Used Power Test Indicator for sale (45,442)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Gsdpoy R Npisfx An Robl Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, functionality: fully functional, Year of construction: 2022, The Matest C313N is a laboratory freeze-thaw and climatic chamber primarily used for construction material testing—specifically for studying the behavior of concrete, cement, aggregates, and other materials under various temperature and humidity conditions.Primary purposes:Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling).Standardized durability testing of construction materials (e.g., EN 1367-1).Execution of accelerated aging and climatic tests under diverse environmental conditions. Gedpfxsy R D D Ue An Rjbl Features: ✔ Dual parameter control: temperature and humidity. ✔ Temperature range: approx. -30 °C to +70 °C. ✔ Humidity range: 20–95% (±1% accuracy within the appropriate temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments. ✔ 5″ color display: real-time clock and optional data logging via PC connection. ✔ Stainless steel internal and external structure: for long service life.Applications:Freeze-thaw testing on concrete and building materials: demonstrates how materials crack or degrade due to thermal cycling.Quality control of construction materials under laboratory conditions. Environmental and climatic tests where precise control of heat and humidity is essential.

Condition: good (used), Hydraulic power unit, Used machine Gbedouzigbspfx An Rel Overall dimensions: 750 x 500 x 1210 mm Weight: 314 kg Electrical data: 400V; 7.5 kW; 14.8 A Maximum pressure: 160 bar

Condition: good (used), Manufacturer: Engel / Bosch Gsdeiy Ddfopfx An Robl Operating pressure: 280 bar Capacity: 65 l/min Overall dimensions: 1800 x 800 x 700 mm Voltage: 380 V Electric power: 15 kW

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Godpjxlp T Ijfx An Rsbl Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C Gbedpfx Ansxt Hn So Rjl 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Year of construction: 2018, machine/vehicle number: 213357, Own weight: 710 kg, Power: 20 kVA Gbsdpfoy Rvrkjx An Rol

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Gbedjy Rp R Tspfx An Rsl Condition: Used system with age and usage-related wear. Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Commercial sale – sale without warranty. Subject to changes and errors.

Condition: excellent (used), emtest / AMETEK Automotive EMC Test System incl. Laptop & Software Manufacturer: emtest / AMETEK Design: Automotive EMC / on-board network testing system Format: Mobile 19" industrial cabinet For sale is a professional test and simulation system from emtest / AMETEK, designed for industrial applications in the fields of automotive, electronics testing, on-board network simulation, and EMC/EMI test technology. The system is supplied with a laptop featuring pre-installed control and test software, making it ideal for professional laboratory, development, and test bench use. The system comprises several integrated test modules, cooling fan units, as well as various power, control, and interface components. Visibly identifiable components: Module 1: emtest AutoWave Module 2: emtest VDS 200Q Display designation: VDS 200Q100.2 Function according to display: Voltage Drop Simulator Serial number on display: SWN 001638 AutoWave display: Version 8.03.05 Out: 2 / In: 0 VDS 200Q display: DC Supply Waveforms Firmware: V2.02.00 Gbjdpfx Anjy Rlbhj Rel Generator: V2.01.01 Additional model designation (from documentation): VDS 200Q100.2-208 Connections / Interfaces: - Ethernet - IEEE 488 - USB VDS - Frame Bus In / Frame Bus Out - Analog In - AutoWave CH1 / CH2 / CH4 - 0–10 V connection - DC output / output connectors - CEE power plug - Emergency stop switch Features: - Mobile industrial/19" cabinet - Multiple integrated cooling fans - Front control and terminal panels - Rear power and interface connections - Side-mounted emergency stop switch - Industrial-grade build for laboratory, development, and test bench applications Potential application areas: - Automotive test engineering - On-board network simulation - Voltage drop simulation - Electronics and component testing - EMC/EMI laboratory - Research and development - Quality assurance - Test bench and measurement applications Technical notes: - Four-quadrant voltage drop simulator - Suitable for automotive voltage profile testing - Supports various automotive test standards, such as LV 124, LV 148, ISO 7637-2, ISO 16750, and similar standards - Output range per documentation: -20 V to +80 V - Bandwidth up to 250 kHz Condition: Used device with age- and use-related signs of wear. See pictures for cosmetic condition. Unit powers on; displays are active. A full technical function test under load has not been performed. Dimensions & weight: Exact dimensions and weight have not been established. Due to its design as a mobile industrial cabinet, assume corresponding industrial-grade weight. Exact measurements and weights can be provided upon request. Scope of delivery: - emtest / AMETEK test system in a mobile industrial cabinet - Laptop with installed control and test software - AutoWave module - VDS 200Q / VDS 200Q100.2 module - Built-in fan and connection units - Scope of delivery as shown in images Notes: - Inspection possible by prior appointment. - Loading can be arranged. Commercial sale – sold without warranty. Subject to changes and errors.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 177 operating hours Features and technical specifications: - Edge Control PPC 322 W control system with 21.5" 16:9 color touchscreen - ECO MODE energy saving function - Motorized pressure bridge adjustment - Extendable workpiece support 600 mm Gbedpoy Rgwqefx An Rol - Extension for extendable workpiece support - LED entrance light, 3-color - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing milling unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensing nozzle) - Cartridge storage for 4 cartridges - GluJet collection container - Pressure unit DW 301 with motorized NC axis - GM301 spray device after pressure unit with lubricant for high-gloss edges - Kappa unit 1918 pneumatic (60 mm) - Extraction hoods for Kappa unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1 incl. motorized horizontal axis adjustment - Shelf program - Scraping unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray device for separating and cleaning agent - Buffing unit Availability: short-term Location: Flörsheim

Condition: ready for operation (used), zentro-elektrik 8610-1 power supply SN:100611, used, normal signs of use, 100% functional, scope of delivery as per photos Gbjdpfxoy Rcr De An Rol

Year of construction: 2022, condition: excellent (used), RS Simulatoren STK 2000 Dust Test Chamber Manufacturer: RS Simulatoren Model: STK 2000 Year of manufacture: 2022 For sale is a high-quality dust test chamber for standard-compliant IP dust testing in accordance with ISO 20653 and IEC 60529. The system was regularly maintained and serviced by the manufacturer until it was decommissioned. Suitable for industry, automotive, research, development, and quality assurance. Test Programs: - ISO 20653 (IP5X) - IEC 60529 Cat. 1 (IP6X) - IEC 60529 Cat. 2 (IP5X) Technical Data: - Power supply: 400 V AC / 3~ / 50 Hz - Fuse protection: 16 A - Power consumption: approx. 2 kW - Compressed air supply: approx. 6–7 bar (dried, oil-free compressed air) Recommended Operating Conditions: Gbjdey N Sbfopfx An Rsl - Ambient temperature: approx. 10°C to 35°C - Relative humidity: approx. 25–75% Dimensions: approx. 2500 × 1200 × 2300 mm Weight: approx. 1000–1400 kg Equipment: - Siemens SIMATIC HMI touch panel - 2 separate test chambers - Combined test mode - Program operation - Observation window - Removable grating floor - Alarm indicator - Status display for left/right chamber - Robust industrial design Options from the manufacturer: - Vacuum unit according to DIN EN / IEC 60529 - Viewing window - Glove ports - Dust drying system - Dividable test compartment Condition: - Used equipment t- Visual condition as shown in pictures - Scope of delivery as depicted Note: Dimensions and weights are estimated to the best of our knowledge and can be verified on request. All details provided have been compiled to the best of our knowledge based on pictures, nameplates, and publicly available manufacturer information. Miscellaneous: - Inspection possible by appointment - Loading can be arranged Commercial sale – sold without warranty. (Subject to alterations and errors)

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 1,980 mm, conveying length: 1,980 mm, construction width: 685 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 60 kg, TAF item number: 1000005971 Manufacturer: TAF-Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,980 x 685 x 150 Width including side rail in mm: 685 Side rail height in mm: 140 Conveyor length in mm: 1,980 Conveyor width in mm: 600 Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: not available Support roller axle type: M8 internal thread Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Drive: Kyowa Puls Roller Gedpfx Ansy R R I Hs Rsbl Motor type: Puls Roller Motor data: / Conveyor speed in m/s: 35 ZMHT, 0.83 m/s Net weight in kg: 60 Condition: used / fully functional Functional test: OK

Condition: used, Various pistons / cylinders available. Cevoman bvba. Lenskensdijk 5 Gbjdpey R Nu Eofx An Rsl 2200 Herentals Belgium

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour Gbedey Nuf Tjpfx An Rol - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: ready for operation (used), AGIE PMO-03 A Power Module Output 616021.2, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Gbodpoi D Txiofx An Rsl

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Gbedpfx Anjxagwae Rel

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gedoi Ebrgepfx An Rjbl

Condition: ready for operation (used), Bosch NT600 Power Supply . Power supply , used, normal signs of wear, 100% functional, scope of delivery as per photos Gjdpoi D Uayofx An Rebl

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Gbedpfji D Uh Ijx An Rel

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Gjdpfjy Nrynex An Rebl

Condition: ready for operation (used), Fanuc A06B-6077-H111 Power Supply Module V03602951, the left fastening point of the rear connection cover is damaged, see photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please inquire about price separately! Gbjdpjuvhrkjfx An Rel

Condition: ready for operation (used), Siemens 6EV3055-0BC Power Supply Version K , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Godpfx Anei Edv Eo Rebl

Condition: new, B&R 0PS3200.1 Power Supply / Power Supply Unit SN: AF651013647 – 3-phase / 24VDC / 20A, unused in opened original packaging (film is still sealed), 100% functional, scope of delivery as shown in the photos. Godpsy Npwqefx An Rsbl

Condition: ready for operation (used), Fanuc A14B-0067-B001 04 Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gbedpfx Anei D Uz Ds Rel