Used Lutetia Vacuum Tumbler for sale (3,637)

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Credezz Tm Repfx Ailsh Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Csdjzq Utdopfx Ailjrh Overall width: 1138 mm No of Filter sleeves: 16

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Overall width: 1100 mm Suction capacity: 5750 m3/h Crodpfxjzq Uryj Aileh No of Filter sleeves: 60

Condition: excellent (used), mileage: 344,529 km, power: 265 kW (360.30 HP), first registration: 09/2011, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,300 mm, total width: 2,550 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt combi kolkenzuiger (type: 12.0/2.5 - 320) - Inhoud watertank: 2.500 Liter - Inhoud slibwatertank: 8.000 Liter - Achterwaarts kippende opbouw - Kolkenzuigerarm bovenzijde, links- en rechts verschuifbaar - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening - Vacuumpomp Wiedemann (type: KW 3000), 3.000 m³ per uur - Hogedrukwaterpomp Speck bij 400 bar - Uitschuifbare achterbumper - Opbergkist - Aluminium brandstoftank 330 Liter - Adblue tank 60 Liter = More information = Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Rear axle 1: Lift axle Weights Empty weight: 15.730 kg Carrying capacity: 10.770 kg GVW: 26.500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-LR-51 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Csdpsymqbqefx Ailerh Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 70,497 km, power: 132 kW (179.47 HP), first registration: 12/1991, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro1, total width: 2,450 mm, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 10,000 kg, Year of construction: 1991, General information Cab: single Registration number: VP-61-FH Technical information Number of cylinders: 6 Max. front axle load: 6000 kg Max. rear axle load: 10000 kg Weights Empty weight: 10.930 kg Carrying capacity: 5.170 kg GVW: 16.000 kg Functional Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Crsdjz Avzmjpfx Ailjh If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2014, overall weight: 280 kg, input voltage: 400 V, type of input current: three-phase, power: 3.1 kW (4.21 HP), input frequency: 50 Hz, We offer this used vacuum cleaner from the TECHNOFINISH brand, model ZY8772, manufactured in 2014. TECHNOFINISH ZY6772 AT4/V P industrial filtration system, a high-precision device from the Swiss brand TechnoFinish (ideal for watchmaking, jewelry, polishing, surface treatment, or mechanical workshops). Robust professional equipment, in good overall working condition and well maintained. Technical specifications (according to the nameplate): • Brand: TECHNOFINISH SA • Model: ZY6772 AT4/V PLUS • Year of manufacture: 09/2014 • Power: 3.1 kW • Power supply / Voltage: Three-phase 400V / 3 / 50-60Hz • Weight: 280 kg • Compliance: CE marking Filters and consumables: • Machine sold complete with its filters included (in good condition, not saturated). • Original reference numbers for consumables: Filter 2205031731 / Post-filter 2203015002. Logistics: Csdsz Er Apepfx Ailjrh • Heavy equipment (280 kg), please arrange for a suitable vehicle for collection. • Possibility to view the equipment on site (by appointment). Price: 3200 CHF, negotiable within reason. model: ZY8772 AT4/V PLUS D7391 serial number: 22004130 year of manufacture: 09/2014 voltage: 400/3/50-80 Hz power: 3.1 kW weight: 280 kg If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2014, operating hours: 2,058 h, functionality: fully functional, machine/vehicle number: 103EH00230/02, fuel type: electric, empty load weight: 1,650 kg, total length: 2,200 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,300 mm, Sweeper machine Chassis number: 103EH00230/02 Condition: Ready for use and fully functional Technical condition: good Crjdpfsz D Nknsx Ailsh

Condition: like new (used), ROSSI & CATELLI Vacuum Thermo-Physical Peeler with Feeder – Capacity 60 t/h ROSSI & CATELLI vacuum thermo-physical peeler with a feeder, designed for the continuous industrial peeling of fruits and vegetables through thermal treatment and subsequent vacuum application. This is a very high-capacity system, suitable for up to 60 tons/hour, designed for large processing lines where it is necessary to automate the feeding, thermal treatment, and peeling process while maintaining a continuous flow of product. The system combines a feeder, processing chamber, vacuum system, pipes, valves, and access platforms, forming a complete unit ready to be integrated with the previous and subsequent stages of an industrial line. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Type: Thermo-physical peeler / vacuum peeler -Rated capacity: 60 t/h -Continuous processing system -Feeder included -Surface thermal treatment of the product Crjdpoxp Ri Ssfx Ailjh -Vacuum / decompression system -Industrial process chamber -Continuous feeding and discharge -Process pipes and valves -Associated pumping systems -Construction primarily in stainless steel -Large-format industrial structure -Operation and maintenance platforms -Access stairs and railings -Designed for very high-production lines -Integrable into automatic processing facilities PROCESS The product is received in the lower area and transported via the inclined feeder to the upper feeding section. Next, it enters the processing system, where a controlled thermal treatment of the surface is performed to facilitate the separation of the skin. Subsequently, the product undergoes a rapid pressure change through vacuum, promoting the detachment of the skin from the pulp. After this operation, the product can be sent to subsequent systems for separating and removing the detached skins. It can be integrated with: Receiving and washing systems Conveyors and feeders Peel separators Inspection tables Crushers and mills Graders and refiners Preheaters Evaporators Aseptic sterilizers Aseptic fillers APPLICATIONS Particularly suitable for large processing plants for tomatoes, fruits, and vegetables that need to process high volumes of raw materials continuously. The combination of ROSSI & CATELLI technology, vacuum thermo-physical peeling, automatic feeder, and a rated capacity of 60 t/h makes this unit a particularly interesting solution for high-production industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, Rent Your Vacuum Solution Facing a work peak or a temporary challenge in your operations? From industrial vacuum cleaners to vacuum loaders, available to rent for the long or short term — safe, easy and flexible. Vacuum Loader for Suction and Blowing The DISAB Centurion™ P20 is a flexible vacuum truck with extensive configuration options. It's designed for both suction and blowing of wet and dry materials, working horizontally or vertically, and its powerful absorbency makes it a strong fit across a wide range of industries. Vacuum Unit for Wet and Dry Material The DISAB Centurion™ P20 is built around a permanently mounted engine room housing a vacuum pump powered by the truck's own engine. The vacuum unit adapts to a wide range of applications and is available with numerous options. Its round tank, offered in several sizes, makes it equally suited to wet and dry materials. The unit is trusted by customers across industries including cement, energy, steel, foundry, contracting, and heating plants. Details - Engine: Volvo, 345 kW (469 hp) - Operating mode: Diesel - Delivery terms: FCA - Certificate: CE - Country of manufacture: Sweden - Condition: Unused / Demo unit, 1 operating hour Rental Regions: Blekinge, Dalarna, Gotland, Gävleborg, Halland, Jämtland, Jönköping, Kalmar, Kronoberg, Norrbotten, Skåne, Stockholm City and County, Södermanland, Uppsala, Värmland, Västerbotten, Västernorrland, Västmanland, Västra Götaland, Örebro, Östergötland Rental Details Price per day: Price on request Price per week: Price on request Crsdpfxezy Iyco Ailjh Price per month: Price on request We do not operate in Bolivia, Greece, Hungary, Latvia, Lithuania, Romania, Russia, Serbia, Slovenia, or the United States.

Condition: new, functionality: fully functional, fuel type: electric, color: red, operation weight: 385 kg, fuel: electricity, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: all wheel drive, low noise, TICAB Electric Street Cleaner CITY ANT – Municipal & Urban Cleaning Machine The TICAB CITY ANT is a battery-powered electric street vacuum cleaner and street sweeper for urban cleaning, sidewalk and road maintenance, park and plaza cleaning, airport and industrial surface debris removal. Compact, self-propelled, quiet (~64 dB), and emission-free, it is perfect for municipal services, contractors, cleaning companies, and facility managers. Equipped with a 240 L waste container, 2.5 m suction hose, and powerful hydraulic vacuum system, it removes leaves, gravel, sand, litter, bottles, and cans efficiently. It better works together with our Self-propelled Trolley CITY BEETLE. The TICAB CITY BEETLE is a professional street orderly barrow designed for efficient cleaning of streets, sidewalks, plazas, parks, courtyards, walkways, parking lots, and urban areas. Built for municipal services, facility maintenance, cleaning companies, and construction sites, this battery-powered street sweeper delivers reliable debris collection and outstanding maneuverability without power requirements. Key Features • Mobility: Speed up to 6 km/h for fast cleaning of large areas • Eco-friendliness: Electric trolly for urban maintenance is safe for people and the environment • Safe operation: Street cleaning barrow comes with electromagnetic brakes, optimal tire pressure, IP54 protection Applications • Multi-functionality: Electric street orderly barrow collects and sorts waste, washes away dirt with water • Cost-efficiency: Street cleaning trolley features low energy consumption and minimal maintenance • Street and sidewalk cleaning • Parking lot, promenade, park, and plaza maintenance • Pre event or post event surface clearing • Municipal cleaning and public works • Industrial yard and facility surface cleaning Why Choose TICAB CITY BEETLE Crsdsx Uxiaopfx Aileh The TICAB CITY BEETLE offers simple, reliable, and cost effective sweeping with high debris capacity and robust build quality, making it ideal for cleaning professionals, municipalities, facility operators, and maintenance crews who need an efficient, quiet, and low cost sweeping solution. Contact us now for price, delivery options, and full technical details. Make street cleaning easier with TICAB!

Condition: used, mileage: 106,492 km, power: 235 kW (319.51 HP), first registration: 07/2010, fuel type: diesel, empty load weight: 15,170 kg, maximum load weight: 10,830 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, operating hours: 7,251 h, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, compressed air brake, cruise control, differential lock, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, trailer coupling, * German vehicle * Silt pit cleaner – suction vehicle – flushing system, high-pressure lance, Müller Vacu Liftmaster * Complete documentation available * First owner * Original, only 106,492 km * Condition: see photos * Operating hours: vacuum pump 7,251 / high-pressure pump 7,010 * Suction and pressure unit, tiltable for emptying the sludge chamber * Hose reel with high-pressure cleaner and high-pressure lance at the rear * Container volume 8.5 m³ * Sludge chamber: 7,300 liters * Fresh water tank 700 liters * High-pressure pump URACA P3-08 * Vacuum pump Wittig * Suction hose reel * Hydraulically pivoting boom * Hydraulic crane for lifting manhole covers at the rear * Hose compartments on the right and left * Trailer coupling * Trailer load 24,000 kg * Sliding door on the left and right * Tag axle, steered * Leaf spring air suspension with lift and lower function * Automatic climate control * Auxiliary heater * PARKING BRAKE * Cruise control * Engine brake * Manual transmission * Reversing + side camera * Driver and passenger seat: comfort, air-suspended with seat heating * Electric windows * Electric mirrors * Sunroof * On-board computer * ABS and ASR * All-round warning lights * Wheelbase 3,900 mm * Gross vehicle weight (GVW): 26,000 kg * Unladen weight: 15,170 kg * Payload 10,830 kg * Can be increased to 28,000 kg without technical modifications * If sold to businesses or for export (non-EU and EU), German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer an inspection and assessment of the goods to ensure that the buyer does not have any false impressions regarding the condition and suitability. Inspection and assessments are possible at any time by appointment and are expressly desired. Codpfew R Unisx Ailsrh All information is without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to changes, prior sale, and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, pressure: 5 bar, total width: 1,800 mm, operating pressure: 4 bar, Now offering a new treating plant with a fully automatic door type IWT-Moldrup Timber Impregnation Plant – Ø1,800 × 12,000 mm Industrial pressure impregnation plant for the treatment of timber. The plant will be manufactured following an order and configured to suit the buyer’s treatment process and production requirements. Industrial Timber Impregnation Plant – Ø1,800 × 12,000 mm The plant is built around a pressure vessel measuring Ø1,800 mm in diameter and 12,000 mm in length. The specification can be tailored to the required preservative, timber dimensions, treatment cycles and level of automation. We offer to supply both autoclave alone and complete treating plant incl. pumpskid, storage tank etc. Depending on the agreed scope of supply, the installation can include preservative storage and working tanks, vacuum and pressure pumps, process piping and valves, timber loading equipment, safety systems and PLC-based controls. We can supply the plant with process automation and provide supervision during installation and commissioning, as agreed in the written contract. Credjz Eg Nqopfx Aileh This is an offer for a newly manufactured plant. The equipment shown or described is not an existing plant available for immediate delivery. Final technical specifications, scope of supply, price and delivery time will be confirmed in our quotation. We also offer other diameters and lengths upon request. Please contact us with your treatment requirements for a detailed proposal.

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Crjdpfxey Hl Hpo Ailsh Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: good (used), mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 06/1997, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, gearing type: mechanical, suspension: steel-air, total length: 8,200 mm, total width: 2,500 mm, total height: 3,750 mm, loading space volume: 16 m³, Year of construction: 1997, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sun visor - Toolbox = Additional Information = Front axle: Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf spring Rear axle 1: Twin tires; Differential lock; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Air suspension Credpfxezzz Tre Aileh Number of cylinders: 6 Gross vehicle weight: 26,000 kg Technical condition: good Optical condition: good Please contact Andre, Henri, or Andre for further information.

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  - Filling system: High-vacuum with liquid ring pump - Capping system: 10-head ROPP (PP) closer Cedpjxqhvlofx Ailerh - Capacity: Up to 12,500 bph (0.7 L bottles) - Filling valves: 48 - Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) - Control system: Siemens S7 - Cleaning system: CIP with spray balls - Operating hours: Approx. 14,000 h - Working direction: Right to left - Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) - Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  - Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours - Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system - Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle - Accessories | 2 EURO pallets with format and head components  

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  - Capacity: - 6,000 bph (1.0 l bottles) - 7,000 bph (0.75 l bottles) - Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) - Bottle height: 150–370 mm - Number of filling valves: 36 - Filling principle: Low-pressure vacuum filling Codpfx Aswiu Nloilerh - Running direction: Left to right - Filling valve type: Electropneumatic - Special features: - Programmable bottle parameters with automatic adjustment for bottle height and fill level - Hot filling capable with auto shutdown at temperature deviation - Automatic speed adjustment based on bottle infeed - CO₂ pre-flushing of bottles - Inert gas overlay possible in the filler bowl - Auto fill level control depending on product temperature - Auto wine changeover via CIP tray - CIP dummy bottles and semi-automatic cleaning program - Remote maintenance modem - Complete documentation (spare parts list, wiring diagram) - Central electric fill level adjustment Scope of Delivery  - MBF Fillmatic 36LV Filler - CIP dummy bottles - CIP tray - Tele-Modem - Complete documentation (electrical and spare parts)

Condition: used, Year of construction: 2019, Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data  Crsdpfxexb Unij Ailjh - Filling points: 2 - Filling valve diameter:  mm - Suitable for filling highly viscous media - Fields of application: food, beverage, pharmaceutical and chemical industry

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Csdpfx Aemnkhfjiljrh

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Crsdpfeukkvnsx Ailoh

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Cedpjdwh E Ajfx Ailerh Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Crjdpfx Ajuch Tmjileh

Condition: used, mileage: 237,000 km, power: 300 kW (407.89 HP), first registration: 02/2009, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, electronic stability program (ESP), * Mercedes Benz Actros 4141 suction and pressure tanker * Registered: 02-2009 * EURO 5 Crodpfx Ajzn E Sloileh * EPS with clutch * SPRING / SPRING * Tank body by KOKS * Capacity: 12,000 liters * High-pressure pump * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Year of construction: 2026, condition: used, NEW Automatic loading and unloading station.Suitable for wood, MDF, solid wood, drywall, cement fiberboard, and boards. Examples: Doors, boards, MDF panels, cabinet fronts, drywall, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel Codpfx Aoy Iv N Rjilerh Technical specifications: - Working width 1.300 mm. - Includes belt conveyor, length 3,400 mm - Working height 930 ± 20 mm - PLC control, operated via a touch panel, Siemens S7-1200 - 2-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift the panels 15 mm on one side before vertical movement. - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: infinitely variable up to max. 10 m/min. - Electric motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,500 kg YouTube link:

Year of construction: 1999, condition: excellent (used), functionality: fully functional, SFK-DANFOTECH MA 3000 SD Crodpforzq Dzjx Aileh ID.NO. 2683 SFK-Danfotech mod MA 3000 SD vacuum tumbler / massage tumbler year mod 1999 capacity 3000 liters. Dimensions 330 x 250 cm Height 250 cm.

Condition: used, 1 unit – Model LPHY 60520, with 37 kW electric motor 1 unit – Model Z8220 KK Cjdjzr H R Ropfx Ailjrh