Used Sandvik Coromant Vdi 30 for sale (25,429)

Condition: used, Year of construction: 2014, fuel type: electric, Mast: articulated arm Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Lodozzlwzepfx Af Sort

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,360 h, load capacity: 3,000 kg, lifting height: 5,380 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 250/60 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,491 kg, total height: 2,460 mm, total length: 2,500 mm, total width: 1,350 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 5.380 mm Closed height: 2.460 mm Free lift: 1.800 mm Mast: Triplex (3F538) Fork length: 1.200 mm Fork carriage: FEM 3A Drive: Elektro 80V Battery: 80V 620Ah v. 2024 Charger: Dreiphasig 80V 100A not tested Tyres: Superelastik SE 250/60 - 12 (40%) / 18 x 7 - 8 (10%) Service weight: 5.491 kg Length: 2.500 mm Width: 1.350 mm Year of manufacture: 2015 Operating hours: 6.360 h Condition: working condition Lrjdpfez Aqhzjx Af Sjt EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309278 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow Oil Cooler D20V D30V 2 Flow Oil Coolers - Coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulating coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr Flow Oil Cooler Type D 20 V, Lredeg U H E Sopfx Af Sot Year of manufacture 1998, serial number 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow Oil Cooler D 30 V Wöhr Flow Oil Cooler Type D 30 V, year of manufacture 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Price negotiable Our target price per unit is €1,950 net, ex works, plus packaging costs. All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Union.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,776 h, load capacity: 3,000 kg, lifting height: 4,590 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,175 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, tire condition: 90 %, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 620Ah Battery manufacturer: 96% remaining capacity Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, Lsdpfx Aozhp Dlsf Ssrt 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, rotating beacon, LED.

Condition: used, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN Lrodpfxjycfvno Af Sot - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2002, condition: used, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm Lrsdpfxex Url Us Af Set - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: used, Year of construction: 2004, Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  - Capacity: Up to 26,000 bottles per hour - Working direction: anticlockwise - Formats: Lodpfxowhwwvs Af Sort - 330 ml Longneck glass bottles - 330 ml Steinie glass bottles - 330 ml Swing-top glass bottles - 500 ml NRW glass bottles - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - With a Siemens S7 control - New HMI touch panel in 2019

Condition: as good as new (ex-display), Industrial Heat Exchanger, Gas Cooler, Air Conditioning Cooler, Güntner, Used Machine Lrodpfxsy Uda De Af Sjt Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 035.1/13-30-0007072P Overall dimensions: Width: 2450 mm Depth: 600 mm Height: 760 mm Year of manufacture: 2016 Fan data: Fan type: VT03149U Speed: 2344 / 910 min⁻¹ Current consumption: - / 0.35 A Technical specifications: Volume: 8.9 liters Maximum permissible pressure: 32 bar / 0 bar 0 / -1 bar Permissible temperature range: -50 °C / +100 °C -5 °C / +40 °C Test pressure: 35.2 bar Fluid group: 2 / gaseous state

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Lrodpfx Afjzqtb Tj Set

Year of construction: 2008, condition: excellent (used), Technical Specifications Manufacturer: METRIS/Coord3 Type: KRONOS 30-50-13 Year of Manufacture: 2008 Measuring Plate Width: 2225 mm Hole Diameter: 65 mm Height (top edge of plate): 75 cm Plate Height: 50 cm Height (floor to plate): 25 cm The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning are possible! Lrjdpeiy Rz Ssfx Af Sst We would be happy to prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in technical data, information and prices, as well as prior sale!)

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Ledpfx Asi Amnpsf Ssrt Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. Lsdpeh D If Hofx Af Sert - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Water pump, Grundfos, used! Type P2-140 K Lredpfjirfblsx Af Sjt Capacity 2.000 l, 90 m. 1,1 kW

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Lrjdjt Ul Exjpfx Af Sst

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Lsdpfx Asn R Dihof Ssrt Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Lodpfx Afsbql S Hj Sjrt Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, maximum load weight: 37,805 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 08/2014, total length: 9,510 mm, total width: 2,550 mm, Year of construction: 2014, Additional information: * Type | First axle: Bridgestone R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 60% * Tire tread depth inner right | First axle: 60% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 60% * Tire tread depth inner left | Third axle: 60% * Tire tread depth inner right | Second axle: 60% * Tire tread depth inner right | Third axle: 60% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lifting axle * SemCollection * SemStars Ledpfjzxkx Esx Af Sjrt Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM (Belasting Personenauto's en Motorrijwielen - tax on passenger cars and motorcycles) and are only valid for export.

Year of construction: 2005, condition: excellent (used), Description New blades and counterblades with suction HS-40/SL-SP Lrodpfx Aezwwdxef Sst Specifications Manufacturer TRIA Model BM 50-30 Year 2005 Condition Used Stock Number AI2182

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. Lrodpfxszxbnqj Af Sot DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Ljdpfozxh E Aox Af Sjrt Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Condition: used, Year of construction: 1994, functionality: unexamined, Serial No.: 30194.117.0 Roll bar Ljdpszvyq Sjfx Af Sjrt including wiring harness including robot hand-held control unit including control software and logbook

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 3033647, load capacity: 3,000 kg, TREPEL - 2 scissor lift tables, type CL 30/16 Serial no. 3033647, year of manufacture 1975 Load capacity 3000 kg Each table is equipped with transport rollers and additional transport rollers are included (loose). Lrsdozx E Nfepfx Af Sjt

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm Lredpodx R Tfefx Af Set - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: like new (used), functionality: fully functional, number of rollers: 4, roller (bottom) diameter: 660 mm, roller (top) diameter: 660 mm, side roll diameter: 525 mm, working width: 3,050 mm, sheet thickness (max.): 60 mm, overall weight: 113,000 kg, total length: 6,500 mm, total width: 5,200 mm, total height: 4,250 mm, Equipment: documentation/manual, HYDRAULICS Useful length mm 3050 Thickness mm 60 Upper roller diameter mm 660 Lower roller diameter mm 660 Side roller diameter mm 525 Lower roller movement mm 110 Bending roller movement mm 465 Approx. weight kg 113,000 Lrodpfx Afowrnkhe Set USED MACHINE OVERHAULED

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg Lredsxabiqjpfx Af Set range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover