Used König Classic Rex Combiline 800 for sale (9,577)

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Hjdpfx Afjzzk Tbj Seu Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: good (used), 1) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B1) Application: Long cut circular saw Note: little used, top condition Technical description: ● Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 2) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 3) Used carbide circular saw blade for sawing aluminum Article: 80040160 TFZ neg (GEBR-B3) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 800 mm ● Mounting hole 40 mm ● Teeth 160 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 6 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 2.8 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 4) Used carbide circular saw blade for sawing aluminum Article: 99040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 990 mm ● Mounting hole 40 mm Hodpfxjtzwtbs Af Ssu ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 3.7 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm

Condition: used, Year of construction: 1969, functionality: unexamined, For sale is a robust, heavy-duty lathe from Yamazaki / Mazak, model Rex 610 × 1500 (centre distance 1500 mm, swing over bed 610 mm). Ideal for machining large and long workpieces. The machine is in condition commensurate with its age. It has not been tested and is sold as is. Hedpfxsxyv Alj Af Seu Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialised in both Mazak machines and other brands. We place great emphasis on personalised support and are happy to assist you at any time even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All details without guarantee.

Condition: new, planing width: 800 mm, Electric table lift, two motor speeds 1/6 mm/s Automatic adjustment of the table to the specified position Feed table – length 1200 mm 1 grooved roller at the inlet 2 feed rollers at the outlet Automatic star/delta motor start Electromagnetic brake Electronically controlled continuous adjustment of the feed belt speed 4 – 19 m/min 4-knife planing roller, Ø 150 mm Segmented pressure segments at the inlet, pressure bar at the outlet 4-point table mounting Workpiece thickness 3 - 300 mm Dust extraction nozzle with outlet, Ø 180 mm Knife setting gauge Noise protection Standard packaging in PE film Hedpfx Asittnpjf Ssu Machine built according to CE electrical and safety standards Optional equipment: Motor 20 hp (15 kW) Segmented grooved feed roller Two relief rollers in the table Two rubber-coated outlet feed rollers Milling roller, type "Tersa" - available from stock in Haldensleben

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Hjdpfx Aozz Sg Njf Seu Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 History Number of owners: 5 Condition General condition: good Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Hjdpfozzwa Iex Af Sju Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: used, Year of construction: 2001, Seed station Kemper 800 mm Year of manufacture: 2001 Condition: refurbished Suitable for integration into production lines with a working width of up to 800 mm Standalone machine with its own control cabinet Adjustable spreading rate Adjustable spreading duration Return conveyor for unused seed Extendable mesh belt Humidification and seeding can be switched off Pressure rollers at the inlet and outlet with adjustable pressure height Hsdpfx Asz A Skuof Seu Turning station after humidification Includes 1x spreading container and 1x extendable mesh belt

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, total length: 3,800 mm, total width: 1,850 mm, total height: 2,150 mm, overall weight: 5,000 kg, Equipment: documentation/manual, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Hedpfxez Azdto Af Seu Levelling elements BDE interface

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Hjdpfxoz A Tgke Af Seu Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 252158, total length: 8,700 mm, total width: 1,400 mm, type of input current: AC, input voltage: 400 V, overall weight: 1,450 kg, Full functional. 5,3kW Digital angle-meters (which are add-on). Full operating documentation and electrical schemas. Hodpsz Dbwaofx Af Ssu Available to see at work on site.

Condition: excellent (used), mileage: 445,875 km, power: 316 kW (429.64 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,710 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, total length: 8,860 mm, total width: 2,550 mm, Year of construction: 2006, = Additional options and accessories = - PTO - Tipping hydraulics Hjdjzattpspfx Af Sou = Remarks = Crane Number of hydraulic extensions: 11 Remote control: ✓ Winch: ✓ Meter capacity: 30 m Capacity kilo: 6200 kg WMAH39ZZ06M443804 = More information = Technical information Number of cylinders: 6 Engine capacity: 10.518 cc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 24.621 kg Carrying capacity: 11.379 kg GVW: 36.000 kg Functional Crane: HIAB 800 E-6 JIB 170 X-5, year of manufacture 2006, behind the cab Condition Technical condition: very good Visual appearance: very good Identification Registration number: BB-416-V = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2010, condition: used, machine/vehicle number: 15604095, Used Bongard BFC 600x800 professional proofing cabinet, designed for bakeries, pastry shops, and laboratories seeking a reliable solution for controlled proofing and fermentation management. Capacity suitable for 600x800 mm trolleys: this model allows the use of 2 trolleys in the 600 x 800 mm format, ideal for organizing a regular production cycle in a bakery. Proofing function with integrated heating: heating power of 2 kW, providing stable and uniform proofing for bread dough and viennoiseries. Cold management / controlled fermentation: 2.32 kW cooling with R404A refrigerant, allowing for fermentation delay and better production organization. Hsdpfxszyryye Af Sju Professional power supply: 400 V three-phase – 50 Hz – 6 A connection, with a connected electrical power of 2.20 kW. Robust and well-regarded model: proofing cabinet from Bongard, a renowned manufacturer of professional bakery equipment. Technical identification: model BFC 600x800, plate reference 4CE12CH 4PC, serial number 15604095. Year of manufacture: 2010. Ambient operating temperature: up to 32 °C. Condition: used equipment, available according to the condition visible in the photos and on the technical label. Recommended applications: proofing of breads, viennoiseries, leavened doughs, and fermentation management in artisan bakeries or professional laboratories.

Condition: like new (used), Year of construction: 2015, operating hours: 14,717 h, functionality: fully functional, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, workpiece weight (max.): 7 kg, total height: 2,247 mm, total length: 2,890 mm, total width: 5,193 mm, overall weight: 7,800 kg, CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Hodpfx Aoxdlynsf Seu Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 48 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pressure bar: 8 / 20 Equipment Chip conveyor Blowing air through spindle center selectable via M-function Signal lamp Tool measuring arm Workarea light Coolant gun Internal coolant supply Interface for Bar feeder Paper band filter Working time hours Under power: 36.049 Cutting Time: 14.171 Basic machine dimensions / weight Length mm: 2.890 Width mm: 5.193 Height mm: 2.247 Weight kg: 7.800

Condition: used, Mechanic’s lathe EKS - WICO Kassel, type DL 350 Vintage lathe for exhibition Machine no. DL 350/4/50, year of manufacture approx. 1930 Distance between centers 500 mm Swinging diameter over bed 240 mm Height of centers over bed 120 mm Swinging diameter over cross slide 160 mm Height of centers over cross slide 80 mm Spindle bore 16 mm Tailstock taper MK 2 Motor power 2.6 kW Mains connection 380 volts, 50 Hz - suitable as a restoration or exhibition model Hjdpfx Afjzvyvuo Ssu - spindle speed via belt stages - 4-jaw chuck Ø 110 mm with stepped jaws Space requirement L x W x H 1100 x 800 x 400 mm Weight 150 kg in good condition

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 39,150 m³/h, overall weight: 2,720 kg, nominal flow rate: 39,150 m³/h, negative pressure: 6,250 Pa, nominal power: 90 kW (122.37 HP), rotational speed (max.): 1,325 rpm, Various fans from Polytechnik are for sale: 1. A450-45.0-G5 20kW 2. A450-45.0-T1 20kW 3. A450-45.0-T2 20kW 4. A450-45.0-G7 22kW 5. A500-45.0-G3 24kW Hjdpfxju Udibj Af Seu 6. A560-45.0-G2 30kW 7. A710-45.0-G4 60kW 8. A800-45.0-G6 80kW

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U Hodezxlwcjpfx Af Sju spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *

Condition: new, functionality: fully functional, gearing type: other, color: green, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB RA 800 | Small Asphalt Plant & Recycler – Asphalt Production Equipment The TICAB RA 800 Asphalt Recycler is a professional mini asphalt plant designed for hot mix asphalt production, asphalt recycling, pothole repair, crack filling, road resurfacing, patching, and pavement maintenance. This versatile unit reuses reclaimed asphalt pavement (RAP) to produce high-quality hot mix asphalt directly on-site, saving materials, energy, and costs. Ideal for municipalities, contractors, industrial sites, highways, parking lots, and urban road maintenance projects. Key Features: • Mini asphalt plant & asphalt recycler RA 800 for on-site hot mix asphalt production and RAP recycling • Compact, mobile, and easy to operate on construction sites, municipal roads, highways, parking areas, driveways, bike paths, and industrial pavements • Supports bitumen emulsion, tack coat, and recycled asphalt pavement (RAP) • Diesel-fired heating system with precise temperature control for consistent hot mix quality • Durable, robust construction for long-term heavy-duty use • Designed for road contractors, paving companies, municipalities, and civil engineering works • Output capacity: up to 800 kg/h for medium-scale repairs Applications: • Road repair, pothole patching, crack filling, and resurfacing • Asphalt recycling and RAP processing • Hot mix asphalt production and transport • Municipal streets, highways, parking lots, driveways, and industrial surfaces Why Choose TICAB RA 800: Compact, reliable, and versatile, the RA 800 is the perfect choice for all asphalt repair, resurfacing, and pavement maintenance projects. The TICAB RA 800 Asphalt Recycler combines mini asphalt plant capability with on-site recycling efficiency, allowing contractors and municipalities to produce high-quality hot mix asphalt, reduce material costs, and maintain durable road surfaces. Hjdpfx Asx U S Hljf Sju Contact us now for price, delivery options, and full technical specifications. Start producing and recycling asphalt efficiently today!

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, first registration: 05/2000, loading space length: 8,000 mm, loading space width: 2,550 mm, total length: 9,410 mm, total width: 2,550 mm, total height: 900 mm, suspension: air, tire size: 215/75 R 17.5, wheelbase: 5,500 mm, color: other, Year of construction: 2000, = Additional options and accessories = - Hardwood floor - Ron Holes = Remarks = New MOT 4 x New Brake Linings 2 x New Brake Drums 2 x New Brake Boosters 4 x Oil seal 4 x ABS Sensor Lubricate Euro 3,400.- Repaired! Perfect condition!!! = More information = Axle configuration Tyre size: 215/75 R 17.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 8000 kg Rear axle 2: Max. axle load: 8000 kg Weights Empty weight: 4.120 kg Carrying capacity: 11.880 kg Hedpfxjzzyrys Af Ssu GVW: 16.000 kg Functional Height of cargo floor: 90 cm Maintenance, history and condition APK (MOT): tested until 09/2027 Technical condition: very good Visual appearance: very good Identification Registration number: WY-79-JD = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hedpfx Aoxy Tmnjf Ssu

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Hodpfx Afezw Nq Ds Sou Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: like new (used), Year of construction: 2020, machine/vehicle number: CL5058002, functionality: fully functional, operating hours: 9,000 h, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, oil tank capacity: 800 l, overall weight: 800 kg, Equipment: CE marking, Specifications of the MULLER Combiloop CL5-800 150 high-pressure unit and filtration system, 800L/27L, 150 bars: - 800L capacity with level sensor - Centrifugal pump for supplying dirty fluid - Self-adjusting HP Eco+ pump, 150 bar/27L/min (5.5kW) - 8 controllable outputs, including one output for counter-spindle rinsing - 1 low-pressure pump with constant flow rate, 100L/min, 5 bar (1.2kW) - 1 low-pressure pump with constant flow rate, 80L/min, 3.5 bar (1.9kW) - Automatic 40μ filtration with automatic control and clogging detection - Complete high and low-pressure filtration - Pressure control for the part program - Whole oil (recommended viscosity for machining: 15-22 mm²/s; for deep drilling: 5-8 mm²/s) Hodpfjzhi Nnsx Af Sou - Includes: EURO COLD RCFO 95t cooling unit - Excellent condition (very little use)

Condition: excellent (used), Year of construction: 2011, 424 USED König Bun Line: Bun production: Hamburger, hot dog, Kaiser roll, double cut, cut, elongated. Grain sprinkling on both sides. The line has been inspected and serviced by Koenig. TECHNICAL DATA: - Weight: 30-120 g. Hedpfjzifmrex Af Sju EXTERNAL DIMENSIONS (in cm): - Length: 1500, - Height: 450, - Width: 200. EQUIPMENT: - Tipping device - Rex Indistrie divider - Pre-proofer - Labeling - Kaiser roll - Module for baguettes, hot dogs, and hamburgers. - Sprinkling with seeds (double-sided) - Arranging on 60x100 or 60x80 baking sheets. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: good (used), Note: This is a used steel locker. Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Hsdpfowaa D Aox Af Sou Material color: gray Door color: gray Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 7,500 mm Number of bays per racking row: 03 units, each 2,400 mm Number of levels including base level: 02 units Included in the scope of delivery: 04x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal bracing, Hjdpfjkr Uzbjx Af Ssu Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 12x Pallet racking crossbeams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per pair of crossbeams: 1,600 kg, with evenly distributed load 06x Chipboard, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated (possibly in two parts) 48x Z-brackets for locking/inserting chipboard, surface galvanized Suitable for chipboard flooring from 22 - 38mm, can be rotated and inserted on both sides For a width of 40 mm 24x Locking pins, new Design: fully galvanized For securing the longitudinal beams to prevent accidental lifting 16x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Technical specifications for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of racking bays: 01 unit Length per racking bay: approx. 9,975 mm Number of bays per racking bay: 04 units, each 2,400 mm Number of levels including the base level: 02 units Included in the scope of supply: 05x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.0 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Hedpjktbp Dsfx Af Sou Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 32x Locking pins, new Design: fully galvanized For securing the longitudinal supports against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 10x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer, and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope.