Used Scheer Db 5 Dowel Hole Drill for sale (64,593)

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Dcedpfsv Hm Nmjx Ailen (We will only answer inquiries if you provide your address + telephone number!)

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Dcodpfx Aijw Ekfujlsn Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: used, machine/vehicle number: 008629, Max. panel length: 1300 mm No of injectors: 1 Positioning of Units by NC: yes Dcsdpfoz A Tnzjx Ailen

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles: 1 Full-bore diameter: 5-40 mm Drilling depth: 1,000 mm Djdpfxod S Ualo Ailocn

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Djdpfxozzxk Uj Ailecn Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Djdpexzp Rljfx Ailscn Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC Dcodpfx Ajdx R Dfsiljn • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: new, Year of construction: 2026, Drilling and dowel inserting machine for simultaneous drilling, gluing and dowel inserting in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Universal drilling and dowel inserting machine • Simplest operation • Closed gluing system Dcjdpedx Aw Nofx Ailjn • Suitable for panel and solid wood processing • Optional, additional vertical drilling unit • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. Dcodpfedx Axfex Ailjn The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: new, Year of construction: 2026, Multi-spindle thrufeed bore and dowel insertion machine in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Djdpfxedx Axks Ailjcn Short introduction: • Double sided boring and dowel inserter with a workpiece return transport system • Small footprint requirement for a multi-spindle thrufeed dowel insertion machine • Optional, additional vertical drilling units • Closed gluing system • Double sided drill glue dowel machine for high capacity

Condition: excellent (used), 25 vertical drills Dcjdpfoy S Awcjx Ailjn 25 horizontal drills 2.2 kW upper motor 2.2 kW lower motor 100 cm ground clearance

Condition: used, Technical data: - Shank: 8 mm - Diameter: Mainly 5.8 & 4.5 mm - Quantity: 30 pieces - Material: HSS - Condition: As new Dsdszrya Espfx Ailscn

Condition: new, Year of construction: 2026, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, total height: 2,280 mm, total length: 1,445 mm, total width: 19,975 mm, overall weight: 2,600 kg, Technical Data: Travel Paths: X: 600mm Y: 500mm Z: 755mm W: 500mm W-Type: Servo Motor Dimensions (W x D x H): 1975 x 1445 x 2280 mm (max. 2785 mm) Required Space (W x D x H): 2100 x 1600 x 2900 mm Usable Electrode Diameter: ø 0.1 ~ ø 3.0mm (up to ø 6.0mm optional) Usable Electrode Length: 800 mm Machine Weight: Dcodpey R Npvefx Ailsn 2600 kg Max. Workpiece Weight: 1000 kg Power Supply: 3ø 380V 50~60Hz (adjustable) Max. Permissible Current: 30A Rated Load Capacity: 5 KVA Required Pneumatic Pressure: 5 bar Ion Exchange System with Sensor

Condition: new, Year of construction: 2026, Precise and accurate multi boring machine for casegoods, furniture fittings, line drilling and framework in SYSTEM 32 mm. The DB is a semi automatic boring machine with 21, 27 or 35 precision drilling spindles. Short introduction: • Universal drilling machine for panel and solid wood construction • Holes in the SYSTEM 32 mm • Massive precision drilling unit from GANNOMAT • Easy settings via mechanical digital counters for side and front stops and for drilling height position • Tool-less quick-change system for stopping ruler • Dowel holes, row of holes as well as line drilling, all kind of furniture connectors, handle and through holes, hinges, 3- 5- 7-hole groups, boreholes for drawer slides and guides, holes for door frames and table legs, etc. Dsdpfjdxz Nkox Ailjcn

Condition: excellent (used), Year of construction: 2018, Marelec M3/6P-6025-DB Compact Grader with Batching Compact graders incorporate infeed, weighing and grading on one belt and one frame. This MARELEC M3/6 compact grader is an easy to use, simple and robust solution. All of this with the same precision as the classic graders. MARELEC sets the new standard for smaller versatile grading systems using pull arms with six stations, combined left and right. This Compact Grader is equipped with the option to batch. Key benefits High accuracy High weighing and grading speed Robust and compact construction User-friendly Selection keyboard MARELEC Z2 Machine is fully checked by Marelec. Manufacturer: Marelec Model: M3 / 6P-6025-DB Year: 2018 Dcodpfx Aiezddufelen Belt speed: 1,5m/sec. Weighing range: 20 - 1.500 gram Resolution: 1 gram Max. speed: 150 pieces/minute (depending on product) Max. product dimensions: 240 (width) x 400 (length) mm Belt width: 250 mm Gates: 6 Machine dimensions LxWxH: 3.500x1.050x1.100 mm Machine weight: 300 kg.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Dsdpsxpvbtofx Ailecn Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: used, Used machine Drilling unit with 21 spindles Dodpfxsw I Um Hs Ailocn Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm Dodpfx Asf Hmn Aeilocn travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 5x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32/58 mm -Dimensions: 250/90/H100 mm Djdpfx Asb A R Iteilecn -Weight: 6 kg

Condition: excellent (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Quantity: 3x Sassex/WMW drill chucks Dedpfjc Iqrgsx Ailjcn -Recording: MK6 -Total length: 600 mm -Pin holder: Ø 12 mm -Pen spacing: 77 mm -2x Sassex/WMW drill bit holders -Recording: MK6 -Total length: 620 mm -Pin holder: Ø 16 mm -Pen spacing: 96 mm Price: for all 5 pieces -Weight: 56 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 5x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Drill bit spacing: 48 mm -Number: 2 drill heads available Dcodob A R Rnepfx Ailon -Price: per piece -Dimensions: 185/80/H80 mm -Weight: 6 kg

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm Dcsdjx Afn Nepfx Ailsn bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Dsdpfx Ajzrkycsilocn Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, total length: 3,200 mm, total width: 1,000 mm, overall weight: 12,000 kg, plate diameter: 5,000 mm, Welding positioner ESAB - DB-150 MACH-ID 9796 Make: ESAB Dodpfx Aiezw Hh Hjljcn Type: DB-150 Year: 2001 1 x Driven Master unit 150 ton 3 x Slave Idler unit 150 ton Vessel diameter 1000 - 5000 mm Wheel diameter: Wheel width: Rotation speed 10 - 1000 mm/Min Load capacity per section:150T Vessel range Minimum: 1000 Vessel range Maximum: 5000Ø No of wheels per section:4 Length: 3200mm Width: 1000mm Height: 2100mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Dsdpfx Aisd Ih Hqeljcn Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)