Used Scm M2 3/26 for sale (67,085)

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Bedpfx Adoxw N N Heredd Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Bsdpfx Adecnxa Sorodd Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Bdsdpjff Efaofx Adred Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° Bdedpfx Aocnxa Nedred ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Bodsy Ehiwepfx Adrjdd Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Rapid belt tensioning via lever Bdedpfx Adeff Hdbsred Upper belt support with graphite coating 250 mm diameter weighted belt pulleys ensure optimal drive. With electric height adjustment With dust extraction and noise reduction features With noise reduction certificate With two speeds Adapts to surfaces through a pivoting sanding shoe For processing beveled surfaces Standard with right and left rotation The rapid belt tensioning enables quick and easy changing of the sanding belts. Delivered partially assembled Dimensions and weights Length approx. 4540 mm Width/Depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Dust extraction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm Working width max. on table 900 mm Electrical data Power of height adjustment motor 0.37 kW Power of dust extraction motor 0.75 kW Power of drive motor 3.3 / 4.5 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Sanding shoe length 360 mm Sanding shoe width 150 mm Workpiece Height max. 590 mm Height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table: Processing of the workpiece with an overhang to the right over the work table is possible.

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Bodsd Hx Hmopfx Adrodd Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Bsdpoxw N Sbofx Adrodd Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm - Top: Bdsdpfx Adszbavgerjd - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Bsdpsza Elwofx Adrodd Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. Bodpfxjiiyppo Adredd torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Bdjdpfxoyzadre Adrod

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 Bdodpfx Adorx S Ipsrsd WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground Bdedpfx Ajzcmcvsdred * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, functionality: fully functional, SCM T130 Undercut Spindle Moulder Spindle diameter: 35mm Total spindle length: 160mm Main motor power: 5.5kW Bsdpfozakgmjx Adrjdd Spindle speed, belt-driven, adjustable: 3000/4500/6000/7000/10000 rpm Spindle rotation: both left and right Electric spindle lifting mechanism

Condition: used, mileage: 334,000 km, power: 250 kW (339.91 HP), first registration: 10/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Manufacturer MAN Model TGM 26.340 6x2?4 Euro 6 Chereau / Carrier 9,8 m Bsdpfxoynq Due Adrsdd Year 2017 Condition Good Serial Number WMAN44ZZ1JY365991 Ref. nr. 1568080 Reg. date: 25-10-2017 Last seen: Hk: 340 Km: 334000 Gearbox: automatic Eurotype: 6 Diesel tank: 1 Tank liter: 350 L Mirror camera: ? Rear view camera: ? Air conditioning: ? Navigation: ? Radio: ? Disc brake: ? Engine brake: ? Tire Size: 315/70R22.5 Cover% left 50% 30% 50% Front suspension: Air Suspension rear: Air Toolbox: ? Total weight: 26000 Kg Net weight: 11900 Kg Load capacity 14100 Kg Inside length: 9853 mm Internal width: 2508 mm Interior height: 2653 mm Lift Brand: Zepro Lift capacity: 2500 Kg Refrigerator brand: Carrier Refrigerator year: 2017 Engine hours 3192

Condition: used, mileage: 147,000 km, power: 235 kW (319.51 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Certified Orten SafeServer structure with 4-row rear load securing AHK MAUL AHK ball LBW 2,000 KG FULL AIR SUSPENSION Rear view camera Bdedpfxjyura De Adrsd Automatic AIR CONDITIONING Differential lock Lane keeping assistant Brake assistant Roof polisher Sun visor PAYLOAD: 16,650 KG !!!!! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS TEST / speedometer test / installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD TOLLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,195 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our company! NEW MAN TGM 26.320 with certified Orten KETTLINER body and 4-row rear load securing Orten KETTLINER Body Bjdpfox Iy Rfsx Adrsdd * Certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing tracks * Large foldable side steps * Liftable trailing axle with steering * Automatic transmission * Air conditioning * Cruise control * Heated seat * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind spot, reversing and crosswind assistant * Euro 6, green emissions sticker GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING On request, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING OFFER. SERVICE TÜV main inspection / UVV tail lift inspection / LGS test / tachograph check / installation of OBU (on-board unit) and service through our AUTHORIZED WORKSHOP on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale according to our terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 9,000 mm, loading space width: 2,470 mm, loading space height: 2,195 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are delighted that our offer has captured your interest and would like to assure you that you can purchase a high-quality and affordable vehicle with a verifiable service history from our company! NEW MAN TGM 26.320 with certified Orten SafeServer body and four-row rear load securing system * Orten SafeServer body * Cargo area: 9,000 x 2,480 x 2,195 mm * Certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draught beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * Four rows of load securing rails Bodpfx Aewl Ttzodrsdd * Large fold-out side steps * Liftable trailing steering axle * Automatic transmission * Air conditioning * Cruise control * Heated seats * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind spot, reversing and crosswind assist systems * Euro 6, green emissions badge GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s certificate for export. FINANCING On request, we are happy to provide you with a leasing, hire-purchase or financing offer. SERVICE TÜV roadworthiness inspection / UVV LBW / LGS testing / tachograph testing / installation of OBU devices and service through our AUTHORISED SERVICE CENTRE on-site. TOLL / ROAD CHARGES Toll services can be booked on-site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale subject to our general terms and conditions. Information provided online is for descriptive purposes only and does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 8,040 mm, loading space width: 2,470 mm, loading space height: 2,092 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are delighted that our offer has attracted your interest and assure you in advance that you will be able to purchase a high-quality and affordable vehicle with a fully traceable service history from our company! NEW MAN TGM 26.320 with certified Orten KETTLINER body and 4-row rear load securing system * Certified to VDI 2700 ff and DIN EN 12642 Code XL standards * Beverage certificate * Draft beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing rails * Large foldable side steps * Liftable trailing steering axle * Automatic transmission * Air conditioning * Cruise control * Heated seats * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind-spot, reversing, and crosswind assist systems * Euro 6, green environmental badge GERMAN VEHICLE REGISTRATION / EXPORT DOCUMENTS We organize your registration and export documents, including EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to provide you with a LEASING, HIRE PURCHASE, or FINANCING OFFER. SERVICE TÜV roadworthiness / LBW accident prevention / LGS inspection / Tachograph inspection / OBU device installation and service performed by our AUTHORISED SERVICE CENTRE on site. Bdodpfx Adsyhup Isred TOLL / ROAD CHARGES Toll payment can be arranged on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale in accordance with our general terms and conditions. The online information is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22, 54516 WITTLICH-Wengerohr.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,195 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our company! NEW MAN TGM 26.320 with certified Orten KETTLINER body and 4-row rear load securing Orten KETTLINER Body Bdjdpfx Adex Iy N Uersd * Certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing tracks * Large foldable side steps * Liftable trailing axle with steering * Automatic transmission * Air conditioning * Cruise control * Heated seat * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind spot, reversing and crosswind assistant * Euro 6, green emissions sticker GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING On request, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING OFFER. SERVICE TÜV main inspection / UVV tail lift inspection / LGS test / tachograph check / installation of OBU (on-board unit) and service through our AUTHORIZED WORKSHOP on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale according to our terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 195,000 km, power: 250 kW (339.91 HP), first registration: 05/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 9,030 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Certified Orten SafeServer structure with 4-row rear load securing AHK MAUL AHK ball LBW 2,000 KG FULL AIR SUSPENSION Rear view camera Automatic AIR CONDITIONING Differential lock Lane keeping assistant Brake assistant Roof polisher Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-TEST / Speedometer test / Installation of OBU device and service by our BRAND WORKSHOP on site Bdodjv Nfacepfx Adred TOLL / ROAD TOLLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 135,000 km, power: 250 kW (339.91 HP), first registration: 02/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Certified Orten SafeServer structure with 4-row rear load securing AHK MAUL AHK ball LBW 2,000 KG FULL AIR SUSPENSION Rear view camera Automatic AIR CONDITIONING Differential lock Lane keeping assistant Brake assistant Roof polisher Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-TEST / Speedometer test / Installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD TOLLS Bodetvt R Depfx Adrodd TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 8,040 mm, loading space width: 2,470 mm, loading space height: 2,092 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our company! NEW MAN TGM 26.320 with certified Orten KETTLINER body and 4-row rear load securing Orten KETTLINER Body * Certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing tracks * Large foldable side steps * Liftable trailing axle with steering * Automatic transmission * Air conditioning * Cruise control * Heated seat * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind spot, reversing and crosswind assistant * Euro 6, green emissions sticker GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING Bjdpoxpqbzsfx Adrsdd On request, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING OFFER. SERVICE TÜV main inspection / UVV tail lift inspection / LGS test / tachograph check / installation of OBU (on-board unit) and service through our AUTHORIZED WORKSHOP on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale according to our terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 195,000 km, power: 250 kW (339.91 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 9,030 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Certified Orten SafeServer structure with 4-row rear load securing AHK MAUL AHK ball LBW 2,000 KG FULL AIR SUSPENSION Rear view camera Automatic AIR CONDITIONING Differential lock Lane keeping assistant Brake assistant Roof polisher Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-TEST / Speedometer test / Installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD TOLLS Bedpsv Nurnsfx Adrsdd TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.