Hardness testing device, hardness tester

CV Instruments THR-700 E

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm Nwjdewzmpzjpfx Af Sol min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Njdpezdf Hvefx Af Sewl Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: used, Year of construction: 2012, functionality: fully functional, The machine is in good condition and is equipped with a loader and a disc changer. Njdpfx Asx Swyfef Sswl

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Nodpfxozqt Umo Af Sswl Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2016, condition: ready for operation (used), Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000mm/3000mm, total weight: approx. 13000kg, inspection possible by arrangement. Nsdpfx Aeylbr Dsf Sewl

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Nwsdpsyia Tljfx Af Ssl Technical Specification Taper Size HSK 63

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Nwodexf Ikfopfx Af Sjl

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Njdevz Snkjpfx Af Sewl Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Nwjdpfx Afexmd S Ie Sol Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Nodpfx Afjilp Euj Sswl Misc. accessories MARCELS MASCHINEN AG