Used Rapid Akf for sale (3,589)

Condition: new, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,250 mm, total width: 2,550 mm, total height: 1,076 mm, Year of construction: 2025, Equipment: ABS, rapid+ 2-axle central axle trailer A2T-LZ53 ALPHA * Only 3,250 kg unladen weight * Air suspension * 2 single axles, manufacturer SAF, 12 t with disc brakes, including safety cables * Tires 275/70 R 22.5 on high-gloss aluminum rims * Aluminum air tank * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 2x winch cable * Paint finish: frame/joist color graphite black * Drawbar with Ø 50 mm towing eye * Lateral impact protection in accordance with ECE?R 73 * For the transport of 2 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x ExTe D7 joists + tapered uprights Bwedpfx Ajhnakrsl Rer Ex works Mildenau. Subject to change and prior sale. Further information available upon request. Specifications subject to change without notice. Illustrations may differ from the original. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 14,560 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,400 mm, total width: 2,550 mm, total height: 1,146 mm, Year of construction: 2025, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ64 ALPHA * Only 3,440 kg unladen weight * Air suspension * 2 single axles, manufacturer SAF, 12 t with disc brakes, including safety chains * Tires 275/70 R 22.5 on high-gloss aluminum rims * Air reservoir made of aluminum * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) Bwedpfx Aohnakyjl Rer * 1x grapple bracket * Paint finish: frame/bolster color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + support plate on drawbar * Lateral underrun protection according to ECE?R 73 * For the transport of 3 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * ExTe D7 bolster + tapered stakes Ex works Mildenau. Subject to change and prior sale. Further information available upon request. Specifications are subject to change without notice. Illustrations may differ from the original. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 1,075 mm, Year of construction: 2026, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ59-L ALPHA * Only 3,100 kg tare weight * Air suspension * 2 single axles, manufacturer SAF, 9 tons with disc brakes, including safety cables * Tires: 275/70 R 22.5 on high-gloss aluminum rims Bwedpfshnak Dex Al Ror * Air tank made of aluminum * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple cable * Paint: frame/bolster color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + support surface on the drawbar * Lateral impact protection according to ECE?R 73 * For the transport of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * ExTe D7 bolster, ExTe D7 EURO-C stakes Plus TÜV inspection. Ex works Mildenau. All prices plus registration and legally applicable VAT. Subject to change and prior sale. Further information upon request. Information without guarantee. Illustrations may differ from the original. DOLL lightweight construction: This DOLL 2-axle trailer represents modern vehicle construction and efficient timber transport. The trailer offers the proven DOLL quality – practical and safe. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 14,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,250 mm, total width: 2,550 mm, total height: 1,076 mm, Year of construction: 2024, Equipment: ABS, rapid+ 2-axle central axle trailer A2T-LZ53 SIERRA * Air suspension * 2 single axles, manufacturer SAF, 12 tons with drum brakes, including safety cables * Tires 275/70 R 22.5 on steel rims * Air tank made of aluminum * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 2x grapple cable * Paint finish: frame/bolster color graphite black * Drawbar with Ø 50 mm drawbar eye * Lateral impact protection according to ECE?R 73 * For the transport of 2 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x DOLL MAMMUT bolsters + stakes Ex works Mildenau. Subject to change and prior sale. Further information available on request. Information without guarantee. Illustrations may differ from the original. Contact: Niclas Lott Bwedog Spz Aopfx Al Rer Tel.:

Condition: used, mileage: 53,000 km, power: 70 kW (95.17 HP), first registration: 02/2020, fuel type: diesel, overall weight: 2,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Optional extras: Audio system: radio with CD player (MP3-capable, Bluetooth), rear parking aid, load compartment partition with window, wheel trims, height-adjustable front left seat Audio system: Radio with CD player (MP3-capable, Bluetooth) Audio/radio remote control on the steering wheel, Bluetooth hands-free system, USB connection incl. AUX-IN&#x2,connection (Plug & Music) Bwsdpfxovra S Es Al Rer Air conditioning Cabin air filter: Pollen filter Wheel trims Further equipment: Storage gallery, Airbag driver's side, Electrically adjustable and heatable exterior mirrors, Exterior temperature display, Rev counter, Eco Mode (driving mode switch), Electric brake force distribution, Belt tensioner, Rear wing doors with glazing, Body/bodywork: Box, Adjustable headrests, Plastic floor in luggage/cargo compartment, Height-adjustable steering column (steering wheel), Model update, Engine 1.5 ltr. - 70 kW BLUE dCi Diesel FAP, Wheelbase 3081 mm, Spare wheel with driving tires, Low-emission according to Euro 6d-TEMP emissions standard, Gearshift indicator, Rear disc brake, Sliding door right with window, Side impact protection, Side protection strips, Height-adjustable front seat belts, Seat cover/upholstery: Fabric, Start/stop system, Engine underguard

Condition: used, material width:304,8 mm material thickness:0,12 - 2,2 mm feed length:304,8 mm Bwjdpfscxxrxsx Al Rer clamping force of fastening pincer:850 N clamping force of moving pincer:4410 N feeding force:650 N weight of the machine ca.:0,15 t dimensions of the machine ca.:0,7 x 1,05 x 0,6 m

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Bwsdoq Awg Eepfx Al Rer

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Bedpfx Asrv A Hmol Rewr Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 2006, Cutting machine ESSEPIGI Bedpst Uk N Nsfx Al Rewr

Condition: excellent (used), total height: 1,600 mm, total width: 509 mm, total length: 835 mm, Product number: 0026462 Brand: Nissei Model: NA 3338 Rapid Combi Product category: Ice cream machines Length: 835 mm Width: 509 mm Bjdszbmfuopfx Al Rewr Height: 1600 mm Connection value (V): 400

Condition: used, Milling cutter diameter 250 mm Milling width: 305 mm Bjdpfx Aley Sh Elo Rowr Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Year of construction: 2011, condition: used, For especially high PVC or aluminum profiles Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed Weight: approx. 300 kg Bwedpfxjy Sh D Io Al Rer

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 20 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 20 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. Bsdpfx Ajy U Hdlsl Rewr (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Subject to prior sales Detailed offer on request

Condition: used, Year of construction: 1994, Profile milling cutter for profile edging (aluminum or PVC) max. disc cutter diameter 300mm with spray system with pneumatic material clamping with dust extraction port 400 Volt, 80 mm cutting depth, 100 mm spindle length Bwodpoy Uvflsfx Al Ror Profile can be adjusted for miter cuts.

Condition: used, Year of construction: 2019, Electrically heated rapid steam generator. The water level in the feed water tank is regulated by a float. A pump transports the feed water into the boiler, where the water level is regulated by an electronic control system. When a certain water level is reached, the resistance heating elements switch on automatically. The heating output can be adjusted in three stages on the housing. Additional title: electrically heated steam supply Saturated steam capacity: 82 kg/h Heating output 1-, 2- or 3-stage: 20+20+20 kW Heating area: 0,566 m2 Mox. operating pressure: 8 bar Power: 60 kW Current: 86.6 A Voltage: 400 V Frequency: 50 Hz Length: 1074 mm Width: 770 mm Height: 956 mm Weight: 340 kg Base construction: auf Füßen stehend, in Gehäuse Bedpfoxf D Igex Al Rjwr Features: electric resistance heating; feed water vessel and desludging tank in the housing

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Bsdpfoy Nd T Hjx Al Rjwr Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: used, Year of construction: 2005, total width: 950 mm, total height: 1,250 mm, Colour: Grey Weight: 600 kg Bwodpfxewnilfe Al Rjr Dimensions (LxBxH): 300 x 95 x 125 cm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 31300016 - Main motor power [kW]: 4 - Max. planing width [mm]: 500 - Infeed table length [mm]: 1680 - Outfeed table length [mm]: 1270 - Total table length [mm]: 3000 - Voltage [V]: 400 - Power [kW]: 4.0 - Transport dimensions: 3000mm x 950mm x 1250mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Bwsdpfjtt Eb Sjx Al Rjr Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: excellent (used), Type AKF 6/250 Motor 400 V / 3.0 kW Speed 4500 rpm Bwedpfx Aljuf E R Ie Rjr Cutter Ø 250 mm Cutter holder shaft Ø 40 mm Milling width 305 mm Milling depth 80 mm Suction nozzle 80 mm Weight 210 kg

Condition: used, Year of construction: 2000, spindle diameter 140 mm x-travel 6000 mm y-travel 2500 mm z-travel 800 mm w- away 700 mm rapid traverse 10 m/min spindle taper ISO 50 control Heidenhain ITNC 430 Plate area 3500x2500 mm rotary table: Rottler type DVT200/2500 30NC 2000 Table dimensions 2500x2000 mm table load 30 t table travel 700 mm 360 ° T-slot - width 28/50 mm T-slot - distance 170 mm number of T-slots 11 Radial face slide 680 mm 170 mm spindle speed: 1600 UPM The control system was converted from an iTNC 430 to a Heidenhain in 1998. 60 tool positions in the magazine 2 controlled rotary tables - 1250 mm x 1250 mm; 1600 mm x 1250 mm - pendulum machining possible - table load approx. 12.5 t SK 50 chuck Various accessories available Video: ?v=XYAtKuGQ578 The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale Bsdpfey Sui Rox Al Rjwr apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1983, spindle diameter 160 mm x-travel 9500 mm y-travel 4000 mm z-travel 1000 mm w-travel 700 mm spindle speed: 2,5-1000 U/min control Siemens 840 D power capacity 28 kW spindle taper ISO 50 dimension of the ram 340x340 mm Feed 5000 mm/min rapid traverse 5 m/min The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bwodpfxjy Suiwe Al Rsr About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm spindle stroke: 700 mm dimension of the ram: 340 x 340 mm ram stroke: 700 column travel: 1500 mm spindle taper ISO: 50 Bwodpoy Anpxjfx Al Ror bore spindle turning speed range: 3,2 - 1600 U/min table surface area: 2000 x 2500 mm max. table load: 25000 kg rapid speed: 5 / 10 m/min feed speeds: 1 - 5000 mm/min total power requirement: 100 kW weight of the machine ca.: 57 t dimensions of the machine ca.: 8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply *

Year of construction: 1995, condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Bwodpfjyzhu Esx Al Ror

Condition: excellent (used), Year of construction: 2012, I sell the throughfeed drilling machine Rilesa Rapid 1500, Year 2012. Working width up to 1500mm Configuration: RAPID 2200: 1+1 motors from sides 3 motors from top Bodpfot Rrn Esx Al Rewr Entry feeding magazine for elements. Backfeeding system of conveyors to return the elements to the operator. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Bodpfsyxw Ddox Al Rjwr Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns