Used Shrink Fitting System C for sale (75,297)

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Substructure: Stable, lightweight aluminum construction. Longitudinal and transverse supports made of aluminum. The substructure is connected to the chassis in accordance with the truck manufacturer’s guidelines. External frame with lashing eyes. Floor: Consisting of 18 mm thick vehicle construction panels, film-coated on the underside to prevent moisture penetration, and with a non-slip, screen-printed ribbed surface on the top. The panels are laid in flush and sealed around the perimeter. Front wall: Closed with corner posts extending to below the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is mounted in specially shaped profiles both at the top and at the bottom. The side walls can be easily moved thanks to the roller carriages located inside. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped transverse beams in a 400 mm grid, with a tarpaulin above. Impact protection: Aluminum strips attached on both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including splash guards Holder for wheel chocks Red position lights above the rear portal on the left and right as LEDs 3rd brake light in the center above the rear portal doors as an LED Contour marking according to ECR R48, white on the sides and red on the rear, stripe width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescoping rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guide). Mounting of locking bars on the additional locking bars on the right and left, made of aluminum square tube, for load securing in the longitudinal direction. Interior lighting Itodpfx Aajzhdk Tj Esi 1 LED light strip, in the center of the superstructure, including connection to the cab switch. 2-leaf rear door Made of aluminum sandwich panels with internal rotary locking mechanisms. The doors have a smooth surface (ideal for lettering). Locking bars for the row of holes in the outer frame 4 pieces per side, mounted with a flange and stop nut (more can be installed on request). Side impact protection Side flank protection, holder galvanized and foldable, planks anodized. Rear view camera Rear view camera, connected to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, mileage: 674,575 km, power: 265 kW (360.30 HP), first registration: 08/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Telligent/Climate control/Retarder/Differential lock/Adaptive cruise control/Crash barrier/2 beds/Refrigerator ----Manufacturer System Trailer Type SL10 Vehicle type 1-axle box semi-trailer First registration 10/2017 Tire size 235/75 R17.5 Axle design SAF / Air Gross vehicle weight 25000 kg Unladen weight 6650 kg Payload 18350 kg Body 10.45x2.55x4.00m Equipment ABS, EBS, steering axle, rear liftgate BÄR BC 2000kg ----Special equipment: Aero kit, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, battery 225 Ah, battery disconnect switch mechanical, curb mirror right electrically adjustable and heated, differential lock rear axle, ETA circuit breaker, cab: with air suspension, driver's seat comfort, air-suspended and heated, with lumbar support and shoulder adjustment, fire suppression system, rocker arm - brake EVBec controlled, heated air dryer, auxiliary heater Eberspächer D4S, exterior sun visor, sound system, auxiliary air conditioning unit, cab socket 12V and 24V, door extension for cab, additional fog lights with cornering lights Further equipment: Axle configuration: 4x2, ambient lighting, approach/front mirrors, trailer socket 24V / 7-pin, anti-slip control (ASR), audio system: Radio MAN Media Truck Advanced 12V with navigation system preparation, on-board computer MAN-Tronic, electronic brake system MAN-Brakematic, EURO 6 engine, cab: with Nordic insulation, cab: XLX, suspension: air / air (full air), power windows, remote control central locking, windshield tinted, generator 28 V 80 A, gearbox 16-speed - type: ZF 16 S, tilting roof mechanical, body/superstructure: semi-trailer tractor, rocker arm - brake EVB, automatic climate control, fuel filter heated, fuel tank: combination tank - 400 liters diesel + 60 liters urea solution (AdBlue), steering wheel with multi-function buttons, air intake raised, air compressor 1-cyl. 360 ccm, engine 10.5 liters - 265 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, spare wheel jack side, fifth wheel coupling: Jost JSK 37 C, disc brake rear axle, disc brake front axle, rear side windows tinted, seat cover / upholstery: comfort quality, sun visor for windshield, sun visor side window, driver's door, spray mist reduction, stabilizer on one rear axle, storage box accessible from outside, control type cab, TGX, door windows tinted, underrun protection front, viscous fan, central locking, Permissible total weight 18.00 t---- As inspected or offered, without further services / accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! Vehicle may be covered with advertising and/or lettering. Our general delivery and payment conditions apply. We will support you with the export, preparation of export documents, procurement of license plates, supplier declaration, etc.! The information given in advertisements, on the internet, in price lists and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability / warranty for typing and data transmission errors. Listed equipment may need to be checked separately. We expressly reserve the right to make interim sales, as we also offer this item on other portals. Accessory information without guarantee. Changes, interim sales or errors excepted. We offer and recommend. Itedpjzg Eihofx Aa Esi

Condition: good (used), Year of construction: 2014, Ref. no.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. Itjdpfx Aey Tliwsa Eei FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a running plastic production line and is in clean and good cosmetic condition. The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems. The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS INCLUDED IN THE SYSTEM Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies. Technical Details • Brand: Aerzen • Model: GM15L • Year: 2014 • Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • High-efficiency German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for centralized vacuum systems Rittal Industrial Control System The system is equipped with a Rittal industrial control cabinet. Rittal is a globally recognized premium brand in industrial automation and control systems. Features • Industrial control cabinet • Operator control system • Integrated safety circuits • CE-compliant construction Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Safe working area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems. Technical Details • Brand: DMN Westinghouse • Model: ALD 200-6 • Low-dust controlled material transfer • Suitable for granule and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for centralized conveying systems

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Iodpfxexhfuas Aa Esti Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: ready for operation (used), easyLINE 2-axis system: X-axis: 140 mm, Y-axis: 120 mm, complete with connecting cables, used, minimal signs of wear, 100% functional. Isdpfx Aoi D Uqlsa Ejti

Condition: ready for operation (used), CTX125 X-RAY system control unit, used, normal signs of wear, 100% functional, scope of delivery according to photos Itsdpfxol Ech Tj Aa Eji

Condition: ready for operation (used), Keyence CA-E100T Vision System SN:BA710081, used, in good condition, 100% fully functional, scope of delivery as per photos Itsdpfx Asx Et Acsa Eoi

Condition: ready for operation (used), Keyence XG-X2800 Vision System SN:CA711377, used, in good condition, 100% fully functional, delivery scope as per photos. Itedpex Et A Nefx Aa Eoi

Condition: ready for operation (used), Siemens SINUMERIK System 3 3T / 570 025 9031.11 / 6FC3888-5NB 12" operator panel, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Itsdpfx Asx Eu Rnja Eji

Condition: ready for operation (used), Atlas Copco PF4000-C-PN-HW control system. 8433 7148 05 SN D 276 108, used, minor signs of wear, 100% functional, scope of delivery as per photos Itsdpjrv Nz Aefx Aa Esi

Condition: ready for operation (used), Keyence CA-E100T Vision System SN:BA710085, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Itedpfjx Et Aiox Aa Esi

Condition: ready for operation (used), Siemens 6FX1113-0AA00 Sinumerik System 8 SM100 CPU, version F, used, 100% functional. Itsdoi Ed Izjpfx Aa Eei

Condition: good (used), mileage: 361,600 km, power: 309 kW (420.12 HP), first registration: 02/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2017, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Notes = Coming soon; MAN TGS 35.420 8x2*4 - HMF container system - Euro 6 - Automatic Year of manufacture: 27-02-2017 Mileage: 361,600 WMA90SZZ8HM732811 HMF container system Side tipper Euro 6 = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread left: 40%; Tire tread right: 40% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread left: 40%; Tire tread right: 40% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13000 kg; Tire tread left (inside): 80%; Tire tread left (outside): 80%; Tire tread right (inside): 80%; Tire tread right (outside): 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Lift axle; Max. axle load: 10000 kg; Tire tread left (inside): 30%; Tire tread left (outside): 30%; Tire tread right (inside): 30%; Tire tread right (outside): 30%; Suspension: Air suspension Weights Unladen weight: 12,150 kg Payload: 19,850 kg GVWR: 32,000 kg Itsdjzfvf Dspfx Aa Eoi Condition Technical condition: good Optical condition: good

Condition: used, mileage: 291,121 km, power: 210 kW (285.52 HP), first registration: 11/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,400 mm, loading space volume: 21 m³, Equipment: ABS, air conditioning, parking heater, MB Econic 2629 L/ Body: Haller M21x2C/ Attachment: Zoeller System 321 Operating hours: 22,413 Equipment: * Radio * Camera / Monitor * Air conditioning * Heated seats Itsdpfx Aoy Sacpoa Esi * Cruise control * Electric windows * ZSA * Side underrun protection * Rotating warning beacon (RKL) * Turn assist +++ Signs of use and operational wear +++ Municipal first ownership +++

Condition: used, Year of construction: 2022, TOYOTA Shelves - console system/double-sided, 27 shelves, height 7.5 m Isdpfx Ajytnbzea Esti

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. Itsdpfoyvac Ajx Aa Eoi 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: not inspected (used), functionality: unexamined, Modular, touch-screen system delivers precise pattern control, quality verification, or both. Collection of Nordson Logocomm control systems with two 4-channel controllers and two industrial monitors. We acquired an inventory of hot melt equipment, which included these controllers. Since we will not be using this ourselves, we are offering it for sale. Items are sold without warranty, as is where is. Itsdpsy Rtbcefx Aa Eoi

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 03139, We offer a professional, immediately ready-to-use metallization solution. The equipment can be purchased as a complete package or individually. Details of the equipment: Metallization system: Margarido M45 Manufacturer: Margarido (Sesimbra, Portugal) Model: M45 Year of manufacture: 2021 Power: 11.8 kW Condition: Unused and in very good condition. Features: Mounted on a robust, mobile trolley for maximum flexibility. Individual price: €25,000 (plus VAT) Compressor: Atlas Copco GA37 VSD+ FF Type: GA37 VSD+ FF Operating hours: 12,100 hours Itedpfx Aaszdqz Ds Esi Condition: Used, very well maintained and immediately ready for operation. Individual price: €15,000 (plus VAT) Summary: Location: Kiel Total price (when purchasing both units): €40,000 (plus VAT) The equipment can be inspected and tested on-site by prior arrangement. If you have any further technical questions or are interested, please contact us directly.

Condition: used, ISAM ESAB submerged arc welding system for cylinder coating No. 01 ESAB submerged arc wire welding systems No. 01 ESAB welding sources mod LAF 1250 DC (output 40 – 1250 A – NOMINAL POWER 1250 A/44V/100%) Nr 01 Command pulpit No. 01 positioned for rollers with a diameter of approximately 400 x approximately 4000 mm Sand supply system for submerged arc welding Itjdpetq Ar Tefx Aa Eji Matr 208202

Condition: excellent (used), 7.5m Stow Pal Rack Pallet Racking A highly stable, industrial pallet racking system from the premium manufacturer Stow, designed for the safe and compliant storage of heavy Euro pallets. Itodpfxjzc Nile Aa Eei Manufacturer: Stow Type: Pal Rack System Rack length: approx. 7,500 mm Upright height: approx. 4,500 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P (robust, torsion-resistant profile design) Clear bay width: 3,600 mm (optimized for exactly 4 Euro pallets side-by-side) Number of bays: 2 Number of storage levels: 4 levels per bay (floor position + 3 beam levels) Beam type: PNB 0436 (3,600 mm length) Max. pallet weight: 1,000 kg (evenly distributed) Permissible bay load (shelf load): 4,000 kg per pair of beams Permissible total bay load: 20,000 kg Upright finish: Blue powder-coated (RAL 5015) Storage capacity: 16 Euro pallets per bay / 32 Euro pallets total capacity Safety/Plausibility Check: With the 3 beam levels fully loaded, the actual bay load is 12,000 kg. The system therefore operates safely well below the static load limit (20,000 kg). Scope of delivery: 3 x Uprights 4,500 x 1,100 mm (bay load 20,000 kg, blue) 12 x Beams 3,600 mm incl. locking pins (beam load 4,000 kg, orange) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), 11.2m Stow Pal Rack Pallet Racking A highly stable, industrial pallet racking system from the premium manufacturer Stow, designed for the safe and compliant storage of heavy Euro pallets. Manufacturer: Stow Type: Pal Rack System Rack length: approx. 11,200 mm Upright height: approx. 5,000 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P (robust, torsion-resistant profile design) Clear bay width: 3,600 mm (optimized for exactly 4 Euro pallets side-by-side) Number of bays: 3 Number of storage levels: 4 levels per bay (floor level + 3 beam levels) Beam type: PNB 0436 (3,600 mm length) Max. pallet weight: 1,000 kg (evenly distributed) Permissible bay load (per pair of beams): 4,000 kg Isdpfx Aajzc Nfgj Esti Permissible total bay load: 20,000 kg Upright finish: Blue powder-coated (RAL 5015) Storage capacity: 16 Euro pallets per bay / 48 Euro pallets total capacity Safety verification: With the 3 beam levels fully loaded, the actual bay load is 12,000 kg. The system therefore operates safely well below the static load limit (20,000 kg). Scope of delivery: 4 x Uprights 5,000 x 1,100 mm (bay load 20,000 kg, blue) 18 x Beams 3,600 mm incl. locking pins (load capacity 4,000 kg, orange) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Itodpfepvk Diox Aa Eei Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: excellent (used), 11.2m Stow Pal Rack Pallet Racking A highly stable, industrial pallet racking system from the premium manufacturer Stow, designed for the safe and compliant storage of heavy Euro pallets. Manufacturer: Stow Type: Pal Rack System Rack length: approx. 11,200 mm Upright height: approx. 4,250 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P (robust, torsion-resistant profile design) Clear bay width: 3,600 mm (optimized for exactly 4 Euro pallets side-by-side) Number of bays: 3 Number of storage levels: 4 levels per bay (floor level + 3 beam levels) Beam type: PNB 0436 (3,600 mm length) Max. pallet weight: 1,000 kg (evenly distributed) Permissible bay load (per level): 4,000 kg per pair of beams Permissible total bay load: 20,000 kg Upright finish: Blue powder-coated (RAL 5015) Storage capacity: 12 Euro pallets per bay / 36 Euro pallets total capacity Safety verification: With the 3 beam levels fully loaded, the actual bay load is 12,000 kg. The system therefore operates safely well below the static load limit (20,000 kg). Scope of delivery: 4 x Uprights 4,250 x 1,100 mm (bay load 20,000 kg, blue) 18 x Beams 3,600 mm incl. locking pins (load capacity 4,000 kg, orange) Itedpfx Aaezcw U As Eei You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm Iedpfxszcmcve Aa Eoti 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Isdpfjyzxgfjx Aa Ejti Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.