Used Mori Seiki Mv-40 for sale (22,557)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Gsdjzcuyiepfx Ad Iobp Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Gbsdpfx Adozablto Iep Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller model: Mitsubishi Meldas MSC-802M, The MORI SEIKI TV-30 is a compact and precise vertical machining center, designed for drilling, tapping, and milling operations on small components. Manufactured in 1996, it is equipped with a Mitsubishi Meldas MSC-802M control and features characteristics ideal for high-speed light machining work, with an automatic tool changer and a well-sized table relative to its compact footprint. General Technical Data Brand: MORI SEIKI Model: TV-30 Category: Vertical Machining Centers Year of manufacture: 08-1996 CNC Control: Mitsubishi Meldas MSC-802M Machine weight: 2 tons Machine Dimensions: Length: 1,200 mm Width: 1,720 mm Height: 2,260 mm Spindle Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): - 3.7 / 2.2 kW (continuous) - 5.5 / 3.7 kW (30 min) Gedpfx Asxfaw Dsd Iebp Machining Capacity X-Axis travel: 420 mm Y-Axis travel: 300 mm + 60 mm Z-Axis travel: 250 mm Maximum drilling diameter: 13 mm Maximum tapping diameter: M12 Table Table size: 600 x 340 mm Table load capacity: 150 kg Feed Rates Rapid traverse X / Y / Z axes: 48,000 mm/min Working feedrates X / Y / Z in linear interpolation (max): 12,000 mm/min Manual feedrates: 0 – 1,260 mm/min Tool Changer Tool taper: BT-30 Shank: MAS-P30T-1 45° Tool magazine capacity: 10 stations Max. diameter of adjacent tools: Ø 80 mm Max. tool length: 200 mm Max. tool weight: 3 kg Other Equipment Manuals, Electrical Schematics and CE Declaration 100-liter coolant tank with pump Transformer

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NL251GL3750, CNC turning and milling center DMG MORI NL2500SY/700 Serial number: NL251GL3750 Available from location: Machine type: CNC turning and milling center Manufacturer: MORI SEIKI Type: NL 2500 Y / 1250 Year of manufacture: 2006 Control system: MSX 850 III MAPPS Country of origin: Japan Delivery time: upon agreement Gbsdpfozcn Hvex Ad Iop Incoterm: EXW (Ex Works) Additional information: CNC turning and milling center MORI SEIKI - NL 2500 Y / 1250 Technical details Turning diameter: 275 mm Turning length: 1,298 mm Control system: MSX 850 III MAPPS Swinging diameter over bed: 923.8 mm Swinging diameter over cross slide: 755 mm Max. turning diameter: 356 mm Max. bar diameter: 80 mm Main spindle: Speed range - main spindle: 4,000 rpm Drive power - main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm C-axis: Travel: X-axis: 260 mm Z-axis: 1,345 mm Y-axis: Turret: Tool positions: 12 Height for square tools: 25 mm Shank diameter for drill rods: max. 50 mm Turret indexing time: 0.25 sec. Speed range of driven tools: 6,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Feed rate: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse Y-axis: 10 m/min Tailstock: Tailstock travel: 1,284 mm Tailstock spindle diameter: 110 mm Taper: MT 5 Rapid traverse: 7 m/min Total power requirement: 38 kVA Machine weight approx.: 7.5 t Space requirement approx.: 5.5 x 3.4 x 2.3 m Accessories: Documentation: Chip conveyor: Hydraulic unit: Coolant system: High-pressure coolant: 3-jaw chuck: Errors and omissions in technical data are reserved. The scope of the accessories is exclusive and limited to the description of the items in the text. No claim is made for any further accessories depicted in the images, for example for illustrative purposes.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Gjdpfx Adjzcla He Ijbp Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts are available from a MORI SEIKI VL250, year of manufacture 2000: 1. Turret (not complete) Ball screw with nut, X and Z axis X and Z axis guide parts are from a new machine Motor, X-axis See photos. Gsdpocbinnefx Ad Iobp

Condition: good (used), Year of construction: 2006, operating hours: 14,119 h, functionality: fully functional, machine/vehicle number: 6682NL151EG0306J, turning diameter: 260 mm, spindle speed (max.): 6,000 rpm, total height: 2,000 mm, total length: 2,185 mm, total width: 2,460 mm, bar diameter (max.): 45 mm, overall weight: 5,300 kg, Machine type: CNC lathe Manufacturer: DMG Mori Gjdoyxnu Hepfx Ad Isbp Model: NL1500/500 Year of manufacture: 2006 Operating hours: 14,119h (as of 17.12.2025) Control: MSX-850 BM Spindle speed: 6,000 rpm Machining diameter: with bar loader Ø16-45mm Tool stations: 12 plus tailstock Weight: 5,300kg Dimensions (W×D×H): 2460×2000×2185mm Transport, collection, and dismantling must be organized by the buyer.

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis Gbjdpoxxraqjfx Ad Iep - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Control: MSG-501 + MAPPS X axis mm: 800 Y axis mm: 510 Z axis mm: 510 Worktable dimensions mm: 1,100 x 600 Table load capacity kg: 1,000 Cutting feedrate mm/min (X, Y, Z): - Max. rapid traverse m/min (X, Y, Z): 42, 42, 42 Spindle speed rpm: 12,000 Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: - Gbsdpfx Adsx Rvtbj Ijp Tool changer type: RANDOM Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 230 Through spindle coolant bar: - EQUIPMENT Chip conveyor Oil chiller Automatic shutdown system DIMENSIONS Length mm: 2,788 Width mm: 2,710 Height mm: 2,603 Weight kg: 6,350

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 Gjdpfsv E R E Njx Ad Iobp power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2008, turning diameter max. 320 mm Godjtqmqwepfx Ad Iobp turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm Gbsdevzhiqjpfx Ad Ijp taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: used, Year of construction: 2010, turning diameter max. 320 mm Gbodpjv E R E Aofx Ad Ijp turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki, featuring twin turrets, a C-axis, and driven tools. The machine is in very good condition and can be inspected and tested at our facility. Gbodpfx Adoy Hhvtj Ijp The scope of delivery includes 4 driven tool holders. Manufacturer: Mori Seiki Model: NZL 2000/600MC Year of manufacture: 2010 Control: MSX-853IV Technical data: Travel X1, Z1: 225 x 650 mm Travel X2, Z2: 170 x 650 mm Rapid traverse X1, Z1, Z2: 30,000 mm/min Rapid traverse X2: 25,000 mm/min Power chuck: Kitagawa N-08 JAPAN Chuck size: 200 mm Main spindle power: 15/22 kW Max. spindle speed: 5,000 rpm Driven tool spindle power: 3.7/5.5 kW Max. driven tool speed: 10,000 rpm Number of tools, upper turret: 12 (all driven) Number of tools, lower turret: 8 Rated power: 51 kVA Chip conveyor tank capacity: 400 l Total weight: 7,000 kg

Condition: used, Year of construction: 2007, turning length: 530 mm, turning diameter: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, 2-axis CNC lathe Mori Seiki 2050 Dura Turn, Japan Fanuc control! Chuck size: 200 mm / 8 inches Maximum turning diameter: 360 mm Maximum cutting length: 530 mm Bore diameter: 65 mm Spindle power/Maximum spindle speed: 13.5 kW/4000 rpm / 18.1 HP/4000 rpm Spindle type: A2-6 Turret – Number of tools: 12 stations X-axis and speed: 24,000 mm/min / 945 inches/min Z-axis feed rate: 24,000 mm/min / 954 inches/min Included with the machine: -Tailstock -Probe -Part catcher -Chip conveyor Gbjdpfx Adsy Stfdj Isp -Transformer -Documentation Machine weight: 3950 kg

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t Gbsdpfx Adjy Spuue Iop dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Gsdpfxsyhqkzo Ad Isbp Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation and can be added at cost Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Gsdpfx Adjy Rpq Tj Iobp Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: good (used), Year of construction: 2003, Parts shown by hand not come. Gedpfx Asu N H Eqsd Iebp

Condition: used, Year of construction: 1988, turning diameter ca. 570 mm turning length ca. 530-610 mm control FANUC ohne Gewähr x-travel ca 160-200 mm y-travel ca. 560 mm weight of the machine ca. 4,5 - 5 t ca 10 oder 12 spindle bore 52-76 mm weight of the machine ca. 4 t Gjdpfxjyiu Tpo Ad Ijbp

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm Gbjdpfx Adsv N D Rts Iep MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm Gbjdjtt Da Iopfx Ad Iep MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 230 mm, travel distance Z-axis: 520 mm, overall weight: 4,100 kg, number of axes: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Foot pedal included • Automatic bar feeder interface likely installed • Tooling and included holders • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for counter spindle machining • 1x shared output for both spindles • 2x special double boring bar holders (bore Ø20 mm) • Prepared for Schunk TendoTurn DSE hydraulic clamping accessories (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with Ø25 mm and Ø32 mm bores • Accessories for direct mounting of square shank tools on turret • Collet holders • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 • Suitable for BA and BD type collets size 52 • For main and counter spindle use Gedjy N Shlepfx Ad Isbp • Electrical data • Voltage: 200 V • Frequency: 50 Hz • Full load current: 116 A • Spindle motor current rating: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported functional before removal • Available for inspection Additional equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: Seller states compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never worked with this lathe previously • Condition: Reported functional Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1998, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER Gsdpfsyvlx Dsx Ad Isbp X-AXIS TRAVEL: 2000 mm Y-AXIS TRAVEL: 1300 mm Z-AXIS TRAVEL: 1200 mm SPINDLE: 60-6000 rpm; 30-37 kW; ISO 50 - BT PALLET: N.2 ; 1000X1000 mm MAX ADMITTED LOAD: 3000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 120 POS CONTROL UNIT: MSC 502 WEIGHT: 35200 Kg OVERALL DIMENSIONS: 5330 x 7720 x 3810 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; RS 232 SERIAL PORT ; TOOL SETTER NOTE: MAX PIECE DIAMETER 2000 mm; MAX HEIGHT 1550 mm; MAX WEIGTH 3000 Kg

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Gjdjy Nyzgepfx Ad Iebp Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.