Used Ips Pc-2500-Scbp for sale (10,531)

Condition: used, pressing force: 250 t, Mechanical high-performance stamping press for series production of stamped and formed parts. Manufacturer: Müller Weingarten AG Pressing force: 2500 kN Drive type: mechanical Stroke: 160 mm Strokes per minute: 20–80 min⁻¹ Redpfx Aeyyb U Aja Dot Table size: 1000 x 1600 mm Strip width: 30–500 mm Max. coil diameter: 1800 mm Parts produced per day: 43,000 Number of parts: 50 Number of progressive dies: 50 Tool change time: 30 min Shift occupancy: 4 Total weight: 64 t Single weight G1: 48.5 t Single weight G2: 5.2 t Single weight G3: 2.3 t Single weight G4 without coil: 6.5 t Single weight G5 without coil: 1.5 t Machine motor power: approx. 77 kW Total connected load of system: approx. 183 kW Static foundation load: approx. 62 t Dynamic ram load: 85 kN Dynamic cutting impact: 125 kN

Condition: not inspected (used), Year of construction: 2020, operating hours: 4,809 h, functionality: unexamined, operating pressure: 2,500 bar, overall weight: 2,030 kg, rotational speed (min.): 650 rpm, rotational speed (max.): 1,800 rpm, water tank capacity: 80 l, TECHNICAL DETAILS Working pressure: 600 - 2,500 bar Rsdpoyx Uwujfx Aa Djt Flow rate: 9 - 26 l/min Drive power: 160 kW / 132 kW motor Speed range: 650 - 1,800 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,240 x 1,550 x 1,780 mm Total weight: 2,030 kg Input voltage: 400 V Power connection: 400 V / 50 Hz Fuse protection: 250 A Operating pressure water inlet: 2.0 - 8.0 bar Max. inlet temperature: +40 °C Water tank capacity: 80 l Pump speed range: 220 - 610 rpm Engine oil capacity: 10 l Noise level: 75 dB Operating hours: 4,809 h EQUIPMENT High-pressure pump with frequency converter (continuous operation 24 h/day) Standard accessories

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm Redpfx Ajyx Inasa Dst capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale Redsyx Daxepfx Aa Dst PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Rodpfx Aeyf E Tfja Dot Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Rsdpfx Aasyzxcge Dst Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: used, Year of construction: 2022, operating hours: 700 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm * Overall width (minimum): 1,280 mm (990 mm) * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) * Tool kit * CE conformity * Cab with heater * 1x standard hydraulic circuit (with pedal) Rodpfxorwvvys Aa Djt * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 Rodpfx Aajyztays Dot - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: used, mileage: 242,000 km, power: 250 kW (339.91 HP), fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,980 mm, total width: 2,550 mm, loading space length: 7,980 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, Year of manufacture: 2019 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle 1: Double wheels; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Empty weight: 12.018 kg Carrying capacity: 15.982 kg GVW: 28.000 kg Tail lift: Zepro, slider lift, 2500 kg = Additional options and accessories = - Alarmsystem - Aluminium fuel tank Redpfsyztatjx Aa Dot - Camerasystem 360° - Hardwood floor - Heated driver's seat - Heavy duty engine brake - LED lighting cargo area - Lock diff - Outside temperature display - Radio/CD player - Rear air suspension - Reversing camera - Roof and side spoiler - Visor

Condition: used, axle configuration: 2 axles, total length: 9,640 mm, total width: 2,600 mm, wheelbase: 5,940 mm, color: white, Year of construction: 2021, Equipment: tail-lift, Year of manufacture: 2021 Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Empty weight: 8.090 kg Carrying capacity: 21.910 kg Rjdpfxjyzqrge Aa Djt GVW: 30.000 kg Tail lift: Dhollandia, tail lift, 2503 kg Price: On request As new, Low hours 2 Compartments 1st compartment 82 cm wide 2nd compartment 162 cm wide

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min Redpfjyxpv Sox Aa Det Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower 1m Barfeeder magazine IRCO High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: good (used), Progressing cavity pump Seepex BN 5-12 Commission number 220635 Getriebebau NORD SK 25F-100L/4 TF No. 11065491 Motor: NORD SK 100L/4 TF 35012070 No. NM2408306063.00 Progressing cavity pump Seepex BN 15, 2003 Commission number 157877 Seepex geared motor RF63/2 Motor: Motovario T90L4 Rjdoyzcquepfx Aa Det With stainless steel internal components. Serviced in 2010 when decommissioned, fitted with new internals including stator and rotor. Not used since. Stored in warm, dry storage.

Condition: used, Year of construction: 2015, Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Rodpfx Aasyw Twko Det Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton Standard configuration Moving bolster extending forwardsCutting impact bumper dampingSIEMENS S7-300 controller

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Redpfx Ajw Ag T Aja Det Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Condition: new, Year of construction: 2026, 0400 mm 246 mm Rjdpfxjxcyxco Aa Djt 1250 mm 195 mm 54 mm 7,5 kW

Condition: new, Year of construction: 2026, 0330 mm 210 mm 1000 mm 167 mm 40 mm Rsdpfxowp Tq Ue Aa Dot 2,2 kW

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: KLW Lutz, workbench / solid worktop with base cabinets -Worktop: 2500/700/H850 mm -2x drawer cabinet: 2 drawers, layout/height see photos -Transport dimensions: 2500/700/H855 mm -Weight: 152 kg Redpfxeywundj Aa Dst

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning length: 705 mm, turning diameter: 366 mm, spindle motor power: 18 W, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe Paper band filter Working time hours Under power: 23.501 Cutting Time: 7.494 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360 Rsdpfx Aajywtwws Dst

Condition: new, DEMAG brake ring / brake lining / cone brake lining – 50 pieces (new). 1. Type: KB 160 – 4 pcs. 2. Type: KB 100 – 2 pcs. 3. Type: KB 200 – 2 pcs. 4. Type: KB 140 – 2 pcs. 5. Type: KB 125 – 5 pcs. 6. Type: KB 112 – 1 pc. 7. Type: KB 90 – 2 pcs. 8. Type: KB 80 – 11 pcs. Rodsyy Takspfx Aa Det 9. Type: No. 405 – 1 pc. 10. Type: No. 616 654 – 5 pcs. 11. Type: No. 620 606 – 7 pcs. 12. Type: No. 612 648 44 – 6 pcs. 13. Type: No. 628 626 44 – 2 pcs. DEMAG brake hood / brake cover – 38 pieces. Various sizes (new / used).

Condition: good (used), power: 11 kW (14.96 HP), fuel type: diesel, Year of construction: 2018, operating hours: 2,031 h, Drivetrain Drive: Track Make of engine: Komatsu Weights Empty weight: 1.770 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: N345 Rodpfx Asynrltea Djt Other information Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H) ca.: 3,52m / 1,00 m / 2,32m Additional information Please contact Tobias Mayr for more information = Additional options and accessories = - V ditch bucket

Condition: new, functionality: fully functional, machine/vehicle number: diverse, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 120 kg, total length: 1,622 mm, drive type: Lithium-Ionen, construction width: 685 mm, Low-lift pallet truck Rsdpfx Aaoyng Ezs Dot Chassis number: Various Load centre distance: 600 mm Fork width: 160 mm Fork thickness: 58 mm Condition: New machine Technical condition: New Front tyres type: Polyurethane Front tyres size: 140 x 55 mm Front tyres condition: New Rear tyres type: Polyurethane Rear tyres size: 80 x 93 mm Rear tyres condition: New Battery voltage: 48V Battery capacity: 10Ah Battery manufacturer: Hyster Battery type: Lithium-ion Battery year: 2026 Battery condition: New Description: Compact and lightweight design, lateral load support rollers, electric drive, electric lifting and lowering, key-operated controls, travel possible with tiller in vertical position for maximum efficiency in confined areas, emergency direction-reverse switch, ergonomic multifunction tiller with LCD display for maximum operating hours, hour meter, and onboard diagnostics.

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm Rsdpeyvvt Sofx Aa Djt control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1996, - Brand : Omme - Type: 2500 EBDZ - Year built: 1996 - Weight: 2880 kg. - Hours: 587 hours - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Drive plates 4 x - Dutch license plate - second owner - Safety inspection possible - Aerial work platform book available - Maintenance history dealer present - CE document available Rsdsyy Dmbjpfx Aa Dot - Trade-in and transport possible - Video on our website * Brand: around *Type: 2500 EBDZ * Construction year: 1996 * Weight: 2880 kg. * Lateral reach: 12.7 meters * Working height: 25 meters * Hours: 587 uur

Condition: like new (used), Article description: Rodpfxsyyyade Aa Djt 22 pcs. unused hydraulic motors M+S Hydraulic MT/B 315C/4 ----- Item condition: Unused stock item. Storage marks possible. Internal number: 26.310

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/2021, loading space length: 13,610 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, total length: 13,980 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,770 mm, color: white, Year of construction: 2021, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 8.500 kg Carrying capacity: 21.500 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR.30, tail lift, 2500 kg Make of bodywork: Kassbohrer Plywood Box Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Rjdpeyyu A Hsfx Aa Dot Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL