Used Scm Scheduler for sale (1,514)

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45° Height and swivel adjustment via handwheel Dial indicators in the handwheel Motor power 7.0 kW 4 speeds 30mm milling spindle Aluminum clamping jaws Milling fence with crank adjustment Gedpoipv A Tjfx Akyjkc Long cast iron tables Safety rulers

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood Gkodpfoixxwmox Akysc second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] Godoizxf Hopfx Akyskc - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner!

Condition: excellent (used), Multisaw scm m3 - track width 300 mm - cutting height 120 mm - engine power 37 kW - weight 1800 kg - year 2003 - max. element width 100 cm - min. element length 40 cm - smooth adjustment of feed speed - three rows of anti-kickback pawls - spindle diameter 50 mm - sleeve diameter 70 mm - sleeve equipped with spacers and 5 saw blades 350 mm - blade diameter from 200 to 350 mm - automatic central lubrication Gedpfx Asi Ewnajkyskc - four upper pressure rollers – a set of keys Machine and tape in very nice condition.

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 Gkedscrnm Nepfx Akyec cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: Gkjdpsd E Ixzefx Akysc • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: Gkjdpfx Aed Akygskyoc - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Number of axles: 3 Gsdpfx Aotr A Evjkyekc

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes Gkjdpfx Akjxg El Aoyoc In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Gksdpfoxqggcsx Akyoc Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Gkjdpfx Aowhi Slekyoc Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, AD planer Minimax 310, good condition, 2.2 kW, 200 kg. Price changes reserved, subject to errors, printing and typographical mistakes. Gkedpfx Aox H Udqskyec

Condition: used, Cutter SCM Gkjdpfx Akouzivpjysc

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Gedpsy S U Duefx Akyskc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 3050 mm Working area Y: 1250 mm Working area Z: 180 mm 9.5 kW electrospindle Gkodpfjy Tb Ezex Akyjc Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Blade for grooving in the X direction 4-position tool changer Rear 10-position tool changer Worktable with 6 rails, 6 TVN tables with suction cups 90 m³/h vacuum pump Software: Xilog Maestro Laser positioning device Control panel Approximate weight: 2750 kg No additional components included!

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm Gedpfx Aksyxph Ueyskc – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm – scorer blade diameter: 120 mm – main motor: 5.5 kW – scorer motor: 0.75 kW – brake – main saw spindle diameter: 30 mm – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 118 mm, cutting width (max.): 1,270 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,550 mm, total width: 2,200 mm, total height: 1,600 mm, overall weight: 630 kg, Equipment: CE marking, documentation/manual, saw blade guard, – Italian manufacture – Year of production: 2006 – Operating manual and CE certificate TECHNICAL SPECIFICATIONS: – Carriage length: 3200 mm – Cutting width on the right side: 1270 mm – Blade diameter: min. 250 mm, max. 350 mm – Scorer blade diameter: 120 mm – Main motor: 5.5 kW Gjdpfx Akjy Ax Nioyjkc – Scorer motor: 0.55 kW – Brake – Main blade spindle diameter: 30 mm – Scorer spindle diameter: 20 mm – Cutting height adjustment – Cutting angle adjustment: 0° - 45° – Max. cutting height at 90° (350 mm blade): ~118 mm – Max. cutting height at 45° (350 mm blade): ~84 mm – Two ratchets – Moving guard – Carriage dimensions (length/width): 3200 x 315 mm – Extraction port diameter: 80 and 120 mm – Overall dimensions (L/W/H): 355 / 220 / 170 cm – Weight: ~630 kg

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: Motor: 4 kW Godozk Nw Rspfx Akyskc Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 1,000 rpm. Spindle height adjustment via handwheel Dimensions: 1200 x 80 x 1350 mm Wooden clamping jaws Includes Holz Her 3-roller feed unit and stand with chassis Availability: at short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction Godpfx Ajyu Upuokyokc For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: used, Year of construction: 2006, Tree 50mm Long tables Front-mounted table extension Gjdjzr R Dnepfx Akyskc Trainer 3 rollers 380V

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Cutting depth: 4300 mm 7.5 kW main blade unit Scoring blade unit 1 fixed front table with air cushion 3 mobile front tables with air cushion Pushing carriage with approx. 7 clamps WinCut software Foot pedal for cycle start and stop Gkjdpfx Aoznz Uiskyoc Safety guards Weight approx. 3277 kg. Available starting September 2026.

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding Gkjdpfx Akjzinpcsyoc - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: used, Year of construction: 1996, Mortise spindle Gkjdpfx Ajzlcx Rokysc Tree 50mm Tool for profiling up to 350mm Sold as is, without cleaning or inspection.

Condition: like new (used), functionality: fully functional, SCM SERGIANE STV 12-13-250 edge banding press Gkodpfxezlhnwj Akyjc Maximum pressing length: 12,000 mm Maximum pressing width: 250 mm Maximum pressing height: 1,300 mm Number of vertical clamps: 56 Number of front clamps: 12 Pressing force: 5–15 kg/cm² CE certified DTR documentation included Overall length: 16 m Year of manufacture: 2019

Condition: like new (used), spindle diameter 35 mm Gsdpfx Akszx U Nujyokc 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit