Used Screw Jack for sale (6,827)

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. Iodpfoz Ah Uxex Apcsbb For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 6x3200 SMO-3206-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 14 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Total mass: 5200.0 kg Iedpfxsgih Uto Apcsbb Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 6x2500 SMO-2506-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program Ibodpsgih Upofx Apcsb - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1979, operating hours: 216 h, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Ibsdpfxoyhcc Ao Apceb Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: good (used), 1 x Guttridge Screw Elevator Height is 3m. Screw is 3.3m. *The is no motor on this for the screw elevator but the horizontal screw is complete* Iodpfx Apez Ap Ndocebb

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Iedpfszt Sriox Apcjbb Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: good (used), functionality: fully functional, Year of construction: 2004, operating hours: 6,700 h, load capacity: 8,000 kg, fuel type: gas, motor manufacturer: Perkins, DGUV certified until: 07/2026, empty load weight: 12,500 kg, total height: 3,800 mm, Linde H80T in good condition for sale as shown in the photos. Only 6700 operating hours, verifiable! This is one of the last models without extensive electronics, etc. (Perkins engine). - Load capacity: 8,000 kg - Own weight: 12,540 kg Ibjdjw Eyb Sspfx Apcsb - 3rd and 4th hydraulic circuits up to the fork carriage available - Valid UVV inspection sticker - Year of manufacture: 2004 - Overall height approx. 380 cm (Mast can be tilted forward for transport or fully dismantled as agreed) Please feel free to contact us anytime with any questions.

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 Ijdpfx Aey A Nwkjpcjbb 90 kW 7.5 bar 16.87 m3/min Year of manufacture: 2015 Operating hours: 65,031

Condition: used, Year of construction: 1982, type of closures: 28 x 15 working direction: rotating turret Ibjdpfjz Aixrjx Apceb

Condition: excellent (used), Year of construction: 2007, operating hours: 9,667 h, PROD. KAESER TYPE ASD57 T S/N 1187 YEAR 2007 POWER (kW) 30 CAPACITY (m3/min) 4.65 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 9667/21953 Isdpfxjztqvys Apcebb VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER yes, R134a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, CREEMERS RCB7.5 screw compressor, model 10, machine serviced. Technical specifications: capacity: 1200 L/min; engine power: 7.5 kW; pressure: 10 bar; operating hours: 10943 h!!! year: 2004; compressor in fully working condition. Ibedpfx Aszp Hriopcob net price: 8200 PLN gross price: 10086 PLN Video available below.

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw Ibedpfozhx Hvex Apcjb -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 14091807829900901, overall weight: 350 kg, total length: 800 mm, total width: 700 mm, total height: 1,200 mm, power: 22 kW (29.91 HP), pressure (min.): 7.5 bar, pressure (max.): 13 bar, Equipment: type plate available, Screw compressor, 22 kW Operating pressure: 7.5 - 13 bar 400 V / 3-phase / 50 Hz Made in Germany / CE Isdpfx Apezqr Edscebb

Condition: good (used), Ktron Soder Screw feeder Stainless screw feeder, batch feeder, 150Kg stainless hopper, twin screws, 35mm screw diameter, 3Ph Isdpfsz Ak Sgjx Apcobb

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder -Electric chuck guard -Foot brake -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop -Operating tool Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted. Ibsdszvpxxopfx Apcob

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, total length: 10,020 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, Weights ? Permissible total weight: 36,000 kg ? Permissible axle load: 24,000 kg (technically 27,000 kg) ? Fifth wheel load: 12,000 kg ? Tare weight: approx. 8,560 kg Dimensions ? Fifth wheel height: approx. 1,150 mm ? Overall width: approx. 2,550 mm ? Overall length: approx. 10,000 mm Isdjzthhgepfx Apcebb ? Roller height, unit: approx. 1,350 mm General ? Our vehicles are designed and manufactured to meet the highest standards in the transport, waste disposal/landfill and agricultural sectors. Our many years of experience guarantee a robust vehicle with a long service life. Steel frame ? Welded steel frame structure with longitudinal and transverse beams, using high- quality steels. ? With mounting bracket for installation of the roll-off tipper. ? 2" kingpin bolted and interchangeable, 2 positions. ? Fifth wheel with platform (see below). Axles/Suspension ? Low-maintenance branded axles 3 x 9,000 kg, disc brakes. ? Axle manufacturer: SAF. ? Incl. air suspension with lifting and lowering device. ? A-axle as a lift axle with 2-side lift. ? Axle distance 1,320 mm / 1,320 mm. Braking system ? Load-dependent, two-circuit pneumatic braking system according to EC Directive 71/320 (WABCO). ? Automatic load-dependent brake force regulator. ? EBS electronic brake system. ? SmartBoard incl. InfoCenter. ? Parking brake in spring accumulator design. ? Automatic lowering when hydraulic system is activated. ? Power supply via interlockable coupling connections at the front (supply cable not included). Tires ? 6 tires, size 385/65 R 22.5, branded according to manufacturer's choice, mounted on Alcoa Durabright aluminum rims. Outriggers ? 2 x 10 t geared outrigger jacks with single-side operation, 2 speeds. Superstructure Roll-off tipper in sliding arm design ? Type: S25-6400 ? Hook height: 1,570 mm, according to DIN 30722 ? Roller height: approx. 1,350 mm ? For container length inside: min. 4,750 mm to 7,000 mm ? Lifting/tipping force: 25,000 kg ? Tipping angle: 51 degrees ? Data and dimensions: according to DIN 30722 ? Working pressure: max. 350 bar Additional equipment ? Hydraulic internal locking. ? ControllerPlus control system incl. control block cover, incl. display. ? Wireless remote control incl. holder and charging station, quick diagnostics display. ? Softstop, gentle lowering. ? Softslide, smooth movement of the container. ? Manual control as emergency operation. ? Automatic lowering of the air suspension when the hydraulic system is activated (lowering of the air suspension on axle body, C-axle). ? Mounting on chassis frame, the mounting arm is located between the longitudinal beams. Superstructure/Fifth wheel platform ? Platform design with fixed front wall and folding side aluminum gates, rear gate pluggable. ? Wooden floor made of screen-printed panels, screwed and sealed. ? Tie-down points in the outer frame for securing the load. Lighting ? 24 Volt according to StVZO (German Road Traffic Regulations) with LED rear lights, mounted as high as technically possible. ? Incl. fog light and reversing light. ? 2 position lights at the front and rear. ? 4 marker lights per side. ? Connection at the front via a 15-pole socket according to DIN ISO 1185 and DIN 3731. ? 2 extra reversing lights. ? 4 extra work lights switched via the fog light. Attachments ? 2 x wheel chocks with holders. ? 6 plastic mudguards (2 with splash guards). ? Rear underrun protection, fixed with splash guard. Painting/Surface treatment Chassis: Sandblasted and primed Chassis: Pa

Condition: used, functionality: fully functional, Dosing hopper with inclined base, equipped with an extraction screw conveyor. Capacity: 3 m3 Dimensions: 2800x1400x2300mm Driven by a high-efficiency ALMO IE3 geared motor (model MH3-100L4, 230/400V, 1445 rpm, manufactured 07/2017). Equipped with plexiglass inspection windows. Mounted on a mobile frame with wheels. In good overall condition. Ibsdpfx Aszxz Iqopcsb Made of painted steel.

Condition: like new (used), Year of construction: 1998, operating hours: 13,929 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.254 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: air, screw compressor TAMROTOR 110kW 7,5 bar 20,9m3/min Manufacturer: Garden Denver TAMROTOR Type: M110/7.5 EANA Air delivery: 20.9m3/min Year of manufacture: 1998 operating pressure: 7.5 bar Engine power: 110 kW Revolution: 3453/min Network: 50 Hz 400 V Maximum operating temperature: 115°C Weight: approx. 2400 kg Iedpfx Ajty Nkwjpcobb

Condition: excellent (used), Year of construction: 2016, operating hours: 3,611 h, PROD. ATLAS COPCO TYPE GA90 S/N API624230 YEAR 2016 POWER (kW) 90 CAPACITY (m3/min) 16.48 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 3611 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Iodpfx Apozxxnbecjbb CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Maintenance carried out by Kaeser Ibjdpfx Aoym Axzepcsb

Condition: used, Year of construction: 2008, operating hours: 22,795 h, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Manufacturer: Kaeser Type: ASD 32 Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Includes complete documentation + CE certificate Ijdpew Trghefx Apcobb Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. All information subject to change. Prior sale reserved.

Condition: used, machine/vehicle number: PMAM010000, Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: Ibodszz Rtzopfx Apcob 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm Iodpszwggvjfx Apcsbb -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,427 h, functionality: fully functional, overall weight: 300 kg, total length: 980 mm, total width: 620 mm, total height: 1,480 mm, pressure (max.): 11 bar, noise level: 69 dB, Equipment: refrigerant dryer, type plate available, Kaeser SXC 8 5.5 kW screw compressor with dryer and tank For sale: Kaeser SXC 8 screw compressor, one of the most reputable brands in the industrial market. The equipment comes from our own industrial facility. It is in working order and has very few operating hours for this type of machinery. Iedpfx Aszmqbpopcsbb Technical specifications: • Manufacturer: Kaeser Kompressoren • Model: SXC 8 • Year: 2014 • Motor power: 5.5 kW • Maximum pressure: 11 bar • Operating hours: 5,427 h • Integrated vertical tank • Integrated refrigeration dryer • Sigma Control Basic electronic control • Refrigerant R134a Advantages: • Very low operating hours. • Highly reliable industrial compressor. • Dry air thanks to the integrated dryer. • Very easy installation, as the tank and dryer are incorporated into a single unit. • Ideal for workshops, machining, carpentry, laser cutting, printing, the food industry, and any process that requires high-quality compressed air. The equipment is available for inspection. A video of the equipment in operation can be provided. "Only 5,427 operating hours. Complete Kaeser SXC 8 compressor with integrated refrigeration dryer and tank. Equipment ready for operation."

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Ijdpfx Aozzrmpspcobb Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620