control cabinet approx.: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Fixed lower table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump capacity: 72 l/min Motor power: 10 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Travel measurement: encoder Pressure measurement: data recording ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure-holding function for up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heating element control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Stroke limitation via Leuze measuring rod and monitor Two-hand operation Ram return via operating button Light curtain protection front and rear up to 2,500 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems by Sick / Pilz / Keyence / Datalogic ==== Additional included features 40 mm thick base plate with chamfered ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression molding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, lamination processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression molding press, press with heating plates, industrial machine, special machine, tool adjustment press, tryout press, tool try out press.

Condition: new, Year of construction: 2026, pressing force: 100 t, pressure:100 t Gsdpfx Asfu Nqxobgsbn passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Godjgrkigspfx Abgsbn Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.