Used Orma Frame Press 11/23 for sale (34,537)

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Itedpfx Ajtqwtdoa Eei Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Iodpfsd Swtaex Aa Ejti Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment Iodpfxodzqddj Aa Eeti - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Iodpfx Aaod Ih H Se Eoti

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Itjdpfx Aaed Ih H No Eji Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Itedpfov Iv Sgox Aa Eji Length = 3700 mm Height = 2310 mm Features: Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, pressing force: 160 t, table length: 3,500 mm, total length: 4,650 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, operating temperature: 130 °C, opening width: 480 mm, plate width: 1,300 mm, temperature: 130 °C, Equipment: hot water, ORMA NPL-8-160 Shelf Press Specification: • Condition - used, fully serviced • Manufacturer - ORMA • Model - NPL-8-160 • Shelf dimensions: 350 x 130 cm • Maximum clearance between shelves: 480 mm • Straight, clean shelves with no dents or damage • 8 cylinders, each 85 mm diameter • Maximum pressure: 350 bar • Maximum pressing force: 160 tons • Option to operate with only central cylinders (for short workpieces) • Automatic repressurization in case of pressure drop • Glue curing timer with automatic shelf lowering • Shelves suitable for water/glycol or oil heating • Circulating pump and heating boiler included • Maximum heating medium temperature: 130°C • Equipped with a safety wire (emergency stop) • Original paint, all parts original Itodjxdxwajpfx Aa Esi • Weight approx. 6000 kg • Year of manufacture: 1991 • Overall dimensions: 465 x 165 x 225/255 cm (L x W x H / H with collection tank) Additional information: • Perfect, factory-grade technical condition • Photos shown represent the actual condition of the item for sale • Demonstration and inspection of the machine on-site possible

Condition: excellent (used), Year of construction: 1992, 4.5 kW motor Working height 245 cm Itedjtq S H Aepfx Aa Eei Working width max. 365 cm

Condition: used, Year of construction: 1994, Frame press, Schafberger & Sprödhuber Type Super 4 kW Iedsilurnspfx Aa Eoti 3 m x 6 m

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm 2 heating rails Iodjd H Irfjpfx Aa Eoti

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto Iedpfxoyuxko Aa Eoti

Condition: used, used Itedpfx Aaowqg R Re Eei Brand: Maweg Type: RPV Machine no.: 74019 Cylinders horizontal: 2 Cylinders vertical: 3 with weight compensation Cylinder stroke 100 mm Working width 3700 mm Working height 2480 mm Press depth 100 mm hydraulic Additions for small window sizes Space required approx. 4200 mm x 1350 mm x 2900 mm Weight approx. 1200 kg Total connected load 2.2 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected without guarantee and warranty

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Isdsvwfw Djpfx Aa Esti

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm Isdpfx Aajfcw Ape Esti width 1100mm depth 1500mm

Condition: new, Technical Data • Application: for frame assembly • Minimum frame outer dimension (mm): 120 x 120 • Maximum frame outer dimension (mm): 700 x 2200 • Machine length (mm): 2750 • Machine width (mm): 1250 • Machine height (mm): 900 • Machine available in special sizes Machine Features • Precise alignment of frame strips eliminates any displacement of the mitered surfaces relative to each other. • Manual alignment of frame strips is no longer required. • Frames can be produced economically through automation. • Frame dimensions are not limited by the machine design. Isdefiqlljpfx Aa Esti • Various popular methods for joining frame miters are possible. • The compact design results in a small footprint for the machine. • Simultaneous gluing of the center layer is possible. • Complete fronts can be glued in a single process.

Condition: excellent (used), Year of construction: 1998, Double end tenoner Homag 4+4 motors Opening side 2500 mm Feeding speed 4-24 m/min. Itjdpfx Aorcbccoa Eei Perfect for panels, windows, furniture

Condition: used, Year of construction: 1977, used, good conditionMake MawegType HSYear of construction 1977MachineNo. 721104881cylinder horizontal 3 xwith weight compensation 3 xcylinder vertical 2 xwith weight compensation 1 xcylinder stroke 250 mmworking width 3550 mmworking height 2600 mmpressing depth 80 mmhydraulicspace requirement approx. 4000 mm x 800 mm x 3000 mmtotal connected load 1.1 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Ijdovwffhspfx Aa Eeti

Condition: ready for operation (used), Year of construction: 1993, machine/vehicle number: 9306005, functionality: fully functional, Motorquickomat Z Automatic width and height adjustments Wood scanning Ijdpfx Aaowa Sxxs Eoti Controlled pressing time

Condition: good (used), For fully automatic assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 700 x 2,500 mm Isdpfedhdg Iox Aa Esti

Condition: used, Year of construction: 1990, used Itedpfevwfa Esx Aa Eei manufactured by Steton type SOPE built in 1990 cylinder horizontal 3 cylinder vertical 3 working width 3050 mm working height 2050 mm hydraulic required space ca. l x w x h mm 4100 x 1300 x 2600 weight ca. 1500 kg total connected power 2.2 kW located in 97447 Gerolzhofen sale in current condition

Condition: good (used), ZIM Hülsta cabinet press NOW Easy Make: ZIM Hülsta-Werke Isdpsvdbv Aofx Aa Esti Type: NOW Easy Ser. no.: 380125028 Carcase max. 260 x 1100 mm 2 supports at the bottom, movable 2 press bars at top, movable Beckoff control panel Roller conveyor 4500 x 600 mm Roller width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, 4 glueing poles, 1 pressing bar, hydraulic, external sizes L x H 3000 x 2000 mm, ca. 200 kg Itodpfovrv H Sox Aa Eoi

Condition: used, Membrane Press - ORMA PM, CE Working dimensions: 2400 x 1000 mm Pressing force: 200 t Heating plates: Yes Double membrane: 1 Isdjxvzahopfx Aa Eoti Principle: Overpressure system Total power: 52 kW Overall dimensions: 3800 x 2000 mm

Condition: used, Year of construction: 1986, - 2 pneumatic cylinders along the length - 2 pneumatic cylinders along the width - 2 pneumatic workpiece clamping devices - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Machine dimensions: Iodpfx Aajiim Rne Ejti - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Condition: used, Year of construction: 1995, functionality: fully functional, Press platen (working area) 2500 mm × 1300 mm Maximum workpiece (panel) length 2500 mm Maximum workpiece width 1300 mm Workpiece thickness (typical operating range) min ~ 12 mm, max ~ 50 mm (for standard configuration) Total pressing force / pressure capacity up to ~ 90 tonnes (depending on configuration) Heating / Heating plates thermal-oil heated platens; working temperature up to ~ 120 °C (in heated-platen version) Power supply / Installed power (some listings) earlier listing cites ~ 5.5 kW for cold-press version. Ijdsx Ezpwepfx Aa Esti 6 vertical cylinders (for platen pressure) in some full-spec versions.