Used Rotating And Traveling Table for sale (32,177)

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, Ijdpfjlamtbex Ahbstn with hollow shaft diameter 125 mm with chuck 320 mm or 400 mm very robust speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm length 850 mm x width 580 mm

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,7 rpm diameter rotary table 1400mm inclination up to 120 height horizontal 1300mm, tilted to center 1050mm length 2,0 m x width 1,4 m Itjdol Dq Svopfx Ahbon hand remote control with digital display and foot remote control

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. Isdpfx Ajl Dq U Uohbetn CE certified

Condition: excellent (used), 3000 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,6 rpm Clamping plate square 2200mm bore 190mm, T-slot 70mm Height tilted up to center 1600mm inclination up to 135 length 2,0 m x width 1,4 m hand remote control with digital display Itsdsncfwmjpfx Ahbjn and foot remote control

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Iodpemk T Rbofx Ahbjtn Tilting range 0 to 130 dimensions: height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Itodpocctnajfx Ahbjn Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Iodpfx Ajc Ug Tlohbstn Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: like new (used), Input Power AC220V 50/60HZ Load capacity 0°300Kg, 90° 150 KG Table diameter 500mm Table heigh 600mm Rotating speed 0,3 - 2,5 rpm Tilting angle 0-90° Tilting way Manually Totating motor power 200W Ijdpfxjdylk He Ahbetn

Year of construction: 2022, condition: as good as new (ex-display), 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400 mm Tilt up to 120° Height in horizontal position 1300 mm, tilted to the center 1050 mm Length 2.0 m x width 1.4 m Isdpfx Ahsd A Etrebetn Hand and foot remote control

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Itjdjd D D Hljpfx Ahben Very robust.

Condition: as good as new (ex-display), Very practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Max. load: 100 kg horizontally. Max. load: 50 kg vertically. Iedpfx Ao Ugnbohbjtn Rotation speed: 1 to approx. 7 RPM. Rotation direction: left and right. Table speed: manually adjustable. Table diameter: 345 mm. Table height: 415 mm. Table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power: AC 110V / 220V 50/60Hz. Optional: with chuck/quick-release chuck, surcharge of 180 €. Delivery to your door: 90 €.

Condition: new, Year of construction: 2025, load capacity: 600 kg, 600 kg load capacity Itodpfx Ajr Tr Axshbjn Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display Very robust Chuck at extra charge depending on version and size

Condition: new, Year of construction: 2024, Protec Welding Positioner, 10,000 kg load capacity Speed continuously adjustable, 0.05 - 0.5 RPM Hand-held remote control Itjdjid Szgopfx Ahbjn Foot-operated remote control, additional cost: €390 Height: 650 mm Diameter: 1600 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 2000 kg load capacity Isdehwv Rvepfx Ahbotn Rotating device, self-supporting, with brake for fixture construction, toolmaking for assembly, welding, painting, etc. with foot-operated remote control switchable left/right Machine is in technically new condition, almost unused Dimensions: Height to center of axle 850 mm More machines of this design in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Condition: used, Year of construction: 1996, Sliding carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut rule display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Itsdpfsyq Rz Sjx Ahbon Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft 6000 kg - Max.Hubhöhe 25.90 m - Maximale seitliche Reichweite 21.70 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Crab Modus - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Tier 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie / Batteriekapazität 2 x 12 V / 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift 2 / 2 Ijdpfsz Ntddex Ahbjtn - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse - Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l -Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 d

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs Isdpfx Ajz Iprtohbstn TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) Itodpjz Irx Nofx Ahbjn ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs Iedpfxjz Ir Has Ahbstn With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, Year of construction: 1997, Sled length: 2200 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 2200 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: manual / crank Saw blade tilt adjustment: manual / crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Rotational speeds: 1 Motor power: 4 kW Motor brake: yes - automatic Itedpfxsz I Iu He Ahbjn Dust extraction port: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: used, 1 unit of mobile roller table and table saw, PRIMA KE 60M Mobile Color: as shown in the pictures, according to the images and inspection Condition: used Location of the goods: Garage 1 Itodpfxez I Nd Ns Ahbon Payment method: prepayment by bank transfer Shipping: Self-collection only from the location in Bischofswiesen

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: Itodpoz Ng Nyefx Ahben 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run Itsdpez I T Rmefx Ahbsn - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft: 6000 kg Max. Reichweite: 21.70 m Aufwärtsneigewinkel: a4 12 ° Abwärtsneigewinkel: a5 110 ° Drehung des Oberwagens: 360 ° Antriebsräder (vorne / hinten): 2 / 2 Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang Typ Abstützung: Abstützung Teleskop Duplex Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig Anzahl Batterien / Batterie: 2 x 12 V 12V Batteriekapazität 120 Ah Anlaufstrom der Batterien (EN)850 A Batterietechnologie Lithium-ion Batteriekapazität 105 Ah Nennspannung der Batterie 624 V Iedpfxoz N Imye Ahbotn Maximale Spannung der Batterie 680 V Batterieenergie 65 kW/h Nennleistung des Elektromotors 107 kW Hydraulische-Motorleistung 84 kW Ladegerät Leistung / Phase / Stromtyp 11 kW / Single-phase or three-phase / AC Getriebetyp elektrisch Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 Max. Fahrgeschwindigkeit 37 km/h Zugkraft 8600 daN Kontinuierliche Zugkraft 4300 daN Parkbremse Automatische negative Parkbremse Festellbremse Ölbad Lamellenbremsen an den Vorder- und Max. Steigfähigkeit - beladen / unbeladen 36 % / 48 % Kontinuierlich überwindbare Steigung (beladen / unbeladen) 18 % / 23 % Hydraulisch Typ Hydraulikpumpe Zahnradpumpe Hydraulikfördermenge 175 l/min Hydraulikfördermenge – Hydraulikdruck 350 bar Fassungsvermögen des Hydrauliktanks 200 l Geräuschpegel im Fahrerstand (LpA) 65 dB Umgebungsgeräusch (LwA) 103 dB Schwingungsbelastung Hand/Arm < 2.50 m/s² Lenkräder (vorne / hinten) 2 / 2 Steuerungen 2 Joysticks Kabinen-Zertifizierung Kabine ROPS - FOPS Stufe 2 Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 79-12/075-98, functionality: fully functional, input voltage: 380 V, input current: 86 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: electric, table length: 2,000 mm, total length: 2,220 mm, total width: 710 mm, total height: 1,220 mm, overall weight: 450 kg, Equipment: documentation/manual, Everything on the machine is in perfect working order. The sliding table has a length of 1920 mm. It was manufactured without brakes. It is in the condition shown in the pictures and is available for testing on a pallet. Itjdpfjz N S Izjx Ahbsn