Used Kolle Aligner for sale (806)

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Nlodpfewqqv Djx Ag Ieh

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Nsdpfx Agsyxy Sdo Islh Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Nsdpfoxt Sgtox Ag Islh

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double-sided automatic lateral aligner with motor drive 1x Foot switch for START/STOP of the work cycle 1x Set-up for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 hp (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collet 4x Additional collet with single finger 1x Compact Office label printer 1x Cut editor 1x Maestro optiwise - Advanced - N. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German Nledpexlvktsfx Ag Ijh 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) incl. 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). incl. 1 day online training MAESTRO OPTIWISE PRO (as needed) incl. MAESTRO CONNECT 1 year incl. MAESTRO PATTERN IMPORT (255€ free of charge)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR!!! Due to customer insolvency, offered for sale at a reduced price. Location:

Condition: used, functionality: fully functional, machine/vehicle number: 9381, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Chassis number: 9381 Fork width: 100 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Telescopic Njdpfxezv Az He Ag Ijlh Transmission: Hydrostatic Speed class: 40 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Air Front tire condition: 80 - 100% Rear tire type: Air Rear tire condition: 80 - 100% Description: Year of manufacture: 11/2022, Model year: 2023, Drive: hydrostatic with automatic power regulation and Speedshift, electromagnetic direction switch, 2 forward and reverse gears, Tires: AEOLUS 445/65 R22.5 TLAG including puncture protection fluid, Turning radius: 4.22 m. The scope of delivery includes: - 1 tilting fork carrier CAT 1320 with 2 pallet forks, each 1,200 mm - 1 work platform preparation for operating a work platform with control from the basket, including control panel - Machine operation via radio remote control, including radio remote control. Rear work lights, front work lights, heater, air conditioning, CE certificate, exterior mirrors, rotating beacon, LED. Equipment: - complete lighting according to STVZO (German Road Traffic Licensing Regulations) - Automatic attachment recognition - Yellow rotating beacon - Load control system MSS - Interior rear-view mirror - TÜV preparation (German Technical Inspection Association) 20 km/h - LED work lights near the cabin: 2x front, 2x rear - Charger for radio remote control in the cabin - Rear-view camera - automatic leveling of outriggers - automatic wheel alignment - right and left electric exterior mirrors with defrosting - tires with Liquifill.

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Nlsdpfx Ajzv Nrleg Ijh

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K, 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system is ready after completing our full maintenance programm. This machine is therefore ready for a demo! Year of built 2013 6 station base Configuration: Nedezv Ttgspfx Ag Islh Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: good (used), Year of construction: 2009, Edger and panel saw in one machine. Nledpfx Ajz Abpieg Ish Max. cutting length: 6.2 m Max. cutting width: 2.1 m Max. cutting height: 120 mm With alignment laser for the cutting line 2 clamping devices, left and right 6 retractable cross-feed chains in the rear table Saw motor: 11 kW

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data - Direction of operation: RM - Capacity: approx. 2,500 bottles per hour - Speed range: approx. 800 – 3,000 bottles per hour - Labelling technology: Self-adhesive Nsdpeyzc H Nofx Ag Islh - Labelling station: - 1 × self-adhesive labelling unit (HERMA) - Label speed: approx. 40 m/min - Roll diameter: 300 mm - Label height: up to 240 mm - Bottle Formats - Bottle types: Swing-top (bail closure) bottles, other bottles also possible - 500 ml – Ø 66 × 280 mm - 1,000 ml – Ø 85 × 316 mm - Label Data - Label dimensions: approx. 160 × 17 mm - Application type: U-seal label - Electrical Data - Control system: Siemens S7-1200 - Operator panel: Sütron 7” - Power supply: 400 / 230 V - Frequency: 50 Hz - Equipment / Features - Alignment system for swing-top closures  - Bottle orientation system in infeed star - Conveyor height: approx. 1,000 mm - Electrical cabinet lighting - Socket integrated in control cabinet.

Year of construction: 2020, condition: ready for operation (used), spindle motor power: 8,500 W, number of axes: 3, This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine. Additional equipment • Clamp & stripper units for secure work holding • 12 sets of clamps • Position clamp ensures firm fixing during hole processing Machine Benefits Technical Machine Benefits • Travelling type: gantry type • Processing capacity: max. Processing capacity: 4500 × 2000 mm • Max drill bit capacity: carbide drill 50 / taper drill 50 • Hydraulic motor: 3. 7 kw • Provides pressure for position clamps, stripper, and alignment unit • Cutting fluid cooling system Extra Information Control & Interface: CAD file interface with 18 patterns supported Windows-based operating system with USB file upload Machine weight: 12000 kg Njdpfx Agjzvu Rgo Iolh Condition: Machine in excellent condition, with very low working hours.

Condition: new, Year of construction: 2026, The WP500 self-centering three-jaw chuck is a professional clamping component designed for use with welding positioners and welding rotators in industrial environments. Thanks to its wide clamping range and robust construction, it provides fast, safe, and precise clamping of pipes and workpieces with various shapes. It is an ideal solution for facilities requiring high reliability in welding and machining processes. Key Features of the WP500 Chuck Wide clamping range – securely clamps workpieces with diameters from 200 to 500 mm. High clamping force – up to 800 kg, ensuring stability even when clamping heavy and irregular components. Maximum load capacity of 600 kg – designed for handling large components for rotational welding or machining. Self-centering three-jaw mechanism – ensures precise alignment of the workpiece with the rotational axis of the welding positioner. Versatile applications – suitable for clamping pipes, sleeves, square profiles, and hexagonal profiles. Construction and Technology The WP500 chuck has been designed for operation in demanding industrial environments. It features a reinforced mechanical system with three self-centering jaws that move synchronously toward and away from the center axis. The jaws are made of hardened steel, providing high wear resistance and ensuring long service life. The Ø235 mm through-hole allows workpieces such as pipes to pass through the chuck, expanding the technological capabilities of the positioner. Precision and Operating Efficiency The WP500 chuck mechanism enables rapid workpiece clamping while maintaining precise axial alignment. This significantly reduces setup time and improves the repeatability of production processes. Secure clamping directly contributes to the quality of the weld or machining operation by preventing workpiece movement and errors caused by inaccurate positioning. Applications The WP500 chuck is designed for use with welding positioners, welding rotators, and other welding turning devices used in both serial and custom production. It is particularly recommended for welding: Pipes Flanges Tanks Frames Non-standard components requiring precise axial clamping It is ideally suited for heavy industry, structural steel fabrication, power generation, and tank manufacturing. Technical Specifications Specification Value Model WP-500 Nedpjzwmrxefx Ag Iolh Maximum clamping force 800 kg Maximum load capacity 600 kg Through-hole diameter Ø235 mm Clamping range Ø200–500 mm

Condition: used, Alignment and welding plate, made of cast steel – gray cast iron, heavily ribbed formerly used as a scribing and measuring plate Nodpfx Agjzxr Tdj Iolh heavy-duty alignment plate Length: 2000 mm Width: 1000 mm Thickness: 240 mm Working height: 850 mm Plate thickness: approx. 30 mm, continuous - 5 adjustable feet Weight: approx. 1000 kg good surface condition

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Nljdpfx Agezmx Scs Ioh Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! Nedpfx Agozmyfdj Iolh In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: new, neu ca. 6-8 Wochen ab Auftrag Polen 26880 € 513.41 € 1 1 30 mm 60 ° 500-2920 U/min 50 - 150 m/min 3 mm/min 100 mm 7.5 kW 1216 mm 1275 mm 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench Nsdpfx Ageyrhrds Islh swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF Nsdpfxoymf Uro Ag Ijlh ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Nodpeyk Ip Tjfx Ag Islh Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Njdpfew Eqdqjx Ag Iolh Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST Nlodpfoxacfgox Ag Ieh upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min Nljdpfx Agoxak Hxo Ieh - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, Year of construction: 2025, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Nedov Nlbgjpfx Ag Ielh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-210 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Nlsdjv Nldnjpfx Ag Ioh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 160 cycles/minute; filling range: 1-300ml; accuracy: ?±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 2; storage hopper capacity: 70L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 6kW; compressed air: 0.6MPa; machine dimensions: L2870xW1770xH2340 mm. Nledpfx Agov Nld Ij Ieh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, functionality: fully functional, warranty duration: 6 months, KUKA Mastering Set The KUKA mastering set is required for mastering the robot axes during start-up or after maintenance. During mastering, the mechanical position and the electronic position of the robot are aligned. This complete kit can be used for almost all KUKA robots. Article No.: 00-228-862 ✔️ Condition: Brand New ✔️ Warranty: 6 Months Nlsdow U Ud Eopfx Ag Ijh The mastering kit must be checked and verified by KUKA at intervals of 1 year. For more details or quotation, please contact us.

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., Nedpfx Aoxaakgjg Islh but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions