Used Saimp Fu-P2 for sale (3,821)

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, Dujdpfxoyz Af Ej Aayjw We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2020, For sale is a used Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. The machine is in good condition. Technical specifications: - Center height: 200 mm - Max. turning diameter: 395 mm (700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drill quill - Motor: 2 HP (230 V connection) - 2-stage brake switch - Weight, floor-standing version: 166 kg Duedpfx Aeyucw Teayow The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Sale subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machine Reference: B18OO

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear. Dujdpfotdpa Ujx Aayew

Condition: used, Year of construction: 1992, x-travel 1200 mm y-travel 300 mm z-travel 420 mm Duedpfeyt R R Ejx Aayjw Table dimensions 360 x 1600 mm Year 1992 ja ja spindle turning speed range 32-1600 U/min vertical stroke 300 mm total power requirement 7,5 kW weight of the machine ca. 3,400 t dimensions of the machine ca. ca. 2,38 x 1,79 x 1,94 m

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Djdsyyy Nrepfx Aayjuw

Condition: good (used), machine/vehicle number: 630, with a swiveling (pivoting) vertical head Table size: 300 x 1,430 mm Table travels: longitudinal (X-axis) 1,000 mm vertical (Z-axis) 520 mm transverse (Y-axis) 360 mm Dsdpfxsbq Rugo Aayjuw Installation height under the milling spindle approx. 500 mm Overhang of the milling spindle min./max. 350 mm Spindle mount: SK 40 Spindle speeds: 25 - 1,200 rpm Feed rate/rapid traverse: 12-900 mm/min Spindle drive: approx. 3 kW Total drive: 3.4 kW - 380 V - 50 Hz Weight: 2,400 kg

Condition: not inspected (used), Out of insolvency: Converter Wacker FU 1.6 Dsdpfx Aajrkzt Asyjuw 380 Volt 2x bottle connection 3-pole untested, as no suitable vibrating bottle available

Condition: new, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, table length: 1,600 mm, table width: 500 mm, Fully operational, heavy-duty FU series milling machines equipped with infinitely variable feed speed control on all 3 axes, including rapid traverse mode, and a 3-axis digital display. The FU line features a multi-universal milling head with 360-degree rotation. Electrical components supplied by the renowned Schneider Electric. ISO 50 spindle taper, table size 1600x500 mm. Equipped with a class-leading SERVO axis feed drive. Key Features: - Infinitely variable feed speed adjustment on all 3 axes, with rapid traverse in all axes - Universal milling head with patented "HURON" system, adjustable at any angle - Swiveling control panel with ergonomically arranged switches - Heavy-duty, solid cast iron construction ensuring vibration-free operation - All guideways are hardened and ground - Precision ball screws on all axes for enhanced machining accuracy - Centralized lubrication system - Automatic table feed for X, Y, Z axes, including rapid feed for all axes - Large, robust T-slotted table designed for maximum loads - 3-axis digital display ensures maximum work efficiency - Safety guards complying with the latest CE standards - Quiet operation due to ground and hardened gears in the oil-bath gearbox - State-of-the-art axis feed technology - High performance maintained even under heavy load - Precision and dynamics on par with modern CNC machines - Greatly reduced backlash for exceptional accuracy - Integral actuator characteristics, delivering a theoretically zero static error - Thanks to feedback, the servo drive can detect overload or positional errors. Upon such detection, the controller immediately halts all machine axes. Technical Specifications: - Table size (width): 1600 mm - Table size (depth): 500 mm - Spindle taper: ISO 50 - Spindle speed range: 30 – 2050 rpm - Number of spindle speeds / Infinitely variable: 27 - Travel X-axis: 1200 mm - Travel Y-axis: 700 mm - Travel Z-axis: 500 mm - Spindle to table distance: 50 – 550 mm - Spindle to column min.: 28 mm - Spindle to column max.: 728 mm - Max. table load: 1800 kg - Automatic feed X-axis: 10 – 1000 mm/min - Automatic feed Y-axis: 10 – 1000 mm/min - Automatic feed Z-axis: 5 – 500 mm/min Duodpfx Ajytffqeayow - Rapid traverse X, Y, Z: 2200 / 2200 / 1100 mm/min - T-slots (quantity, size, spacing): 5 / 18 / 80 mm - Motor power: 7.5 kW - Dimensions (width): 2200 mm - Dimensions (depth): 2285 mm - Dimensions (height): 2100 mm - Weight approx.: 4500 kg Scope of Delivery: - LED work lighting - Cooling system - Centralized lubrication - Table feed for X, Y, Z axes - Coolant tray - 3-axis digital display - Adjustable guards with modern safety features - Service tools - Servo drive - Legally required safety guards - Complete DTR technical documentation (Polish) - CE certificate - 24-month comprehensive warranty at no additional cost

Condition: used, Holz Her STREAMER 1057 FÜ + PU Dujdpfxoyg H Hij Aayew Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Dedpfx Aaoygud Ajysuw Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: excellent (used), For sale is a Drechselmeister STRATOS FU-230 wood lathe with a centre distance of approx. 700 mm. This pre-owned machine is in very good condition. Technical data: - Centre height: 230 mm - Centre distance: approx. 700 mm (extendable!) - Headstock swivels and slides - Infinitely variable speed control - Spindle thread: M33x3.5 mm - 2 main speed ranges - 1.5 kW / 2 HP motor The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related keywords: wood turning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machinery Duedpfx Aoyfd Stjaysw Reference: R-AT0IJ

Condition: excellent (used), Type: R0-M-P2 Frame size: approx. 300 x 400 mm Wear-resistant, positively controlled band guide Band tension adjustable via potentiometer Hot wedge sealing system Stable foot pedal for releasing the band 4 rollers, 2 of which are lockable Bands: Machine-grade PP strapping Mains voltage: 230 V, 50/60 Hz Power: 240 V 0.5 kW / 50 Hz 2.4 A Dusdpfx Aajv Sq R Esyew Year of manufacture: 2001/1998/1999 Quantity: 3 units Price per unit

Condition: used, This listing is for the Gilson PIPETMAN P2 0.2-2uL Colour code Red The unit is in full working condition and is ready for immediate use Dodpfxsxv Dqvo Aayjuw Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Duodsymmtcepfx Aayew Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: good (used), functionality: fully functional, Technical data (according to nameplate): • Manufacturer: Heckert Werkzeugmaschinen GmbH • Model: FU 315 • Year of manufacture: 1997 • Machine no.: 19019 • Temperature range: +5 to +35 °C • Total weight: approx. 3.1 t • Made in Germany Equipment / Features: Dedpfjymd Idox Aayouw • Universal milling head • Infinitely variable or widely graduated feeds (see diagram on the machine) • Coolant system • Electrical control cabinet (clearly arranged) • Digital display (see photos) • Heavy-duty machine construction • Very quiet operation

Condition: good (used), functionality: fully functional, Equipment & Features: • Universal milling head • Mechanical feeds • Digital position display Mitutoyo KA-200 (3 axes) • Solid cast iron construction • Classic, user-friendly controls • Electrical system and control by Schiffselektronik Rostock • Original Heckert nameplates available Technical Data (according to nameplate, excerpt): • Mains voltage: 380 V Dodoymdwlspfx Aayeuw • Frequency: 50 Hz • Rated power: approx. 2.2 kW • Feeds adjustable • Machine weight: approx. 3.2 t

Condition: good (used), Technical Data (according to nameplate): • Power type / Frequency: 3~ / 50 Hz • Rated voltage: 380 V • Control voltage: 220 V • Connected load: approx. 8 kW • Rated current of machine: approx. 19 A • Fuse protection: 50 A slow-blow Equipment / Features: • Universal milling head Dodsymdu Repfx Aayouw • Feeds in X, Y, and Z axes • Original control panel • Sturdy cross table • Coolant system • Very heavy-duty and durable construction • Ideal for steel, aluminum, and plastics

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 Dusdpfx Aasv H Erteyow total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Dusdpfx Aasyly Drjysw

Year of construction: 2016, condition: good (used), Label finishing line PRUDENTE FU 300 Year of production: 2016 Material width max: 330 mm Unwinder with tension control Hot stamping unit Silkscreen unit with UV drying unit ( manufacturer UV RAY). Flat die cutting/ embossing unit Rewinder Duedpfxoun Nyyo Aayow

Condition: used, x-travel: 1100y-travel: 300z-travel: 420weight approx.: 3400spindle rotation speed: 36 - 1.600table diamension: ca. 1600 mm x 360 Duedpfx Aormbc Uoayow

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Duedex Eilqopfx Aayew Machine in TOP CONDITION Available from stock Lieboch

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This showroom machine is in its original condition, so you receive the full warranty. Technical specifications: - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight, bench model: 166 kg Dsdpfjtpnawsx Aayouw The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Djdpfx Aaetphy Aeyeuw If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: used, functionality: unexamined, Ferwood Code: RU0007508 - Manufacturer Code: 00B2006241D - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dujdpfx Asv Egdheayew