Used Pneumatico St-1400 for sale (16,665)

Condition: ready for operation (used), Heatsink with 6 Fuji Electric 1DI300G-100 units, from Siemens 6SC6115-5VA01 E/R module, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpfxoi Ebw Ee Ahbotn

Condition: good (used), Drilling machine, drill press, pillar drill, column drill Ijdpoqzl Hiefx Ahbstn -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted Itedpfx Ahodz A Tpeben -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm -Brake -Design: B5 Isdpob A Ha Hefx Ahbotn -Protection class: IP 54 -Weight: 12 kg

Condition: good (used), Year of construction: 2000, Tray trolley, paint drying trolley -Total length: 1400 mm -Total depth: 960 mm -Total height: 2000 mm -Compartment height: 28 mm -Shelf load capacity: max. 15 kg -Number: 2 cars available -Price: per piece -Weight: 127 kg/piece Itedpfx Ahjb A Hcmsbon

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,371 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Sideloader Mast type: Standard Itjdpju Acy Rofx Ahbsn Condition: Ready for use and fully functional Technical condition: good

Condition: new, Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: D 25217, overall weight: 970 kg, fuel type: diesel, tank capacity: 210 l, color: grey-black, power: 29 kW (39.43 HP), output current: 63 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 26.4 kW (35.89 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,000 mm, total width: 115 mm, total height: 1,490 mm, rotational speed (max.): 1,800 rpm, motor manufacturer: Mitsubishi, type of cooling: water, number of cylinders: 4, Equipment: CE marking, ## FOGO Generator Set 30/33 kVA – Mitsubishi Engine – Leroy Somer Generator – Soundproofed ### Manufacturer FOGO ### Engine * Manufacturer: Mitsubishi (Japan) * Model: S4S-61SD * Emission Standard: Stage II * 4-cylinder diesel engine * Water-cooled * Rated speed: 1,500 rpm ### Generator * Manufacturer: Leroy Somer (France) Isdpszk Dt Tjfx Ahbotn * Power: 30 / 33 kVA * Voltage: 230 / 400 V * Frequency: 50 Hz * AVR voltage regulation ### Control System ComAp InteliLite AMF25 * Digital control and start unit * Automatic mains monitoring (AMF) * Automatic start function (for ATS box) * Display of voltage, current, frequency, and power (kW) * Engine monitoring * Operating hour counter * Maintenance interval display * Integrated battery charger ### Technical Data * Dimensions: 200 × 113 cm * Weight: 970 kg * Fuel tank capacity: 210 liters * Sound level: approx. 66 dB(A) at a distance of 7 m * Fuel consumption: * 4.4 l/h at 50% load * 6.4 l/h at 75% load * Integrated spill containment tray for fluids: approx. 50 liters ### Scope of Delivery * FOGO generator set 30/33 kVA * Soundproof enclosure * Digital control system * Fuel tank * Starter battery * Exhaust with silencer * Socket package (SOM) included ### Optional Accessories * ATS box (Automatic Mains Failure / Automatic Transfer Switch) available. * Additional cost: €2,400 * Delivery time: approx. 4–8 weeks ### Display Messages Maintenance / Service * The maintenance indicator is based on the operating hours and days set at the factory. Since the engine still contains the original factory oil, the maintenance indicator can be reset if desired. Warning Charger * This message appears because the integrated battery charger and the engine/coolant pre-heater are currently not connected to an external 230 V power supply. After connecting the mains power supply, the message will disappear. Inspection and test run are possible at any time by appointment. We are happy to answer any further questions by telephone or message.

Condition: used, maximum load weight: 13,080 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, loading space volume: 11 m³, Equipment: ABS, * ABS * Foldable under-run protection * BPW ECO-Plus axles * 5-chamber rear lights Itodpfx Aszmdaxehbon * Height-adjustable drawbar coupling using an offset plate * Front wind deflector ----Body: 3-sided steel tipper body, heavy-duty side boards on the left (2 supports), Jet side boards, discharge chute at the rear, lashing eyes, roll cover. For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see legal notice) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL Iodpfx Ahszkmqbobotn MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Condition: used, Antike Drahtheftmaschine / Antique Stitching machine antique Drahtheftmaschine Gebr. Brehmer Serial-No. 6387 Wunderschön verarbeitete antike Stockpresse  Beautifully crafted antique Spindle Press Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Iedswq Sxyjpfx Ahbotn On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Workbench, work table, assembly bench, assembly table, worktable, mobile workbench, sewing machine table -Work table: Electrically height-adjustable work table, solid construction with casters -Tabletop: 1400 x 700 mm -Height: 810 to 1180 mm -Drive motor: Baifu 51K120GU-CM-P 230V 120W Itedpjxy Ikuofx Ahbon -Base: 4 swivel casters with locking brakes -Transport dimensions: 1400/700/H810 mm -Weight: 62 kg

Condition: new, spindle mount: MK 4, drilling depth: 160 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 700 rpm, total width: 637 mm, total length: 1,096 mm, total height: 2,120 mm, Equipment: documentation/manual, SB P40 ST GPV R2 Column Drill Maximum bore capacity Ø 40 mm Spindle taper MK 4 Drilling depth 160 mm Iodpfx Ajzqugwehbstn Drilling table size 590 x 450 mm Spindle speed min. 70 rpm Spindle speed max. 1.400 rpm Length 1096 mm Depth 637 mm Height 2120 mm Weight 470 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, functionality: fully functional, HEIDELBERG ST100.2 STITCHING MACHINE Year 2004, second-hand, in excellent condition, cleaned and checked composed by 6 sheet feeders + cover feeder stitching station with 2 heads Isdjzr Halopfx Ahbjtn trilateral (trimmer) controls for signature pick-up and spine length OPTIONAL: double centre-cut

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg 6 units available!!! Like-new condition with minor signs of use, see images. Itjdpfxszv E Dde Ahben Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only.

Condition: ready for operation (used), Heidenhain ST 1277 incremental measuring probe, ID 511 395-01, measuring probe without tip, 90mm long, cable length 1.5m, serial number 30891825S, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itodpfezt H E Dex Ahbsn

Condition: ready for operation (used), Heidenhain ST 3077 incremental measuring probe, ID 511 398-01, measuring probe without tip, 140mm, cable length 1.5m, serial number 38836325T, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itjdszt H Hbopfx Ahbon

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Iodpfx Ahjzb Etdobjtn Year of manufacture: 2026 Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, plate width: 1,050 mm, plate height: 1,035 mm, overall weight: 12,000 kg, Robot W 621-ß077 x/y/z: 550/1200/2530 mm C-axis: max. rotation 90° Core pulls: yes Itjdszyfw Ejpfx Ahbjn Hot runner controller IMM 8 Control system: MC 4

Condition: used, mileage: 245,000 km, power: 265 kW (360.30 HP), first registration: 02/2001, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2001, MAN 33,364, 2001, 6x4 with hub reduction, Iodpozyp A Eofx Ahbstn Fully leaf-sprung, Manual transmission, Stainless steel tank, No pumps! = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, overall weight: 5,143 kg, controller manufacturer: HAAS, controller model: NGC, number of axes: 3, This 3-axis HAAS ST-30Y was manufactured in 2023. It features a maximum turning diameter of 349 mm and a maximum workpiece diameter of 521 mm. The machine is equipped with a turret capacity of 12 tool stations and a chuck diameter of 254 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30Y horizontal turning machine we have for sale. Contact us for further details. • Number of tool slots: 12 tool stations • Main electronic connection: 400 V • Chip conveyor: HENING 103173 belt chip conveyor (2023) • Lubrication tank: Automatic central lubrication system • Year of manufacture: 2023 • Serial number: 3126818 • Maximum turning diameter: 349 mm • Maximum workpiece diameter: 521 mm • Chuck diameter: 254 mm (10") • Live tool power: 9 kW • Live tool speed: 4,000 rpm • Work lights • Coolant tank with pump • SAMCHULLY HS-10VI hydraulic chuck • BMT65 turret • Spindle speed range: 50-3,400 rpm Technical Specification Itedszk Eguepfx Ahben Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2025, functionality: fully functional, NEW – PBE Series Automatic Panel Bending Center | 5 models available | Immediate delivery from stock Condition: New, Year of construction: 2025, Functionality: Fully operational TECHNICAL SPECIFICATIONS: Max. bending length: 1,000 mm (PBE-1000) – 3,000 mm (PBE-3000) | Customizable Max. bending width: 1,000 mm (PBE-1000) – 1,400 mm (PBE-1400) | Customizable Max. bending height: 170 mm (all models) | Min. 110 mm for t-1 mm available on request Minimum workpiece size (all four sides): 110 mm (PBE-1000) / 200 mm (PBE-1400 to PBE-3000) Minimum workpiece size (one side): 100 mm (PBE-1000) / 170 mm (larger models) | Hemming: 130–180 mm Bending angle: ±0–180° (all models) Minimum sheet thickness: 0.35 mm MAX. HOLDING FORCE (Standard / Heavy): PBE-3000: 115 T / 155 T PBE-2500: 80 T / 115 T PBE-2000: 38 T / 53 T PBE-1400: 28 T / 38 T PBE-1000: 20 T MAX. MATERIAL THICKNESS (Standard / Heavy): Material PBE-3000 PBE-2500 PBE-2000 PBE-1400 PBE-1000 Stainless Steel (SS) 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 mm Aluminium (AL) 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 mm Mild Steel (MS) 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 mm Power supply: 380V 50/60Hz (transformer available as an option) MACHINE FEATURES: • Automatic multi-sided bending – no tool changes required • Universal tooling automatically adjusts to programmed dimensions • Positive and negative bending in a single setup: arcs, hemming, combined angles • Bending speed 0.2 s/bend – 3× faster than conventional CNC press brake • Intelligent CNC control system for consistent, repeatable results • Single setup positioning – first-edge shearing error is controlled • Multiple positioning references selectable according to workpiece geometry • Energy-saving design – reduces labor and tooling costs TYPICAL APPLICATIONS: Fire doors, elevator panels, computer cases and enclosures, furniture, integrated kitchens, HVAC covers, commercial cold chain equipment, lighting, storage shelving, ceiling panels, air purifiers Ijdpfjymcvtex Ahbotn INCLUDED SERVICES: • 12-month warranty • Spare parts availability • Technical support and commissioning • CE documentation available upon request Offered by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK, and EU. Price on request.

Condition: good (used), Technical specifications of the pallet racking upright: Racking system: SSI Schäfer Type: PR 600 Scope of supply includes: 01x pallet racking upright, used Material finish: Sendzimir galvanized Upright type: P115 Profile dimensions: 100 x 100 x 2.50 mm Including horizontal and diagonal braces, and base plates The uprights are pre-assembled (bolted truss frame) Height: 8,500 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Itjdpjx R S Afjfx Ahbjn General information about the item: This item is offered for collection only. Any transport or shipment requests beyond this are subject to additional costs, which can be clarified upon request depending on delivery location and scope.

Condition: new, axle configuration: 3 axles, total width: 27,500 mm, Equipment: ABS, Ebert TL 30 ST LB special low-bed trailer, fully flat bed, self-supporting design. Permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions: 13,600 mm x 2,750 mm (also available in a standard version), fully air-suspended, last axle with trailing steering, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For further information, please visit our website. Errors and prior sale excepted! Itsdpfx Ahsyfu Urjbsn = Further information = Please contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials Itsdpfx Aey Edlhjhbon • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: used, Manufacturer: SPALECK Itjdey Nlmbepfx Ahbon Drum diameter: 1100 mm