Used Nozzle for sale (2,570)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,720 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,235 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Laodpfezk Sauex Abzog Technical condition: good Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 625Ah Battery manufacturer: Kapatest, 95% capacity Battery year of manufacture: 2019 Description: New black SE tires, new orange paint, new gray paint for step plates, repair of ventilation nozzles and heater, new rear window, battery regeneration, equipment cleaning, new inspection, new acceptance according to FEM. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, impulse control, CE certificate.

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Lodpfszxnu Dox Abzsag Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: excellent (used), CATALOGUE NUMBER 8037 TECHNICAL DATA - Max. width of the workpiece: 1100 mm - Max. height of the workpiece: 160 mm 2 units: 1) Metal, grooved roller for calibrating 2) Rubber, grooved roller + pneumatic sequential apron + metal roller - Motor power: 15 kW - Brake - Top: - Rubber roller, slip, split - Unit - Rubber roller, slip, split - Unit with apron - Rubber, slip, split output roller - Bottom: - 2 metal rollers, slip - Conveyor belt - 2 metal rollers, slip, output - Pneumatic belt oscillation with photocell - Electric table lifting Lsdpfx Abozx Sm Dezeag - 2 feed speed types - Feed motor: 0.45 kW / 0.8 kW - Grinding thickness potentiometer - Working pressure: 8-10 bar - Diameter of dust extraction nozzle: 2 x 160 mm - Overall dimensions (L/W/H): 1900 x 1700 x 2000 mm - Weight: 1413 kg ADVANTAGES - Made in Italy, SCM brand - 2 units - Grinding thickness potentiometer - Pneumatic sequential apron - Not painted - DTR documentation - Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, controller manufacturer: Siemens, laser power: 20,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-spec YAWEI HLF1530 fiber laser machine (20kW). Available for immediate delivery. Specifications: Power: 20kW Sheet size: 3000 x 1500mm Automatic shuttle table with light barriers Precitec Auto Focus Procutter 2.0 cutting head with sheet measurement and nozzle cleaning Automatic nozzle changer Automatic nozzle centering Max Photonics 20kW resonator Siemens ONE control system with LAN/USB Siemens drives THK guideways Small parts conveyor belt Ball-transfer table for easy, scratch-free sheet handling 24-month warranty CAD/CAM software Commissioning Delivery (within Germany) Training CE certification Optional loading and unloading system available. This is a new machine currently in stock. An identical model is available for live testing at our facility at any time. We have been distributing YAWEI machines for over 20 years. We handle everything in-house, from transport and training to maintenance and warranty services. Give us a call! Lsdpfjzx Uw Ejx Abzoag

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle - flexible connection Lsdpfx Aszxyvgjbzeag -Handover: in its current condition as inspected -Seal: damaged, see photos -Ventilation duct: Adapter with elastic connection -Opening: 925 x 855 mm / 750 x 750 mm -Height: 355 mm -Transport dimensions: 925/855/H355 mm -Weight: 18 kg

Condition: good (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l Ledpfx Ajxyf E Nsbzoag • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: new, Year of construction: 2026, Untha Shredding Solution LR700 Technical Data - Cutting unit opening: 700 x 1,065 mm - Drive description: Belt drive with 2-stage gearbox and elastomer damper - Drive power: 18.5 kW - Hydraulic power: 1.1 kW - Rotor speed: 98 rpm - Voltage / Frequency: 400 V / 50 Hz - Energy efficiency class: IE 3 - Rotor cutting system - Design: Smooth - Rotor diameter: 300 mm - Number of knife rows: 1 piece - Number of cutting tools: 19 pieces - Dimensions L x W x H: ≤ 500 x 200 x 100 mm Lajdozykvtopfx Abzeg - Prohibited feed materials: ≥ 150 nails and ≥ 6 screws - Chip discharge: on-site extraction system - Extraction nozzle Ø: 200 mm - Control: Siemens SIMATIC S7-1200 / CPU1214 The warranty period for the shredding machine is 3 years or 2,000 operating hours (whichever is reached first). Figures 5-7 show a demonstration machine for viewing purposes!!!!!

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Ljdpfx Ajzy Iacjbzsag Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Lsdpfx Aozy Ib Tjbzoag Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Technical specifications: Working width: 1100 mm 1 Combined unit Shaft diameter: 200 mm Height of material being processed: 160 mm Dimensions of the abrasive belt: 2300x1115 mm Belt feed speed: 2 speeds Diameter of the dust extraction nozzle: 2x180 mm Electric lifting mechanism Analog display Safety switch Main motor power: 9.5 kW Voltage: 380 V Overall dimensions: Lasdszza I Iopfx Abzeg Length: 1950 mm Width: 1800 mm Height: 2300 mm

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor Laedpfoxabp Djx Abzog with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED Laodpfx Aexaarqebzjg weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. Ljdjxak Dqjpfx Abzeag air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable Ljdpfoxabztsx Abzjag - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 Ledpfexab Dzox Abzsag - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: new, Year of construction: 2025, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Laodov Nlbgspfx Abzsg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; lid dimensions: Width max. 80mm, length max. 120mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L16273xW5404xH2350 mm; total weight: about 12000kg; power: 27kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the packaging and lid closing unit on request. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lasdpfxov Nma Ds Abzsg

Condition: new, Year of construction: 2025, operating hours: 23 h, functionality: fully functional, Only 23 hours of use. New price: €18,736. The CT80 is the smallest in the family of ride-on scrubber-dryer machines. It is compact but knows how to work hard. With its robustness and power, it handles many industrial cleaning tasks. It is versatile, as it comes in two versions: for intensive use, there is the model with 2 brushes (CT80-BT70), and there is also the ECO model (CT80-BT55 ECO) with one brush and therefore a smaller working width. (Excluding charger and batteries) Product specifications: Extremely compact (130 cm length) with a large tank capacity of 79 and 83 liters, respectively. ECO Select function: program that regulates water and detergent supply in relation to the speed of the machine, the brush, and the suction motors, which reduces both energy consumption and noise production. Simple and clear control panel with language selection. Supplied with a memory card for maintenance and service. CFS system: liquid supply from the center of the brush. Prevents unnecessary waste of detergent. SLS system: self-leveling mechanical system for constant, perfect brush pressure on the floor. EDD system: floor nozzle designed for maximum productivity and perfect drying results. Auto-stop system: Easily deactivate and restart the functions using the foot pedal, including the delayed stopping of the brush and suction motor. Ideal also for uneven floors. Brush, suction rubbers, and water hoses can be replaced without tools. Dosing system for detergent supply. Ensures systematic savings on detergent consumption. The tank is easy to remove. Anti-foam system with special electromagnetic protection of the suction motor. The automatic suction stops when the tank is full. Yellow marked service points for easy daily maintenance. Brush with usage indicator. Tiltable tank for easy access to the technical part of the machine. High-quality motor gearbox, suction motor, and electrical components. The standard nylon brushes have a usage indicator. Electronic adjustment of detergent supply. Ljdpjzzlvdefx Abzsag Raised water discharge hose (ø 50 mm). Built-in battery charger. Automatic brush click-on/off system. Brush rotation: independent brush motor with gearbox in an oil bath. Brush pressure: adjustment motor ON/OFF. Vacuum: 2-stage motor with stainless steel fan and shaft. Traction: motor wheel with parallel shaft, 8% climbing capacity. Plastic parts. Tanks: impact-resistant, high-quality plastic (polyethylene). Floor suction rubbers: made of latex (rubber), usable on 4 sides. Hoses: all water supply and discharge hoses are made of durable polyurethane. Wheels: oil-resistant. Chassis: double-treated, partially cast, and galvanized frame. Bearings: protected against moisture and splashing water. Bolts and nuts: where they come into contact with water, made of stainless steel. Control panels: equipped with protective film against splashing water and moisture. Solenoid valve: ‘Viton’ diaphragm resistant to chemicals. Sensors: water level in both tanks is protected against accidental impact. Memory card: for machine data log: For storage of: battery charging cycles, motor absorption. Display: large, multilingual, complete with hour meter, battery voltage indicator, and cleaning programs.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Lsdpfx Abjvyl Dvszjag Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 15.428 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 44,100 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CL1 Steering wheel adjustable in inclination and height, CT1 Vibration damper, CW2 Deletion of vehicle lowering function, D03 High roof, D50 Continuous bulkhead, E07 Hill Start Assist, E1B Storage compartment for smartphones incl. wireless charging, E1D Digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E46 Socket in the cab, E57 Electrical system for trailer socket, E7M MBUX Multimedia System, ED4 Fleece battery 12 V 92 Ah, ED8 Pre-installation for electrical system, parameterizable special module, EE5 Ultracap automatic transmission interlock, ES0 Jump start contact, ES5 Charging package for instrument panel, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F64 Exterior mirrors electrically foldable, F68 Exterior mirrors heated and electrically adjustable, FF4 Storage compartment above roof lining, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, FU5 Exterior mirrors without indicator, FZ5 Anti-theft and break-in alarm system, G43 9G-TRONIC, H15 Seat heating for front passenger, H16 Seat heating for driver, H1I Wide-beam nozzles in instrument panel, H21 Heat-reflecting glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IR4 Wheelbase 3665 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J55 Seat belt warning system for front passenger seat, J58 Seat belt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, K51 Protection against misfueling, KB7 Main tank 93 liters, KP7 Exhaust gas purification SCR generation 4, L13 Fog lamps with cornering light, L44 Direction indicator lamps, front, side, L65 Ceiling light(s) LD/FG compartment with door contact, L71 Load compartment lighting via motion sensor, L94 Deletion of parking lights, LA2 Driving light assistant, LB1 Lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the load compartment, LC4 Comfort roof control unit, LE1 Adaptive brake light, LG7 LED High Performance headlights, M60 Generator 14 V / 250 A, M72 Vehicle capable of using HVO fuel, MJ8 ECO Start/Stop function, MS1 TEMPOMAT (cruise control), MT5 EMISSIONS STANDARD EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, P2L Load compartment package 2, Q11 Longitudinal member reinforcement, Q67 Towing eye, rear, RH2 Tires 235/65 R16 C, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, S22 Armrest for driver's seat, S23 Front passenger seat, double seat, S87 Driver's seat box, low, SA5 Airbag driver, SA6 Airbag front passenger, SB3 Suspension seat, comfort version, driver's seat, SK2 Driver's seat occupancy detection, T16 Sliding door, right, T75 Grab handles for entry, driver and front passenger, T77 Grab handle for entry, load compartm Laodpfx Aozzla Aobzjg

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Laodpozy I Adjfx Abzog Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, MIMAC Volumetric Depositor – 2 Hoppers / 12 Nozzles – 2014 Professional Bakery / Industrial Depositing Machine For sale: professional volumetric depositor MIMAC, year 2014, designed for high-precision dosing of cakes, muffins, sponge batters, creams, and soft pastry products. The machine is in very good working condition and was previously used for cake production. Technical Data Manufacturer: MIMAC (Italy) Year: 2014 Power supply: 200–240V Frequency: 50/60 Hz Power: 1.8 kW Single phase (1Ph) Stainless steel construction Mobile frame on wheels ⚙ Equipment 2 product hoppers 12 nozzles (6 + 6 configuration) Conveyor belt system Touchscreen control panel (very good condition) High precision volumetric dosing system Key Advantages High production capacity Extremely accurate portion control Ideal for industrial & semi-industrial bakery lines Easy cleaning and maintenance Reliable and proven Italian engineering Applications Cakes & sponge batter Muffins & cupcakes Soft dough products Creams & fillings Bakery / pastry production lines Condition Fully functional Well maintained Ready for immediate production Available for inspection and testing Ledpfx Abjy Ucypezoag

Condition: used, mileage: 79,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,440 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Beautiful and well-maintained VW T6 L1 4Motion / All-Wheel Drive van, optimal equipment, ideal for trades and businesses. Workshop/shelving system by Sortimo and electrical systems (details below). Laodpfozz Aaaox Abzjg Rear wing doors All-wheel drive (4Motion, 4M, 4x4, 4WD) Underride protection for engine/transmission made of plastic GVWR 3.2 t (including reinforced 16" steel rims) Trailer hitch with 2.5 t towing capacity LED lamps (low beam + high beam) retrofitted Auxiliary heating / additional heater (water), programmable and with remote control Heated driver's seat Climatic air conditioning with activated carbon filter 3-seater, double passenger seat with foldable work surface Comfort driver's seat with foldable armrests, adjustable in multiple ways: seat height, backrest, lumbar support Seat covers in Simora fabric Driver assistance systems: - PDC Park Distance Control front and rear, visual + audible display - Surround monitoring system (Front Assist) with City Emergency Braking function - ACC Automatic Cruise Control (automatic distance control) - Cruise control (adaptive) with automatic distance control ACC and speed limiter - Fatigue detection - Hill start assistant - Trailer stabilization - Tire pressure monitoring - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP, EDS Light and Visibility Package - Automatic headlight activation - Automatic windshield wipers Leather multifunction steering wheel - Automatically dimming interior mirror Composition Media audio system (radio/CD player, MP3 playback function) - Radio - CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multifunction display Plus / On-board computer Driver and passenger airbags Electrical Package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights Spare wheel and jack 2nd battery with separation relay 2x 12V socket in the cab Heated windshield washer nozzles Wheelbase 3000 mm Sliding door on the right side of the cargo area with tinted glass Rear wing doors with tinted, heated glass, with wiper system Commercial vehicle registration N1 Engine 2.0 L - 110 kW TDI 6-speed manual transmission Steering wheel adjustable in length and height Heat-insulating glass Cargo area equipment: Workshop installation by Sortimo (similar to Aluca, Bott, Würth). Shelving on both sides with shelf compartments, storage compartments, holders for small parts containers (without containers) and drawers (5x). Extendable workbench. Cargo area partition with window. Robust wooden floor. Load securing through fastening rails. Walls (with plastic panels) and ceiling lined. LED lighting. Ventilation and air intake. Electrical systems: 230V voltage converter/inverter, supplied via auxiliary battery. 4 x 230V sockets with fuse protection. Cargo area dimensions: - Length at the bottom: approx. 244 cm - Length in the middle: approx. 225 cm - Length at the top: approx. 220 cm - Height: approx. 134 cm Mounted tires: Winter tires 215/65 R 16 with approx. 5 mm tread depth at the front and approx. 4 mm or approx. 6 mm at the rear Additional tires: Summer tires 205/65 R 16 with approx. 4/4/5/5 mm tread depth Service history according to VW: 06.2021 / 22,700 Longlife inspection 08.2022 / 35,184 Longlife inspection + service 1 + oil change for all-wheel drive coupling 07.20

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: AM970083, Industrial arc spraying system Praxair TAFA CoArc 9910 / 9935 / TCV-400 For sale: a used industrial arc spraying system, Praxair TAFA CoArc 9910 / 9935 / TCV-400. Praxair CoArc 9910: The central control console. It features a modern touch display, on which the operator can linearly set and monitor all parameters (voltage, current, wire feed speed, and atomizing air pressure). Praxair 9935: The associated arc spraying gun. It uses a pull principle (or push-pull in combination with the console) to feed the two metal wires precisely and smoothly into the arc. Maximum current capacity: 350 amps at 100% duty cycle. Wire diameter (standard): 1.6 mm (14 ga) or 2.0 mm (or 1/16 inch to 2.0 mm depending on the installed feed rollers and nozzle kits). Spraying rate (throughput): Up to 20 kg/h (e.g., with zinc or zinc-aluminum wires). Wire feed principle: Powerful air or electric motor directly in the gun (pull principle). TAFA TCV-400: The power supply (inverter) of the system. It is a robust, industrial rectifier (380V/400V connection) that provides constant voltage and the necessary energy to maintain the arc between the wires. The "400" indicates the maximum or rated capacity of the transformer, although the 9910 system is typically operated at up to 350 amps. NH14 Lsdpfjz Aakrex Abzsag

Condition: used, total width: 1,000 mm, total height: 1,600 mm, Colour: Grey Empty weight: 1.300 kg Dimensions (LxBxH): 340 x 100 x 160 cm Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Lodpoyw Sg Djfx Abzoag Spindle left/right 7.5kW Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - Min. planing height [mm]: 100 - Feed table length [mm]: 2300 - Feed roller diameter [mm]: 120 - Feed motor [kW]: 7.5 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels