Used Salvamac Legend 400 for sale (17,358)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. Cedpfx Aksy If A Hjcerb • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Crsdpsy Ifptjfx Akceb Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, all stainless steel mobile with outfeed conveyor belt width 400 mm Codpfx Aksy Ichmjcorb dimensions: (L x W x H): ± 2.390 x 800 x 2.285 mm power 13 kW weight 850 kg

Condition: good (used), Handwashing basin, washbasin, weld-in basin, weld-in swivel basin Crsdpfx Akeb Uhndscjb -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 24 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, overall weight: 26,330 kg, Used Ermak press brake type Speed - Bend Pro 400 ton x 4100MM, year 2015, 6 axes, Delem Control. Wila quick tool clamping system, 1 set of tools and multi lower die. Crjdox Sxn Rspfx Akcob

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Csdpfsy Nlurex Akcorb Price: on request contact: Mr. Ralf Schulz

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Credpfx Akoy Ia Hmecsb Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems Crjdpfxeya Dh Ds Akceb 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: good (used), mileage: 381,283 km, power: 345 kW (469.07 HP), first registration: 10/2014, fuel type: diesel, axle configuration: 10x4, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, navigation system, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Gullet - Power take-off (PTO) - PTO - Speed limiter - Sun visor = More information = Axle configuration Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 4: Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 22.295 kg Carrying capacity: 26.705 kg GVW: 49.000 kg Functional Crane: Penz 25Z9.60R, year of manufacture 2014, on rear of chassis CE mark: yes Crsdpfx Aoydbrzskcjb Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: 79-BFH-3 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Crjdpfx Akeuladkscob

Condition: used, mileage: 7,353 km, power: 330 kW (448.67 HP), first registration: 01/2026, fuel type: electric, maximum load weight: 14,245 kg, overall weight: 27,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, color: black, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: air, loading space volume: 46 m³, loading space length: 7,600 mm, loading space width: 2,450 mm, loading space height: 2,490 mm, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, tail-lift, traction control, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, it is calculated at the current daily exchange rate. The currency valid is that of the vehicle location. Predictive Powertrain Control, front axle with air suspension, front axle 8.0 t, trailing axle, 8 t, steered, unloadable, liftable, cable remote control for air suspension, air suspension, rear axle, axle load monitoring system, tire pressure monitoring system, electronic parking brake, wheelbase 4,900 mm, M cab, M cab, cab width 2.30 m, tinted windscreen with band filter, heated, comfort central locking system, roll stabilization assist, smoke detector in the cab, lower bunk, automatic climate control, driver's air-sprung seat, air conditioning, passenger air-sprung seat, air conditioning, electronic braking system with ABS and ASR, reversing warning system integrated with hazard warning lights, rain sensor, bi-xenon headlights, automatic main/dipped beam and cornering light, fog lights, LED daytime running lights, lane keeping assist, distance control assist, attention assist, traffic sign assist, blind spot assist, cruise control, comfort telephony, wireless charging, navigation system, tail lift: Dautel DL 1500S, 1,500 kg with roll-off protection. Crodpfjy Nf R Hjx Akcsb

Condition: new, 400 kN stroke length max. 285 mm working feed 9 mm/sec return speed 20 mm/sec 660x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Crodpfey H N Nhox Akcsb Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm Crodpfow Intaex Akceb --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 Csdpfx Akju A I Elecsrb - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Codpfxjy H Itrs Akcsrb -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence. Kappa 400 X swivel saw unit 45°. Saw blade diameter: 250 - 400 mm. Max. cutting height: 133 mm. Electric height adjustment. 5.5 kW motor. 3 speeds: 3500/4500/7500 rpm. X Motion control with touchscreen at eye level. Additional function: shifting cut, easy-lock quick-change system for main saw blade. Location: Nattheim. Cjdpfxsy H Hfto Akcsrb

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes Crjdpjx Nr Ryofx Akcjb • Robot interface: Euromap 67

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm Cjdpfey H Dc Nsx Akcerb mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,956 h, functionality: fully functional, machine/vehicle number: 17211, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: Siemens Sinumerik 840 D solution Line, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Max. workpiece height: 850 mm Max. pallet load: 500 kg Pallet changer: 2 pallets, automatic Change time: approx. 8 s Tool magazine: 60 tools Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D Solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Coolant supply: 80 bar Operating hours Total operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (Teamviewer) Energy-efficient system with regenerative feedback Standby mode for energy savings Direct drive NC rotary table 6-channel clamping hydraulics (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Renishaw OMP60 optical touch probe Tool breakage control Pallet sequence operation Crodpfx Asy Nbt Dokcjb Crane infeed/outfeed software Signal light for operating states Work area/machine equipment: shower nozzle, cleaning pistol, vortex nozzle, emission extraction interface Foot switch for air nozzle Documentation: fully digital (PDF)

Condition: excellent (used), Year of construction: 2013, screw diameter: 22 mm, injection pressure: 2,000 bar, injection weight: 31 g, Arburg 270C 400-70 Golden Edition Clamping force: 40 t Year of manufacture: 2013 Injection weight: 31 g Injection unit: .../70 Screw diameter: 22 mm Specific injection pressure: 2000 bar Injection volume: 34 ccm Injection weight: 31 g Clamping system: 400/... Clamping force: 40 t Platen dimensions: 446 x 446 mm Mould height: 200 mm Opening stroke: 350 mm Max. platen distance: 550 mm Ejector stroke: 125 mm Cedoy I Uzxjpfx Akcjrb General data: Control system: Selogica Equipment: 2 x pneumatic valves 2 x hydraulic cores Multilift robot 3 hot runner zones Rotameter

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Crjdpfx Aev Ipcfekcsb Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: used, mileage: 450,000 km, power: 294 kW (399.73 HP), first registration: 05/2009, tire size: 13R22.5, axle configuration: 6x4, wheelbase: 5,500 mm, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, total length: 10,060 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2009, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, trailer coupling, = Additional options and equipment = Cedpjyyh T Eofx Akcerb - CD player - Spare key - Power take-off (PTO) - Headlights - Stability control - Standard air conditioning - Sun visor - Toolbox - Xenon lights = Additional information = Tyre size: 13R22.5 Brakes: Disc brakes Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 95%; Suspension: leaf suspension 1st rear axle: Twin tyres; Tyre tread left inner: 75%; Tyre tread left outer: 50%; Tyre tread right inner: 75%; Tyre tread right outer: 50%; Suspension: air suspension 2nd rear axle: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 10%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: air suspension Unladen weight: 13,370 kg Payload: 12,630 kg Gross vehicle weight (GVW): 26,000 kg Damages: none

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Distance between tie bars V: 470 mm Crsdpfx Ajx Elqrokcjb Distance between tie bars H: 470 mm Mould height: 250mm Platen daylight: 750 mm Platens size: 650x650mm Screw diameter: 45 mm (wear resistant) Shot volume :254 (cm3) Shot weight: 232 g Type: Horizontal Drive: Hydraulic HOURS: 53860 Air blow 2 units Euromap 67 for robot 2 pumps machine Injection pressure incrased 10% (2500bar)

Condition: as good as new (ex-display), Year of construction: 2026, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Csdpfx Akegfm Efjcsrb Weight: 900 kg

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Csdpfxjtixlbe Akcjrb Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.