Used Kilia 65 Liter Meister Plus Vario Kutter for sale (17,850)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Fedpjwc Rk Esfx Alxjph Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls Fpedpfx Aswc Ri Iolxeh 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Fpsdswc Afhjpfx Alxjh Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Year of construction: 2015, condition: used, Year of manufacture: Mar 2015 Fpsdpfx Aleypb Hioxsh New: No 5 stuks gebruikte trailerbanden 385/65 R 22.5 7/8/9 mm.

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Fpjdpfx Ajyl Nntslxsh

Condition: used, Manufacturer: Kilia Type: Grinders Mincer Mixer Height: 1500 mm Width: 1000 mm Length: 1100 mm Voltage: 400V 50Hz 3N Power: 11/15 kW Fpodjt Up I Djpfx Alxeh Throat Diameter: 130 mm Main material: Stainlees Steel

Condition: like new (used), Cutter Manufacturer: Kilia Stainless steel Fsdpfjxrtyxox Alxoph Capacity of the bowl: 50 liters 6 knives

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (via phone). Holp VarioBucket / VL.112.700 / OQ65 / HARDOX / Wear Plates / NEW / in stock & immediately available Price: €6,430.00 net / €7,651.70 gross - Excavator class: 14 to 25 tons - Own weight approx.: 570 kg - SAE capacity: 700 liters - Ditch slope angle: 54° - Ditch bottom radius: 150 mm - Including wear plates - The bucket is manufactured entirely from HARDOX steel. Advantages of the Holp VarioBucket: - Large working surfaces - Robust construction with high-quality materials - Minimal weight due to optimized triangular design - Rounded sole - Two work openings - Rectangular work opening - V-shaped - The VarioBucket impresses with its high performance and clean operation. The V-shaped opening allows for precise pouring and delivers very high trench clearing performance in drag operation. Where greater speed and flexibility are required for a variety of tasks, the VarioBucket is a true asset on the construction site: faster, more adaptable, and safer. Numerous other Holp products are also in stock and available immediately! Fjdpfxeyhyl Es Alxeph Please contact us at / . Financing options available upon request. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Errors and prior sale excepted. = More information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Tobias Ebert for further information.

Year of construction: 2002, condition: used, Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of fuel oil and diesel . Nominal capacity 50 cbm piece 1 used but overhauled, that means the tank is cleaned, refurbished, primed and painted Color equipment lacquer RAL ; however, you can also bring in your own color wishes at any time. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece1 venting spigot Piece1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank dimensions length approx . 8.220 mm diameter approx. 2.900 mm Weight approx. 8.000 kg Storage above ground Of course you can also design your tank system! All our installations are checked and inspected in our company by selected employees. extensively controlled and checked. We offer an inexpensive delivery on request additionally. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are in all sizes and are available for sale on our premises. All our tanks can be offered without diesel pump. Top in the offer . Liquid fuel - AHL tanks in the size of 10.000-100.000 liters. Water tank Loeschwassertank in the offer . Price/ Shipping The price for the tank station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. Fpedpfx Aec Nkx Ujlxeh With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), Vacuubrand chemistry diaphragm pump Here we offer a Vacuubrand chemistry diaphragm pump. VACUUBRAND VARIO chemistry diaphragm pump MV 10C EX VARIO Technical data: Max. Pumping speed 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temp., lower limit, operation, in °C 10°C Ambient temp., upper limit, operation, in °C 40°C Ambient temp., lower limit, storage, in °C -10°C Ambient temp., upper limit, storage, in °C 60°C Max. Max. outlet pressure absolute in bar 1.1 bar Connection on suction side Small flange KF DN 25 Connection on pressure side Small flange KF DN 16 Nominal power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension B in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU-PURE®) 42 dBA Fodpfx Aloq Suwmexeph EX approval Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, external chamber with inert gas purging: II 2G Ex h IIB T4 Gb X, Outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency Voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Fsdpfx Alev N Hc Ejxsph Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill Fodpfx Asb A Rb Hslxoph -Three-knife -Diameter: 17.75 mm -Usable length: 150 mm -Recording: MK2 -Type: HSSE Quantity: 19 pieces -Sale: only complete set -Weight: 6 kg

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Fpedjhzcabepfx Alxoh Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Condition: used, Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Fpodpfx Alsiqpc Aoxjh Width: 150 Length: 150 Height: 180

Condition: used, 145,000 liter stainless steel tank Diameter: 4.95 m Fsdpoxrtcmefx Alxsph Tank height: 7.60 m Height of the steel structure under the tank: 80 cm Total height: 8.40 m The tank has a flat bottom and is mounted on an 80 cm high steel structure.

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Fpjdpfx Alexv Ayvsxoh Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Fjdpfx Aljxn T S Hsxsph Forklift available for loading

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Fjdpfx Aleza Alhsxeph Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Fpsdpfx Aljq Npqmjxeh Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Fodpezc Hviefx Alxjph Technical specifications: Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. Fodpjzc Hpisfx Alxjph If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Fsdpfx Alezc D Enoxeph Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Fpjderw Arzspfx Alxeh Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor 4th axis ready

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i Fpodpfjywhhksx Alxoh - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: used, Year of construction: 2020, Standard 70 kg payload multipurpose robot Fpedpfx Aszbgmljlxeh This innovative series of lightweight robots features a slim wrist, rigid arm and small footprint. Offering best payload and inertia in its category, this powerful 6-axis model is suitable for various applications and combines a 70 kg payload with extremely high axis speeds.