Used Kraussmaffei Twin-Screw Extruder for sale (7,958)

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2 Bedjzmnp Rjpfx Acnjll

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: Blodsyrd U Uopfx Acnol - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: ready for operation (used), Year of construction: 2006, operating hours: 98,495 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, displacement volume: 74 cm³, injection pressure: 2,500 bar, injection weight: 59 g, mold height (min.): 200 mm, ejector force: 22,600 N, ejector stroke: 100 mm, opening stroke: 600 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,910 mm, overall weight: 3,000 kg, heating capacity: 8.12 kW (11.04 HP), pump power: 11,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We offer this used KraussMaffei 50-180 CX injection moulding machine, year 2006. KM Model: 50-180 CX International KM size designation: 180 CX/50 Year of manufacture: 2006 Blsdpfsyf E Dqsx Acnjl Machine serial number: 61009011 Machine weight: 3,000 kg Condition: ready for operation (used) Pump operating hours: 98,495 Automatic cycle hours: 83,046 Description: Screw diameter: 25 mm Clamping force: 500 kN Shot volume: 74 cm³ Maximum injection pressure: 2,500 bar Shot weight: 59 g Minimum mould height: 200 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 600 mm Tie bar spacing: 370 mm Location ring, injection side: Ø125 mm Location ring, ejector side: Ø125 mm Ejector force (forward/backward): 22.6 kN / 9.9 kN Ejector stroke: 100 mm Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Heating capacity: 8.12 kW Pump motor power: 11 kW Power supply: 400V, 50Hz, standard industrial three-phase connection Equipment: documentation included If you have any additional questions or need more information, please send us a message or call us.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT Bodsw U N Ixopfx Acnsll - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), functionality: fully functional, Starlinger Extruder Bodjhgq Ahspfx Acnsll - Single-screw extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter/screen changer - Die installed Data sheet, see photos. Optionally available with water bath & strand granulator, etc. If you have any further questions, please do not hesitate to contact us. Commissioning and testing can be arranged. Available for immediate delivery.

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit Bljdpfx Acjy Apdqenjl \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: good (used), Year of construction: 2005, clamping force: 27,000 kN, Equipment: documentation/manual, KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm MC5 controll Clamping Unit * Clamping force: 27,000 kN / 2,700 t * Mold opening force: 1,890 kN * Moving platen force, opening/closing: 342 / 294 kN * Platen dimensions: 3,020 × 2,600 mm * Distance between tie bars (H × V): 2,100 × 1,700 mm * Opening stroke: 3,000 mm * Mold height min./max.: 900 / 2,000 mm * Maximum daylight: 3,900 mm * Ejector stroke: 400 mm * Ejector force forward/backward: 400 / 200 kN Injection Unit – SP 12000 Screw diameter: 120 mm * L/D ratio: 23 * Maximum injection pressure: 1,758 bar * Stroke volume: 6,786 cm³ * Shot weight PS: 6,175 g * Injection flow rate: 1,118 cm³/s Bedpfx Ajznwt Iocnell * Screw speed nominal/max.: 100 / 141 rpm * Plasticizing rate PS at nominal speed: 169 g/s * Plasticizing rate PE at nominal speed: 131 g/s * Plasticizing rate PS at maximum speed: 239 g/s * Plasticizing rate PE at maximum speed: 184 g/s * Nozzle contact force: 166 kN Electro-Hydraulic Equipment * Pump motor rated power: 132 kW * Installed heating capacity: 84 kW * Barrel heating/control zones: 7 * Dry cycle rate according to Euromap 6: 356 cycles/h * Dry cycle time according to Euromap 6: 10.1 s * Oil tank capacity: 2,440 l Dimensions & Weight * Net weight incl. control cabinet: 168 t * Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m * Maximum mold weight: 72,000 kg With Electric Screw Drive * Screw drive power: 147 kW * Screw speed nominal/max.: 100 / 158 rpm * Plasticizing rate PS nominal: 178 g/s * Plasticizing rate PE nominal: 137 g/s * Plasticizing rate PS maximum: 267 g/s * Plasticizing rate PE maximum: 206 g/s With Accumulator (ZE) Injection flow rate: 1,696 cm³/s Equipment: 4 cores hydraulic - moving platen 16 hydraulic cascades 6 pneumatic cascades Hotrunnrer controllers: 48 removable tie bar Software for Extrusion

Condition: used, Year of construction: 2005, Manufacturer: KRAUSS MAFFEI, Type: 1600-8100-1400MX, Year of manufacture: 2005, Serial No. 61007140, Control system: Krauss Maffei MC5, Clamping force: 1,600 t, 2 injection units, Minimum/maximum mold height: 700/1,600 mm, Platen spacing: 3,400 mm, Clear opening horizontal/vertical: 1,850/1,400 mm, 12 cascades, 48 hot runner nozzles, Core pulls hydr. 5 (DS) 5 (AS), Screw diameter: 105/60 mm, Injection weight: 4,100/600 g, Part removal robot, Manufacturer: Krauss Maffei, Belt conveyor, approx. 5,000 x 1,400 mm Bedpfozn Aqfox Acnjll +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Max. open height: 1050 mm Bledpfx Acozwwyasnjl Min. mold height: 350 mm Opening stroke: 700 mm

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Bledezvm A Ispfx Acnsl Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Blsdjzvmx Nopfx Acnol Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300 Bsdeud H Dmspfx Acnell  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Bedpjzvmpnofx Acnoll Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Blodpfezvmxpsx Acnol Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: ready for operation (used), Year of construction: 2002, clamping force: 40,000 kN, screw diameter: 135 mm, injection weight: 7,837 g, controller manufacturer: KRAUSS MAFFEI, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details. KraussMaffei 4000-24500 MC • Clamping Force: 40,000 kN • Injection Volume: 10,735 cm³ • Shot Weight (PS): 7,837 g • Injection Pressure: 2,276 bar • Screw Diameter: 135 mm • Screw L/D Ratio: 23 • Nozzle Radius: 25 mm • Nozzle Shut-Off: Hydraulic • Nozzle Immersion Depth: 40 mm • Platen Size (H × V): 3,315 × 2,920 mm • Daylight Opening (H × V): 2,240 × 1,800 mm • Minimum Opening Stroke: 2,200 mm • Mold Installation Height: 1,100–2,000 mm • Maximum Opening Width: 4,200 mm • Centering Ring (Fixed Platen): 315 mm • Centering Ring (Moving Platen): 315 mm • Quick Mold Clamping System: QMC 101.450 • Hot Runner Control Zones: 48 • Pneumatic Cascade Control Circuits: 10 Bedjzk E Thspfx Acnell • Hydraulic Cascade Control Circuits: 12 • Core Pull Circuits (Fixed Platen): 3 • Core Pull Circuits (Moving Platen): 4 • Cooling Circuits (Fixed Platen): 18 • Cooling Circuits (Moving Platen): 18 • Temperature Control Units: 36 • Supply Voltage: 400 V • Power Supply: 3-Phase • Frequency: 50 Hz • Motor Current: 622 A • Heater Current: 583 A • Motor Fuse: 630 A • Heater Fuse: 630 A

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg Bledoyrmzqepfx Acnel EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: used, Double edger Pilous DB700M, year of manufacture 2023, as new, including saw blades, 11 kW, approx. 700 kg Bodpfevr I Iusx Acnoll Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Blodpfefh Hahsx Acnel Sales unit 1 Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Blodpfx Ajvkfxhscnel Replacement separator cartridge for the oil separator tank From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Air filter cartridge 6.1997.0 Original Kaeser spare part Suitable for Kaeser compressors: CS 75, 90, 120 Guarantee and warranty are excluded in this advertisement. Blodpfovkfyfsx Acnel Price on request.

Condition: used, Motor, 1FK7060-5AF71-1DU5-Z, 4 available. Motor, 1FK7100-5AF71-1AG0, 2 available. Motor, 1FW3204-1GN72-5CK0-Z, 1 available. Motor, 1FW3204-1GY72-5CK4-Z, 1 available. Motor, 1FW3204-7GN01- 4GY7-Z, 2 available. Display, 2 available. Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 available. Siemens Simodrivo Drives, 6SN1111-0AA00-1FA0, 1 available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 available. Siemens single motor module, 6SL3126-1TE31-3AA3, 1 available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 available. Siemens active line module, 6SL3136-7TE31-2AA1, 2 available. Siemens sinamics sensor module SMC20, 6SL3055-0AA00-5BA1, 6 available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 available. Siemens motor module, 6SL-3126-1TE32-0AA4, 1 available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 available. Bledpfx Asrbzx Recnel Siemens simodrive drives, 6SN1111-0AA00-1FA0, 1 available. Motherboard

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Blsdpfxoixt H Ne Acnsl Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: like new (used), 300 mm intermediate plate for Krauss-Maffei KM 800. Bsdsh Hlr Eepfx Acnsll Original Krauss-Maffei

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Blsdpfx Acoh Nmt Djnsl Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power ! Bedpfxjhy Nnbs Acnjll