Used Inject Star Tumbler 2200 Liter for sale (10,406)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary Ijdjwc Rk Eepfx Aqueau

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar Iodpjwc Ri Iofx Aqueau TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, turning length: 80 mm, spindle speed (max.): 7,000 rpm, bar diameter (max.): 32 mm, controller model: Fanuc Serie 32i-B, TECHNICAL DETAILS Maximum bar diameter: 32 mm Maximum turning length: 80 mm Main spindle speed: 7,000 rpm C-axis (main spindle): 0.001° Maximum counter spindle diameter: 32 mm Counter spindle speed: 7,000 rpm Tool capacity: 23 tools MACHINE DETAILS Control system: Fanuc Series 32i-B Number of axes: 7 Operating hours: 16,000 h EQUIPMENT Coolant pump with increased delivery capacity Parts conveyor belt Mayfran chip conveyor Service kit with emulsion package Bar feeder FMB Turbo 3-36/3200 / A Emulsion coolant unit Accessories for short lathe subframe Note: The seller can offer disassembly and loading for €2,000. Iodpfxoyh Azpj Aqusau

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Iodjwc Afhopfx Aqusau Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Iedpexvbbfsfx Aqujau Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Iajdpfx Aoycp Nljqusu Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Iaodpfjx U Tchox Aquou Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: new, Year of construction: 2024, Boring and inserting machines Rilesa Vlg 2200 new 2023 Make: Riles Model: Vlg 2200 Description: Condition: new Year: 2023 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: Iodpfx Aqjgbpmhoujau OWN RECEIPT Category: Machine Tools equipment in Poland Subcategory: Drills Subcategory 2: Drilling machines Description DRILL DRILL WITH STORAGE 8 DRILLING UNITS TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 BACKS Year: 2023 new

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h Iedpfx Aqsx U Af Seuoau EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Ijdpfx Aqjxmurrjueau

Condition: excellent (used), Guide rail - support rail for shafts, rails -Type: 1050-620-00 -Holes: 6.5 mm Iaedpfxeb A N Rxs Aqusu -Holes spaced 100 mm -Price: per piece -Quantity: 6 pieces available -Dimensions: 600x50xH23 mm -Weight: 1 kg/piece

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm Iaodpfxsfngxbs Aqusu -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Year of construction: 2002, condition: used, Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of fuel oil and diesel . Nominal capacity 50 cbm piece 1 used but overhauled, that means the tank is cleaned, refurbished, primed and painted Color equipment lacquer RAL ; however, you can also bring in your own color wishes at any time. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece1 venting spigot Piece1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank dimensions length approx . 8.220 mm diameter approx. 2.900 mm Weight approx. 8.000 kg Storage above ground Of course you can also design your tank system! Iaedoc Nkx Uepfx Aquju All our installations are checked and inspected in our company by selected employees. extensively controlled and checked. We offer an inexpensive delivery on request additionally. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are in all sizes and are available for sale on our premises. All our tanks can be offered without diesel pump. Top in the offer . Liquid fuel - AHL tanks in the size of 10.000-100.000 liters. Water tank Loeschwassertank in the offer . Price/ Shipping The price for the tank station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, Long lathe with a maximum of 29 tools to optimize machine efficiency for complex parts. The XIII series is equipped with a counter tool system that contains a maximum of 14 driven tools for high productivity when machining complex parts. The use of guide bushes allows longer parts to be turned, while machines without guide bushes are ideal for machining short parts and cold drawn material. - Max. Machining diameter: 20/32/38/45 mm - Max. Machining length: 270/120 mm - Axles: 11 SA20XIII - Max. Machining diameter: 20 - Max. Machining length: 270 mm - Axles: 11 SA32XIII - Max. Machining diameter: 32 - Max. Machining length: 270 - Axles: 11 SA38XIII Isdpfx Aeg Ncd Tsqujau - Max. Machining diameter: 38 - Max. Machining length: 270 - Axles: 11 SA45XII - Max. Machining diameter: 45 - Max. Machining length: 120 - Axles: 11

Condition: new, Year of construction: 2026, Hybrid long lathe with 6 axes for demanding turned parts! Cross machining on the back with face machining and turning operations for efficient machining. Powerful cutting, precise machining with removable guide bush system. - Max. Machining diameter: 20/26/32/38 mm - Max. Machining length: 250/160 mm - Axes: 7/8 (Y2 axis) - Tools: max. 27 SA20PII - Max. Machining diameter: 20 - Max. Machining length: 250 mm - axes: 7 - Tools: 23 SA26PII - Max. Machining diameter: 20 - Max. Machining length: 190 N: 60 - Axes: 7 + Y1 - Tools: 27 SA26PII - Max. Machining diameter: 26 - Max. Machining length: 250 - axes: 7 - Tools: 20 SA26PYII - Max. Machining diameter: 26 - Max. Machining length: 190 N: 60 - Axes: 7 + Y1 - Tools: 25 SA32PII - Max. Machining diameter: 32 - Max. Machining length: 250 - axes: 7 - Tools: 20 SA32PYII - Max. Machining diameter: 32 - Max. Machining length: 190 N: 80 - Axes: 7 + Y1 - Tools: 25 SA38PII - Max. Machining diameter: 38 Iaedpfxeg Ncc Se Aqusu - Max. Machining length: 250 - axes: 7 - Tools: 19 SA38PYII - Max. Machining diameter: 38 - Max. Machining length: 190 N: 80 - Axes: 7 + Y1 - Tools: 24

Condition: new, Year of construction: 2026, Ultra precision machining system - With up to 33 tools for demanding machining. Thanks to the optional B-axis, various angular machining operations such as drilling, tapping and milling are possible. - Max. Machining diameter: 20/26/32/45/51 mm - Max. Machining length: 270/120 mm - axes: 8 - Tools: max. 29 SA20XII - Max. Machining diameter: 20 - Max. Machining length: 270 mm - axes: 8 - Tools: max. 29 SA26XII - Max. Machining diameter: 26 - Max. Machining length: 270 mm - axes: 8 - Tools: max. 29 SA32XII - Max. Machining diameter: 32 - Max. Machining length: 270 mm - axes: 8 - Tools: max. 29 SA45XII - Max. Machining diameter: 45 - Max. Machining length: 120 mm - axes: 8 - Tools: max. 24 SA51XII - Max. Machining diameter: 45 Iajdog Ncb Ropfx Aqusu - Max. Machining length: 120 mm - axes: 8 - Tools: max. 24

Condition: new, Year of construction: 2026, Optimized for high productivity with an impressive price-performance ratio. Optimal structure design for high accuracy and minimal processing time. Swiss-type automatic lathe for turning, cross milling, deburring, thread cutting, cross milling and cross drilling. - Max. Machining diameter: 12/20/32 mm - Max. Machining length: 160/210 mm - axes: 7 - Tools: max. 22 SA12B - Max. Machining diameter: 12mm - Max. Machining length: 160mm - axes: 7 - Total number of tools: 18 SA20B - Max. Machining diameter: 20mm - Max. Machining length: 210mm - axes: 7 - Total number of tools: 22 SA32B - Max. Machining diameter: 32mm - Max. Machining length: 210mm - axes: 7 - Total number of tools: 20 Iasdpfsg Ncawox Aquju

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: Fanuc Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub-spindle! TECHNICAL DETAILS Machining Data Bar diameter: max. 16 mm Turning length: max. 205 mm Spindle speed: max. 6,000 rpm Number of axes: 5 Control Control manufacturer: FANUC Control model: Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Iaodpfx Aqsw Eb Hceueu Sub-spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 (bar length: 3,200 mm) Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0624, turning diameter: 20 mm, rotational speed (max.): 6,000 rpm, controller model: FANUC Series 18i-T, spindle stroke: 205 mm, number of axes: 7, CNC Swiss-type lathe with seven machining axes! TECHNICAL DETAILS Machining Data Iaedpjw Uilqefx Aqusu Turning diameter: 20 mm Spindle head stroke: 205 mm Spindle speed: max. 6,000 rpm Number of axes: 7 Bar length: 3,200 mm Control: FANUC Series 18i-T EQUIPMENT Main spindle with 4 axes (X/Z/Y/C) Sub-spindle with 3 axes (X/Z/C) 14 tool stations 5 driven tool positions Small parts extraction device Bar feeder: FMB Type Turbo 3-26 Operator terminal Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! A similar machine was recently auctioned successfully! TECHNICAL DETAILS Iaodpjw Uip Aefx Aquou Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control system: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder magazine: FMB Minimag 18 Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3085, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining Data Maximum bar diameter: 16 mm Maximum turning length: 205 mm Maximum spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,650 kg Iedpfx Aqsw Echnouoau EQUIPMENT Main spindle Sub spindle 8 tool positions for side machining 2x 4 tool positions for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 Coolant system: oil

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1673, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC sliding headstock automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Isdpfx Aow Uim Iequeau Weight: 1,600 kg EQUIPMENT Main spindle Sub spindle 8 tool stations for side machining 2x 4 tool stations for back and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 3200 A

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Isdpfjv N Hc Eox Aqueau Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 76,296 h, functionality: fully functional, machine/vehicle number: 330_030901, turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, controller model: CNC Fanuc 18i Tb, TECHNICAL DETAILS Machining diameter: max. 32 mm Maximum workpiece length: 125 mm Spindle travel: 310 mm Spindle speeds: 350 – 7,000 rpm C-axis: 1° Number of axes: 7 Drilling capacity with fixed tool diameter: 13 mm Drilling capacity with rotating tool diameter: 8 mm Iaedpfx Aqoxp Ngveuou Thread tapping: M12 (with driven tool up to M6) Milling capacity: 10 mm MACHINE DETAILS Control unit: CNC Fanuc 18i Tb Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,512 x 1,700 mm Machine weight: 2,900 kg Bar feeder dimensions (L x W x H): 4,500 x 1,000 x 1,800 mm Bar feeder weight: approx. 1,800 kg Peripheral & accessory dimensions: approx. 1,900 x 700 x 800 mm Peripheral & accessory weight: approx. 200 kg Coolant used by the machine: Oil Operating hours: 76,296 h EQUIPMENT FMB TURBO 5-42 bar feeder (bar capacity 5-42 mm) MAYFRAN hinged belt conveyor Kraft und Bauer fire extinguishing system CO2 fire extinguishing cylinder (10 kg) Operating and maintenance manual Operating tools

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,000 h, functionality: fully functional, spindle diameter: 32 mm, Equipment: bar feeder, chip conveyor, CNC Swiss-type lathe with comprehensive equipment! Main spindle diameter: 32 mm Iedpfsxc I Apex Aquoau MACHINE DETAILS Operating hours: 18,000 EQUIPMENT Synchronously driven guide bushing C-axis on main and sub-spindle Workpiece conveyor belt Collet sleeve main spindle: F37 (673-53) Collet sleeve sub-spindle: F37 (673-73) 3-spindle cross drilling unit 4-position tool holder 16x16 mm Sub-spindle (32 mm sub-spindle capacity) Parts blower to the front Parts ejector Parts ejection safety device Cut-off tool breakage safety device Separate coolant tank with level and flow monitoring Automatic central lubrication unit with oil level monitoring Leveling bolts and plates Toolbox FMB Turbo 3-26 bar feeder, year of manufacture: RS232C interface for bar feeder Fire extinguishing system Kraft & Bauer / GUT Feuerschutz Mayfran chip conveyor