Used Niro Atomizer Kopenhagen F10 Abc06 for sale (469)

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs Tedpeykucmsfx Amrec F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Tjdpfxoykuiao Amrjc FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz Todpjxnp Haofx Amroc EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: used, Welding edge former, edge former, edge beveling machine TRUMPF Beveling of steel plates for weld preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 volts, 50 Hz Tjdpodz Sq Eefx Amrsc - Equipped with a guide bracket for a 30° bevel angle - Resharpenable impact steel for high tool utilization - Set up for 20 mm sheet metal For beveling straight and curved edges with a minimum radius of 40 mm. For beveling edges on flat and curved workpieces, as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg

Condition: new, For sale: Professional Proval PA125DA pneumatic actuator with complete control equipment. The set includes a pneumatic actuator, IMI Herion solenoid valve, and J J limit switch box in ATEX version. The device comes from warehouse stock, in brand new and unused condition. Technical Data: Manufacturer: Proval Model: PA125DA Type: Double-acting pneumatic actuator Rotation angle: 90 degrees Tedpfxoyvabxe Amrec Operating pressure: 2 to 8 bar Connection: G 1/4 Temperature range: minus 20 to plus 80 °C Standard: ISO F07, F10 Equipment: IMI Herion solenoid valve 230V 50Hz J J ATEX IP67 limit switch box Complete set ready for installation Condition: New, warehouse stock Possible minor storage marks Price per piece

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 450 mm, reverse speed: 230 mm/s, throat depth: 375 mm, ram plate width: 650 mm, ram plate length: 450 mm, total length: 1,240 mm, total width: 1,950 mm, total height: 2,790 mm, overall weight: 3,820 kg, pressure: 290 bar, working height: 850 mm, Equipment: documentation/manual, safety light barrier, Model CF-100/VR + frequency converter, inverter system. We have designed the CF/VR series C-frame motorized hydraulic presses in a range of three different capacities, from 80 to 150 tonnes. Specifically engineered for medium to high volume production processes such as stamping, die-cutting, and deep drawing. The new generation of CF/VR hydraulic presses offers versatile applications, making it possible to integrate these machines into automated production lines. They operate at hydraulic pressures below 290 BAR to ensure increased longevity of the entire hydraulic system. STRUCTURE AND TABLES: The CF/VR series hydraulic C-frame presses feature an electro-welded frame made exclusively of S355JR steel, stabilized and machined after welding to ensure perfect parallelism and high precision. The structure is designed and calculated using finite element analysis (FEA) software, guaranteeing our high standards for precision and quality at all times. Each press is equipped with upper and lower tables made of machined C45E steel, featuring DIN 650 T-slots. The upper table maintains perfect parallelism via four 50 mm diameter lateral cylindrical guides with maintenance-free, anti-friction, bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: The main cylinder is single-acting, with a lapped barrel, chrome-plated piston rod, and maintenance-free wear guides. For rapid approach and return movements, two double-acting lateral cylinders are fitted, also with lapped barrels, chrome-plated rods, and maintenance-free wear guides, enabling fast approach and return speeds. Tedpjwpg Uaefx Amroc The motorized hydraulic unit includes a prefill valve for approach and return, and a fixed displacement pump for constant-speed operations. The assembly also features a check valve, pressure relief valve, cylinder decompression valve, and air-oil cooling system. ELECTRICAL INSTALLATION AND SAFETY: Standard equipment includes a SIEMENS SIMATRIC S7 1200 series PLC and a 7'' tilting touch screen panel (MPT-700 model), enabling programming of press force, cylinder stroke, and speeds, with storage for up to 300 programs. All electric and hydraulic controls are redundant and self-monitoring. An additional safety block and self-checking devices are installed for operational safety. Includes verification and certification of proper functionality and correct safety distances for photocell protection. Activation is via a low-voltage electric foot pedal. To guarantee safety, the presses feature type 4 PLe safety light curtains at the working area front, two fixed lateral safety guards with polycarbonate windows, and internal LED work lighting. Supplied with operator's manual. Fully complies with all essential health and safety requirements according to CE standards.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, lifting height: 1,000 mm, lifting power: 200 kg/m, fuel type: electric, Equipment: UVV, Transport and trade-in possible by arrangement. Tsdpfx Amsytn Eterjc

Condition: used, mileage: 825,000 km, power: 340 kW (462.27 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 8,487 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, | DAF XF 106.460 Super Space Cab | Automatic, Euro 6, Retarder | Multifunction steering wheel, Refrigerator | Cruise control, Air conditioning | Parking heater, On-board computer | Skylights, Stationary air conditioning | Electric windows, Electric mirrors | Side spoilers | Subject to error, input mistake, and prior sale Tedpjxfq Imsfx Amrec

Condition: new, Sieb & Meyer 0362141EF1005 Type: 86/9 S 30110180 Frequency inverter SN: 1000367837, unused in opened original packaging, 100% fully functional, scope of delivery as per photos. Tjdpfxoy Nr Avo Amrjc

Condition: used, Tree diameter 50mm Masterwood 3-Roll Trainer Tedpfx Amsy I Unlsrjc 380V

Condition: excellent (used), functionality: fully functional, Infinitely variable speed: 150 – 2000 rpm Spindle taper: ISO 30 Tedpfx Asy Uv Efjmrjc Feed on X-axis, infinitely variable: 15 – 250 mm/min Travels: X = 280 mm, Y = 170 mm, Z = 250 mm • Universal swivel and tilting table

Condition: used, mileage: 660,199 km, power: 340 kW (462.27 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 8,537 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, truck registration, | DAF Space Cab, EURO6 | automatic, Intarder, electric windows | refrigerator, air conditioning | multifunction steering wheel, cruise control, | auxiliary heating, radio/CD, DTS | digital speedometer, differential lock | errors and omissions excepted. Tjdpfx Amsvia Nxsrec

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5077883, overall weight: 2,200 kg, pressure (max.): 10 bar, Equipment: type plate available, BOGE SLF101-3 Compressor, No. 5077883 Todpfx Amjw R A Ansroc MANUFACTURER: BOGE TYPE: SLF101-1 Serial No.: 5077883 Year: 2014 Power (kW): 90 Capacity (m3/min): 4.94-12.25 Pressure (bar): 10 Operating hours (doc./total): Frequency inverter: yes Built-in dryer: no Heat exchanger: no Cooling (air/water): air On tank: no Documentation: no Condition: used

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. Tedpfozhr Rhex Amrec - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: used, Year of construction: 1990, Max pressure: 28 Bar Flow: 120 m³/h Suction dimension: 20 cm Discharge dimension: 20 cm Used for: Oil, Flammable Liquid Tedpfx Ajywi Ixjmrsc Dimensions (LxWxH): 4 x 1.3 x 1.65 m Approx. weight: 3,800 kg Operating hours: 76 since new

Condition: used, mileage: 658,000 km, first registration: 03/2015, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, DAF XF 106.460 4x2 tractor unit, Euro 6, automatic transmission, intarder, dual-circuit hydraulics, SpaceCap cab with 2 bunk beds, differential lock, chassis side skirts, single fuel tank approx. 600 liters, tire pressure monitoring system, auxiliary heater, stationary air conditioning, seat heating, air horns, light bar, beacon lights, radio/CD, CB radio. Tjdeyzwfyspfx Amrec

Condition: used, Year of construction: 2001, Lippert belt conveyor belt transfer GF 1000-550-400 RA2508 Technical data: Conveying length (NL): 1000 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides frequency converter for stepless speedcontrol Todoy R Hb Nopfx Amroc Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 643,118 km, power: 340 kW (462.27 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,630 mm, loading space volume: 47 m³, loading space length: 7,700 mm, loading space width: 2,460 mm, loading space height: 20,501 mm, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, tail-lift, DAF XF 460 FT Keppler Sliding Wall Beverage Body VIN: OE915762 Chassis / Attachments: * Leaf / air suspension * Lift axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 1+3. 385/55 R22.5 2. 315/70 R22.5 * Remaining tread: approx. 50-60% * 1 x aluminium fuel tank, 620 l * 1 x AdBlue tank * Fixed trailer coupling + under-coupling system * LBW Bär BC 2000 SA, lifting capacity 2,000 kg, year 2013 Body: * Keppler sliding wall body with LBW Bär * Keppler type: 80.18, year 2013 * Body dimensions: 7.70 m x 2.46 m x 2.05 m * 4 x load securing poles * Aluminium floor Cabin / Driver’s Cab * SC cab * 2 x air horns * 2 x bunks * Roof hatch * Air conditioning * Auxiliary heater * CD radio Engine / Transmission * 340 kW / 460 hp // 12,902 cm³ // Euro 5 * ZF AS-Tronic / automatic transmission * ZF intarder * Differential lock * 11 / 2016: Engine and turbocharger overhaul at 453,000 km Weights * Gross weight: 26,000 kg * Payload: 12,500 kg * Unladen weight: 13,750 kg Miscellaneous * German vehicle * Roadworthiness inspection (HU) valid until 10/2026 New roadworthiness inspections, safety checks, or changes to gross weight (downrating/uprating) are available on request. We are happy to assist you with obtaining export/transfer number plates and can arrange transportation of your purchased vehicles throughout the Federal Republic. Contact us!---- Tsdpfx Amjyk N Rxsrec We speak the following languages: German, English, and Russian!---- No liability is accepted for printing or typographical errors. Subject to change, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² site you will find a wide variety of vehicles. Our company philosophy is shaped by fairness and integrity. Since customer satisfaction is very important to us, we offer an excellent all-round service package and provide you with a competent contact person who will assist you with the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to help you with loading your purchased vehicles. Arranging special transports We are happy to assist you in organising special transports. Temporary/export registration plates We are happy to assist you in obtaining export or short-term registration plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: CG017, Cutting width: 815 mm Mounting console, bolting: 352 mm Gearbox incl. hydraulic motors Transverse cutting heads incl. round chisel RM8 Hydraulic connection lines consisting of: Supply/return: approx. 2 m (S25) Tjdpfjyk Sfxsx Amroc Leak oil: approx. 2 m (L18) Operating pressure: max. 320 bar Flow rate: max. 250 l/min Application area: rock up to max. 70 MPa Incl. mounting plate for construction machinery technology Suitable for carrier device Liebherr R914

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Tsdpoyphnyefx Amrjc

Condition: used, Year of construction: 1988, - with a lateral miter saw Tjdpfx Ajbaz E Aomroc

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW Tjdpfxsb N Eh Hj Amrjc space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 2007, operating hours: 14,100 h, Equipment: ABS, Scania G LTF 1045 14010 h OW 122,000 km / UW 35-meter mast very good RUST-FREE condition second owner no pending repairs major service in 12/2023 OW inspection 23.05.2024 Tedpor Icl Djfx Amroc all inspections can be newly performed at handover Wire rope from 2024 everything dry OW air conditioning UW air conditioning UW bed Tires 85% brakes new / clutch new / in use with us Photos are from 2024 Errors or typographical mistakes excepted.

Condition: used, functionality: fully functional, tank capacity: 1,000 l, The Glass VSM/F 1000 is a versatile vacuum mixer that optimizes the processing of meat, fish, fine foods, fruits, and vegetables. Thanks to its vacuum technology, it not only blends but also massages products, improving their texture and quality. Indeed, this mixer is ideal for operations requiring the use of nitrogen or direct steam injection. It also features a mixing arm with a scraper and an electric tilting system, facilitating product unloading. Furthermore, its pneumatic lid ensures safe and efficient operation. Todpfxeu Iafne Amrsc Furthermore, the Glass VSM/F 1000 offers a large processing capacity, making it ideal for companies looking to increase productivity. Thanks to its advanced features, it guarantees homogeneous mixing and optimal food preservation. Furthermore, its ergonomic design facilitates cleaning and maintenance, reducing downtime. In short, this vacuum mixer is an essential asset for improving the quality and efficiency of production processes in the food industry. SPECIFICATIONS: Power: 5.93 kW Current: 13.74 A Voltage: 400 V; 50 Hz Volume: 1000 L Mj+KikOw

Year of construction: 2007, condition: excellent (used), 2 used quick steaming units ----- Tjdpfenp Hvbox Amrec manufacturer : LOOS, Gunzenhausen type : DF 1000 capacity : 1.000 kg/h working pressure max : 31 bar test pressure : 56 bar heating surface : 21,9 m² water contents approx. : 110 l year of construction : 2007 equipped with Weishaupt combined burner gas&oil, type WM-GL 10/3-A, version ZM-T, 110-1.000 kW, oil throughput 20-84 kg/h, switch cabinet built on boiler body, fittings for gas supply, feed water pump and the existing small and large fittings.