Used Knapp 320Mm Width for sale (28,271)

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Isdpfx Aevrvq Dehyjih Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor Iijdpfxsztpmqs Ahyoh - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 1997, Mikron HAAS VCE1000 vertical machining center Year: 1997 Axis X travel 1016 mm Axis Y travel 508 mm Axis Z travel 635 mm Table width 457 mm Table length 1220 mm Type of CNC HAAS Spindle taper ISO 40 Max. part weight on table 1575 kg ATC Number of tool pockets 20 Max. spindle speed 7500 rpm Machine dimensions length 3530 mm height 2985 mm width 2450 mm weight 5500 kg Accesories/options: - Chip conveyor Iedpfx Ahsz Tlhcjyeih - Through spindle coolant - Prepared for 4.axis ( drive and wiring included ) - Renishaw touch probe - Renishaw TS27 tool measuring In very good condition, coming from a Swiss tool shop.

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm Iiedpfx Aszx Rkzshysh DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller Iiodpfx Aohy Tlrjhyjh working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors Ijdsc S Di Rjpfx Ahyeih magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: Iiedpfx Ahezx Suueyeh - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards Iisdpfxsdcdwbe Ahyoh installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit Iedpfx Ahjyfgzdjysih OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Ijdpfx Asdd Hi Ejhyjih Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Second-hand Weinig Profimat 23 E automatic planing and chamfering machine (for construction timber) for four-sided planing, chamfering and profiling of large-section timber, featuring a chamfering unit, ATS and a long dressing table. Includes a set of Centrolock planing heads, chamfering tools and accessories for cutting (sawing). Illustrative image! Technical data: - Spindle 1: Bottom / 11 kW / 40 mm - Spindle 2: Right / 11 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 11 kW / 40 mm - Spindle 5: Bottom / 7.5 kW / 40 mm Iodpjz Tz N Aefx Ahyjih - Spindles: 5+1 - Working width: 260 mm - Working height: 160 mm - Planing table length: 2,500 mm

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels Iedpjv Dg A Usfx Ahysih precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Iodez Tf D Rspfx Ahyoih Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Year of manufacture: 1987 Colour: Green Empty weight: 700 kg - Year: 1987 - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 Iedezkq Auopfx Ahyjih - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), * Brand: LKoreman Iodeywmcgopfx Ahyjih * Model: permanent magnetic block (unused) * Type: heavy duty * Dim. block: length 1200mm, width 850mm, height 320mm. * On stock: 2 pieces.

Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing. Iedevzt Huopfx Ahyoih

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa Iedpfx Ahoyr Utnsyoih _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, Semi-automatic perfect binder with a production speed of up to 350 books per hour, manufactured in Italy. Automatic cover feeder, automatic book ejector. Easy to set up via touchscreen, without requiring graphic design knowledge. Separate main glue and side glue application. Air supply for cover using suction and blowing air. Specifications: Model: IP-400A Perfect Binder Condition: New Cover Feeder: Suction feed 120-400gsm Missing cover detection: Yes Book ejection from clamp: Automatic Spine width: 2mm-55mm Binding length: 320mm Minimum cover size: 297 x 130mm Ijdpfx Ahoy Tyxyjysih Maximum cover size: 500 x 320mm Book height: 110-270mm Separate spine & side glue tanks: Yes Cycle speed: 320 per hour Production speed: 280 per hour Book preparation: Milling & notching disc Paper dust extractor: Included Electrical requirements: 220-240v 50/60Hz Machine weight: 320kg Dimensions: (L)1750mm x (W)1250mm x (H)1130mm

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Offer without obligations. Duplo DC 616 - year 2019 Specifications Dimensions (L x W x H): 1600mm x 620mm x 1050mm Weight: 150 Kg Power Supply / Consumption: 230V AC, 50Hz / 100W (0.7 Amp) Input Paper Size Min: 210mm wide x 210mm long Input Paper Size Max: 320mm wide x 650mm* long (330.5 x 999mm) Finished Paper Size: Width: 48mm, Length: 50mm (45mm) Paper Weight Min: 110 gsm Paper Weight Max: 350 gsm Iedpfeztnfxjx Ahyoih Paper Curl: Within +/- 3 mm Paper Type: Uncoated paper, coated paper, laminated paper Capacity: 100 mm Type: Top feed / Belt suction - See first pictures (Ask for more detailed pictures !) Price ……… UNDER REQUEST =====

Condition: excellent (used), Cosmec 320 multi-blade saw Iisdpozi Dyqofx Ahyjh Track width 320mm, Max cutting height 120mm, Max saw blade diameter 350mm, Manual vertical adjustment of the saw arbor, Electric adjustment of the clamping devices, Engine power 22KW, 2 feed speeds + stepless adjustment, Automatic track lubrication, Machine in good working order, very good condition.

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Iisdpfxezrhhwo Ahyeh

Year of construction: 1993, condition: ready for operation (used), A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115mm, max. back-side machining speed: 5600rpm, back-side machining torque: 18Nm, drilling/thread cutting station clamping range: 1mm-16mm, max. Q-axis working stroke: 25mm, max. drilling spindle speed: approx. 3500rpm, max. thread cutting spindle speed: approx. 1000rpm, weight: 3200kg, machine dimensions: approx. 2500mm/1120mm/1620mm. Inspection by appointment possible. Iiedpfx Ahjzipg Neyeh

Condition: ready for operation (used), Year of construction: 2001, A double-sided labeling machine Herma is available. Product length range: 25mm-110mm, product width range: 25mm-80mm, product height range: 50mm-320mm, labeling capacity: approx. 200products/min, machine dimensions X/Y/Z: approx. 3200mm/1350mm/2700mm. Documentation available. An on-site inspection is possible. Iiodjy Ey T Ijpfx Ahyjh

Condition: as good as new (ex-display), Hans Schreiner metal lathe, P1000 Digital 3-jaw chuck 315mm, 4-jaw faceplate 320mm, clamping disc 430mm, driving disc 250mm, steady rest, travelling steady rest, magnetic brake, switchable automatically and with foot operation, coolant system, halogen lamp, splash guard, chip tray can be pulled out to the front, fixed punch, roller punch Mk5, removable bed, hardened and ground bed and gear wheels without oil filling incl. Multifix Set B and 3-axis digital display Iiodpfevrvu Njx Ahyjh Technical data: Center height 250 mm Center width 1000 mm max. turning diameter 500 mm spindle mount Camlock 8 hollow spindle 80 mm tailstock taper MK5 spindle speed 24 to 1600 rpm Speeds 15 Main motor output 5.5 kW Max. diameter over cross slide 300 mm Max. turning diameter in the bridge 630 mm Longitudinal feed 0.07 - 4 mm/revolution Cross feed 0.02 - 1.35 mm/revolution Metric thread 0.5 - 28 mm pitch Inch thread 56 - 1 threads/inch Module thread module 0.5 - 3.5 Thread diametric pitch 56 - 8 Quill diameter/travel 65/120 mm Weight 1700 kg

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, bed width: 550 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 14 rpm, overall weight: 7,670 kg, Centre lathe Trens - SUI 80 CLASSIC MACH-ID 8974 Make: Trens Type: SUI 80 CLASSIC Year: 2018 HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE-Chuck cover for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck .... Steady rest Ø   30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Iijdpfxjvn Svuj Ahyeh Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400Rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!