Used Okuma Macturn 30 for sale (25,028)

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Workholding and tooling are not included. MUST BE PICKED UP BY SEPTEMBER 2026. Cjdpfxjzw Nu Ne Albohb

Condition: ready for operation (used), Year of construction: 1974, Available immediately ex-works: L & Z lathe, Okuma Center height 220 mm Chsdszwuftjpfx Albsb Diameter over bed 440 mm Diameter over cross slide 300 mm Spindle bore 55 mm Drive power 5.5 kW Chuck Tool holder Weight 2400 kg Price: EUR 1,500.00 plus VAT, ex-works

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank Cedpfx Alsv S Svvobjhb - immediately available

Condition: excellent (used), Year of construction: 2005, operating hours: 6,820 h, functionality: fully functional, turning length: 1,075 mm, turning diameter: 620 mm, spindle bore: 110 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,075 mm, rotational speed (min.): 3,000 rpm, total height: 2,780 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 8,600 kg, CNC Lathe with c-axis Okuma - LB 400M MACH-ID 9780 Make: Okuma Type: LB 400M Control: OSP-E100L Year: 2005 KITAGAWA 400 mm chuck Spindle bore 110 mm Chip conveyor Feed rate X-Axis 20M/Min Feed rate Z-Axis 25M/Min Coolant and Filtration system Codpfxezu Nu Re Albjhb Max. turning Ø: 620mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 110mm Speedrange: 3500Rpm Spindle power: 45kW ATC / revolver: 12 Speed live tools:3000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 6820H Pinole taper: 5Mk Length: 5800mm Width: 2100mm Height: 2780mm Weight: 8600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) Chjdeyxccrepfx Albeb - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER Csdpfezwdw Esx Albohb OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: good (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100M, table width: 500 mm, table length: 500 mm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 12,000 h, coolant supply: 70 bar, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, Horizontal machining center Okuma MB 500H with a 2-position pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant pressure: 70 bar Travel distances: X-axis: 800 mm Y-axis: 800 mm Chjdpfx Aljzv Iabobob Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500x500 mm Accessories: - Coolant system, type ConSep 2000, by Mayfran - Chip conveyor, type ConSep, by Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 Cjdpfjwm Rrdjx Albshb 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 . 03487 Chjdpfx Ajy Suyvslbob

Condition: used, OKUMA DC POWER SUPPLY Chodpfx Asy Supwslbeb DCPS-1 FOR 2 AXES

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Chodpfoy Suw Uox Albeb

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from production facilities that were in operation until they were decommissioned. Cjdpfx Aljyn R S Eebohb Condition: used (functional)

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 Cjdpfxjy S Dr Uo Albehb . 2663

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Csdpfszt H Uxox Albohb Made in Germany.

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Cedpfx Aeztqt Solbehb Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Chodpfx Ajztctqjlbjb Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP E-100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. The machine have room for 320 tools in ATC, preparation for Fastems and Concept2000 conveyor. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits Chodpjzr Ny Uefx Albjb • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power Technical Specification Taper Size BT 50 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t Codpfx Alozr Hyfsbshb dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Csdpfjzru Uksx Albjhb Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. Chsdpfx Aljzrttfsbob The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Condition: excellent (used), Year of construction: 2013, operating hours: 8,200 h, functionality: fully functional, Control unit: OSP-P300M-R Table dimensions: 1530 x 660 mm Table load: max. 1500 kg X-axis travel: 1500 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 12000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 11000 kgs Dimensions (L x W x H): 3200 x 2950 x 2800 mm Codpfx Aoy T Nhdelbjhb Accessories / Equipment: - Chip conveyor MAYFRAN - Coolant through system (CTS) with high-pressure pump - Spindle chiller - Transformer - Machining NAVI - DNC-T1 data communication - One Touch IGF - Helical cutting - Graphic-iMAP - One touch API - Common Variables: 200 - TAS-C (Thermo Active Stabilizer - Construction) - RENISHAW infra workpiece presetting system without touch probe - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Chedpsvmzc Uofx Albeb Swing dia 300 mm Turning dia 170 mm Between centers 340 mm X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg Codpfozrmw Dox Albshb – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Year of construction: 1988, condition: ready for operation (used), Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible. Chedpfx Aljwz N Tcjbsb

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Cjdpfjxph Sqjx Albjhb