Used Plan 80-8/100 for sale (58,253)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Bedpfxey Hkfdo Aa Dodb Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Bsdsy Hkd Hepfx Aa Dedb Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric Bsdpfx Aaeyf Hpzj Dodb - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Bdodpfswltr Rjx Aa Deb Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Bsdpfx Asyypmmja Dedb

Year of construction: 1990, condition: not inspected (used), The crane is dismantled. Storage location Oebisfelde. Bsdpfjf Sftljx Aa Dedb

Year of construction: 2009, condition: ready for operation (used), This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information. Bodsx D Iwiopfx Aa Dodb

Condition: excellent (used), Year of construction: 2021, HAWKER battery 80 Volt type 8 PZM 1240 Dimensions: 1495 x 995 x 780mm Bdjdpfx Ajyvulmoa Djb Year of manufacture: 2021 Other sizes (24V, 48V, 80V) available on request!

Condition: used, mileage: 23,135 km, power: 154 kW (209.38 HP), first registration: 08/2002, fuel type: diesel, empty load weight: 7,105 kg, maximum load weight: 3,045 kg, overall weight: 10,150 kg, tire size: 335/80R22.5, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 9, Equipment: ABS, all wheel drive, cabin, differential lock, parking heater, trailer coupling, Vehicle location: Bovenden, crew cab, sun visor, auxiliary heater, 6-speed manual gearbox, ABS (anti-lock braking system), frame covers, differential lock, rotating beacon, storage box. Body: Magirus fire engine LF 8/6 with 600-litre water tank and built-in FPN 8/8 fire pump, several units available from EUR 15,000 to EUR 39,000. Sale to business customers or for export is subject to an additional 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY; subject to changes, interim sale, and errors! Bdjdpfxevmhudo Aa Dob

Condition: excellent (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 800 x 8 mm -Inside: Ø: 80 mm Bedpfx Asvy Umtja Dsdb -Hole circle: Ø 120 x 22 mm / Ø 160 x 26 mm -Number of teeth: 118 teeth -Weight: 20 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor Bdsdpfx Aaom Sk Ilo Djb -Manufacturer: MAZ, gear motor with brake -Transmission: Type 80 SD S1 i= 41 / 1 -Speed: 16.3 rpm -Motor: Type B80S/8 K4 0.25 kW / 670 rpm -Shaft: Ø 20 x 40 mm -Protection class: P54 -Brake: 4 Nm -Dimensions: 460/210/H225 mm -Weight: 22 kg

Condition: good (used), gear motor, electric motor, electric gear motor Bjdpfxjpu Iuyo Aa Dodb -Manufacturer: VEM, gear motor with brake -Type: ZG2 BMREA 80 G 8-4 AF -Speed: 40/80 rpm -Power: 0.4/0.7 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 6.86 Nm -Quantity: 1 pieces available -Price: per piece -Dimensions: 560/200/H265 mm -Weight: 34 kg/piece

Condition: good (used), Pneumatic filling machine with filling bend Function The machines work according to the piston principle of suction - discharge. One or two dosing pistons are driven by pneumatic cylinders. The desired filling quantity is set using a handwheel on a scale on the machine. Bedpsrt Un Ejfx Aa Dsdb ■ Pneumatic volumetric piston dispenser Filling capacity 300-800 pieces/h ■ Dosing accuracy +-0.5% ■ Immediately ready for operation, easy handling ■ Easy to clean ■ Filling range 8 - 80 ml / interchangeable cylinder Self-priming ■ Easy to transport for different locations Areas of application: Production and laboratory Chemical industry - cosmetics industry Food and pharmaceutical industry Paint and varnish industry Type: H 80-P-MV Filling range 8 - 80 ml Filling times: 300 - 800 h Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Getriebebau Nord SK71L/8-2 engine with SK12063AZ-71L/8-2 gearbox SN: 201892085-100, used, good condition, 100% functional, scope of delivery as per photos Bdjdpfx Aet Rmztja Deb

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm Bsdpfxeb A Hufe Aa Dedb -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: Bsdpfx Aaeu Impmj Dodb 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long Bdodpfxeu Impts Aa Dob 32x short dividers 1x stacking tray

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,500 h, load capacity: 8,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Deutz, fork length: 2,400 mm, tire condition: 80 %, overall weight: 16,500 kg, Equipment: adjustable boom, cabin, head guard, lighting, pallet forks, retractable fork, sideshift, trailer coupling, SPECIAL DESIGN LIFTING HEIGHT 8 meters !! we are offering: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to drive !! Total weight approx. 15 tons !! RX 70-80 4-wheel diesel forklift used Year of manufacture 2016 Offer is aimed at tradespeople, dealers, public and church institutions! Please only serious inquiries!! We are offering items from various acquisitions, which we describe as best as possible and provide meaningful photos. Further information about the item cannot be provided. Due to time constraints, we can only offer answers to this article if you provide us with a telephone number with your inquiry. Unless expressly described, this offer is used goods. Item is ready to drive with signs of use. Existing defects can be discussed by telephone All offers from stock 47441 Moers. Manufacturer: STILL Type: RX 70-80 Load capacity 8000 kg Lifting height 8000 mm Fork adjustment device (double) Bedjvq I I Eopfx Aa Djdb Fork length 240 cm, double pair of forks Year of manufacture 2016 Hours: approx. 15,000 per forklift Weight: 15 tonnes per forklift Fork adjustment device Full cabin Height 4000 mm For data see photos. Other industrial trucks in stock!! We offer the possibility of viewing on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by arranging an appointment by telephone. If required, the item can be taken away immediately. All dimensions are approximate Other offers from catering, storage technology, trolleys The following applies to all offers: All information is subject to change - photos are similar!!

Condition: good (used), Insulated, heatable/coolable, cylindroconical, stainless steel fermentation pressure tanks (former beer storage tanks) standing on steel base ring - used - (tank with papers) capacity approx. 100.000 ltr. operating pressure: 1 bar inner diameter approx. 3.900 mm outer diameter with insulation approx. 4.100 mm cyl. height approx. 9.365 mm total height approx. 13.580 mm weight approx. 12,640 kg vessel with upper cone bottom and lower cone Vessel shell and cone provided with cooling zones. Cooling zones jacket designed for 0.4 bar Cooling zones cone designed for 0.5 bar Complete vessel approx. 100 mm foamed with PU foam, with galvanized, screwed cover plate (plate may have to be replaced) Connections: on top bottom in the middle: 1 flanged connection piece NW 500 with pulled-down CIP line DN 80 1 venting spigot DN 200 Bjdef Iylyepfx Aa Dsdb on the jacket: Connection flanges NW 50 for coolant inlet and coolant outlet at the cone: 1 manhole 450 x 350 mm Cone tip ends in an outlet connection DN 100 otherwise according to drawing + photos

Condition: new, 8 St. range L-W-H 880 x 580 x 1000 mm weight 156 kg Bdsdpfxsu Imf Ie Aa Deb 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper Bedpoy E Hufsfx Aa Dodb • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads Bdedpjl Dw Nxjfx Aa Dsb long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. Bdjdpjy Eb Sfsfx Aa Djb COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 390 kW (530.25 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH V-80 mobile vertical shaft impact crusher is a fully equipped mobile sand production plant specially designed for producing high-quality fine aggregate and cubic-shaped sand. This plant delivers superior performance in 0–5 mm particle sizes thanks to the VSI 800 CR vertical shaft impact crusher technology developed with advanced engineering solutions. Its compact design, easy transportability, and high efficiency deliver excellent results, especially when processing rocks of varying hardness, such as granite, basalt, dolomite, gabbro, and limestone. The V-80 can be fed with natural stones up to 40 mm in size after primary or secondary crushing. The plant provides a production capacity of 150 to 200 tons per hour, depending on the hardness of the stone. During production, three different fractions can be obtained simultaneously, in addition to material smaller than 5 mm. The hydraulic foot system, short assembly time, and PLC-based automation structure offer maximum ease of use for the operator. Furthermore, it guarantees long-lasting and reliable operation with Siemens – Schneider brand electronic components. Bjdoxpxdkspfx Aa Dsdb V-80 Mobile Vertical Shaft Crusher Technical Specifications Production Capacity: 150-200 tph Maximum Feed Size: 40 mm Feed Height: 4.5 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 390 kW Electric Generator Requirement: 700 kVA Plant Weight: 40 tons Plant Dimensions: 18.8 (L) x 3.65 (W) x 4.4 (H) meters Chassis Type: Single chassis with wheels, equipped with hydraulic legs Why Choose the V-80 Mobile Vertical Shaft Impact Crusher? At CONSTMACH, we offer our customers maximum efficiency, low maintenance costs, and quick installation advantages in rock crushing and screening processes. The V-80 model provides flexibility and operational ease in the field with both its high production capacity and mobile design. Its compact chassis, which can be transported with just a tractor, allows for quick transitions between different construction sites. Moreover, it guarantees uninterrupted production in all conditions with its dust reduction system, remote control support, and optional diesel generator integration. With its durability, energy efficiency, and world-class engineering quality, the V-80 has become synonymous with reliability and performance in sand production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Bdjdpfx Aaeyrh I Ej Dsb Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use