Used Seidner Form & Test Test Device, Testing Machine for sale (77,246)

Condition: ready for operation (used), Year of construction: 2014, A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible. Iiodpoxuiuqjfx Apcsg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Iedpexqxt Iofx Apceig Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Iiodpfszzwpvex Apceg Max. tube diameter: approx. 40 mm Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: ready for operation (used), Year of construction: 1987, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible. Iodpfx Apjw H At Tscjig

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet Isdpfxeybtnvs Apcjig - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph Iijdpfewtqrwox Apcjg

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Iodpfxewa A Tto Apceig

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Two-lane machine, manufactured by Heiber & Schröder, Germany. Isdpezz Hgkjfx Apceig Manufactured in 2011. Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system.

Condition: ready for operation (used), GehoTM 800 D Film Sealing Machine / Foil Sealer Foot Pedal Operation Ijdpfxoxfh D Ee Apceig Seam Length: 820 mm Seam Width: 3 mm With integrated cutting device You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided that a valid VAT ID number is available. Subject to prior sale. Visit our shop and browse our additional offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Technical specifications and item descriptions may be subject to errors or deviations. We reserve the right to make changes.

Condition: good (used), Year of construction: 2013, operating hours: 300 h, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input Iiodpfx Ajq Ruw Nopceg - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. Ijdpfx Apexugf Hscsig This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Iisdpfxeytn Hke Apceg Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: ready for operation (used), Year of construction: 2005, Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible. Iiedpfswal Igex Apcjg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning Iedpfx Apoyc U Dbeceig - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Iisded R Dpuspfx Apcjg Weight: approx. 40 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a keypad, allowing for a “quick test” even without a PC. For tests that require data storage and a record of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Iedpfx Apeukitxocjig Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength testing machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression: 2.5 kN Height (h1) approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolt) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Iedjzdry Ijpfx Apcjig Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1991, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible. Ijdpsw H Audefx Apceig

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, GEA MultiFormer 400 | Plate Former Manufacturer: GEA Food Solutions Bakel B.V. Iedpfxjy Sbzme Apcsig Model: MultiFormer 400 Machine No.: E022110205415 Year of manufacture: 01/2021 Machine weight: 1200 kg Power supply: 380–415 V, 3-phase, 50 Hz Power (kW): 8 kW Current consumption: 15.4 A Belt: Stainless steel mesh belt, width 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional equipment included: Forming plates: 2 pallets with a set of plates for various product shapes. Service stand: Made of stainless steel, equipped with 2 additional discharge belts (width 400 mm). Dimensions: 1350 × 600 × 2100 mm. Tool trolley: Original GEA trolley for easy storage and changeover of forming parts. Dimensions: 1200 × 700 × 950 mm. The GEA MultiFormer 400 is a professional food forming machine utilizing proven plate technology. This 2021 unit features a modern design “Made in the Netherlands” that ensures maximum hygiene and production precision. The system allows for quick product changeover – from classic burgers and nuggets to custom 2D and 3D shapes. Thanks to its stainless steel mesh belt and the included discharge belt system, the machine is ready for direct integration with coating, frying, or freezing lines. The included tool trolley and complete set of forming plates make this package an extremely flexible solution for meat, poultry, and plant-based food processing plants.

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool Iodpscyamwofx Apcsig - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2025, condition: as good as new (ex-display), Single-column table-top machine max. testing force 2.5 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 2,5 kN (grade 05 from 25 - 2500 N / grade 1 from 5 - 25 N Iiodpscw Ix Ssfx Apcog - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - compression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2025, condition: as good as new (ex-display), Max. Test force 100 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - machine in working order - incl. load cell 100 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Iijdpfscxwq Rex Apceg Optional: - mechanical clamping device - hydraulic clamping tool - bending tools - compression plates - clip-on extensometer - probe arm extensometer - video extensometer - laser speckle extensometer - climate chambers - high temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, total height: 1,850 mm, total width: 1,400 mm, total length: 2,000 mm, film width: 600 mm, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Ijdpfx Apjv Dwbbecoig Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: like new (used), functionality: fully functional, warranty duration: 12 months, filling weight (min.): 5 g, filling weight (max.): 5,000 g, Introducing the brand-new DLPACK 260 Servo! Built with stainless steel and equipped with Siemens controls, this machine delivers exceptional performance for a wide range of applications, from powders and granules to food and non-food products. The first 20 machines have already been built and commissioned, achieving an output of up to 105 bags per minute. With a dosing range of 5g to 5000g and bag sizes from 60–260 mm (W) × 80–500 mm (L), it is designed to handle almost any packaging requirement. Key Features: Brand: DLPACK Model: DLPACK 260 Servo Capacity: Up to 105 bags/min Dosing range: 5g – 5000g (via separate dosing) Bag format: 60–260 × 80–500 mm Construction: Stainless steel Control system: Siemens Warranty: 12 months Delivery time: 10 weeks Optional extras: Printer, labeler, weigher, screw dosing, and more – fully customizable for your application. Suitable for pillow bags and almost any product type. Iiodex Ag Ikjpfx Apcog About DL Packaging DL Packaging specializes in modernizing and installing dosing systems, vertical form-fill-seal machines, cartoners, and end-of-line packers. Our “Second Life Packaging Solutions” are rebuilt to near-new standards and can be combined into fully automated lines – all from a single source. With over 30 years of experience, in-house dosing capabilities, comprehensive warranties, and tailored advice, our experts design the perfect machine or packaging line for your needs. Remote support, maintenance contracts, and a warehouse stocked with over 20,000 parts ensure your production keeps running smoothly. DL Packaging – your worldwide partner in retrofitted packaging solutions, based in Oosterhout and proud retrofit partner of the Rovema Group.

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Iodpezxdqzofx Apcoig Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition