Used Index Ms32 Multispindle for sale (1,365)

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Nedpfoxdttpox Ag Rewn Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm Nedoz Nx Rcopfx Ag Rewn • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) Nwedjz N Hdwspfx Ag Ren - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, controller manufacturer: KUKA, controller model: KRC4, laser type: fiber laser, laser source model: TruDisk 4001, type of cooling: water, Equipment: cooling unit, documentation/manual, dust extraction, safety light barrier, - Trumpf TruLaser Weld 5000 - 2021/2022 Year Model - Advanced "turnkey" robotic welding cell - 6-axis industrial robot arm - Enclosed safety housing - Multi-weld techniques & Intelligent Assist System to detect workpiece placement - AI Welding Robot - Serial No. 1422667 - Robot Gantry / Linear Unit KUKA KL 4000 - Serial No. 153080 - Two Axis Workpiece Positioner Model DKP-400 V5 -Serial No. 154987 - TruDisk 4001 - High-power solid-state disk laser source - Serial No. L5211E3364 - Technotrans Fluid/Water Chiller System Model RL 16/0 SK V2 NEC Grav MIZ 1" - Serial No. 40000135731 - KUKA Robot Controller KRC4 -Serial No. 3121117 Nodpfxezy T Tzs Ag Rjwn - Rittal TopTherm Blue E Wall-mounted cooling system - Serial No. 2021K000144111 - Camfil Air Pollution Control Dust Extraction System - Model MF 8-8 A2 Serial No. 10011175 - Two Station Index Rotary Positioner - Equipment available after project completion, available from October 2026 - Within the machine price: Machine operational software comes with the machine - Available at additional costs: Programming solution software available - Other opportunities at additional cost: Extensive Research data library available for weld parameters including some structurally tested and certified parameters. Operator & programmer training available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Njdpfx Ajy Ipp Rjg Rewn Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Nwsdpfx Aju S Rivog Ron Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Nwedpezqt Umefx Ag Rjn Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, machine/vehicle number: 65333, Equipment: type plate available, Rotary indexing machine No. 171 Coil winding machine Blume & Redecker 8 stations, double flyer, max. wire diameter: 2 x 1 mm No. 170 Coil winding machine Blume & Redecker 8 stations, single flyer, max. wire diameter: 1.4 mm Njdpfx Agoylx Tls Rjwn

Condition: new, 32 mm Nedsyv Npgjpfx Ag Rown bore stroke 125 mm Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 150-2.500 UpM Power requirement 16 A total power requirement 1,5 kW Overall size 750x450x1745 mm weight of the machine ca. 187 kg Standard equipment: - Stepless speed adjustment - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg Njdpfxsz Rmq To Ag Rown X-axis travel: 710 mm Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Nsdpoxpfkksfx Ag Rewn Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° Nwsdpfx Agju Idgco Ron control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) - smooth-running, low-noise, low-wear and almost maintenance-free Nwsdpfjz R Ri Ijx Ag Rsn   - 780 punching strokes per minute - Optimum use of sheet metal - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - does not include the loading unit shown in the picture

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT Nwsdpfoy I Dixex Ag Ren - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer

Condition: new, mileage: 100 km, power: 137 kW (186.27 HP), color: red, gearing type: automatic, loading space length: 61,500 mm, loading space width: 25,500 mm, loading space height: 26,000 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Iveco Eurocargo ML75E19/P 4x2 box van with tail lift. ZF 8AP800 automatic gearbox, emission standard EURO VI E, engine speed 2200, parameter 2350, steel rims, speed limiter 90 km/h, tires 225/75R17.5, manually operated cab tilting mechanism, front headlights halogen, standard cab in flat-roof design, cab rear wall without window, towing and recovery eye front, fog lights, chassis frame in grey, rearview mirrors for body width 2600 mm, first aid kit, plastic bumpers, cab components in black, sun visor transparent, installed on the outside of the cab roof, model year 2024, windshield unheated, IVECO logo gunmetal grey, exterior mirrors electrically adjustable and heated, flat roof painted in cab color, electronic immobilizer and 2nd vehicle key, clothes rail on cab rear wall including adjustable hook, preparation for toll system (OBU), including antenna and wiring on the dashboard without receiver, rear axle ratio: 3.58, COC certificate of conformity, sunblind for side window, driver and passenger side, armrest right on driver's seat, adjustable in inclination, driver's seat luxury, air-suspended, heated, multi-adjustable, armrest right (not for Eurocargo), lumbar support and headrest, with integrated 3-point safety belt, storage compartment on engine tunnel in 2-seat configuration, foldable, cab interior lining with fabric cover, air conditioning with manual control, plastic steering wheel with function buttons for radio, telephone, cruise control and menu navigation, VIN: manufacturer index ZCF, digital tachograph 4.1, passenger seat comfort, 4-way adjustable, air-suspended, integrated headrest and integrated 3-point safety belt, electrical preparation for loading area light, batteries 143 Ah, recommended for tail lift and auxiliary drive operation, exhaust pipe centrally under the vehicle, air suspension on rear axle, parabolic spring on front axle, total weight 7,490 kg (weight variant, front axle: 3,600 kg / rear axle: 5,200 kg), air filter unit under cab, electrical preparation for tail lift operation according to VEHH standard, wheel chocks, 2 pieces, air compressor 360 ccm, recommended for trailer operation with continuous braking system, signs for air tank standard, generator 2880 watts (24 volts x 120 amps), left-hand drive for right-hand traffic, air tank in aluminum design, number depends on suspension version and trailer version, design temperate climate, design standard, vehicle badge standard, engine intake air heater for optimal cold start behavior at extreme temperatures, NOISE ECE 51/03, weight variant front axle: 3,600 kg /, rear axle: 5,200 kg, raw air intake without snorkel, jack, air dryer for braking system, heated, C-profile steel ladder frame, chassis protection coating Tectyl 300 G Clear, type plate 75E, position of components on the chassis in standard design, omission of underrun protection at the rear, heater for AdBlue tank, rear cross member, D-value: 70 kN, not suitable for central axle trailers (except 75 E), fuel tank 120 liters, plastic, lockable, fuel pre-filter on frame, heated, AdBlue tank, 30 liters, transmission mode standard, connectivity box 4G incl. TCO service contract, radio with Bluetooth, DAB+ and 7-inch display, tire pressure monitoring system (TPMS) sensors. Nwsdpfoy Svrmox Ag Rsn

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears Nedpsz Sm Hrjfx Ag Rjwn • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: used, mileage: 628,277 km, power: 390 kW (530.25 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 10/2027, color: black, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, FAT XF 530 SSC DEEP BLACK (46185) Riedler timber bunk Penz timber crane 15Z9.50 H1/B4 Grapple with chainsaw Central locking Electrical connection for trailer, 24 V/15-pin Rear axle 1: 315/80R22.5 Front mirrors Idle shutdown system, 5 minutes Rear: 2 x 13.00 t, air suspension, SR1360T Auxiliary heater with waste heat recovery and timer Basic immobilizer Traction control system (TCS) Rear suspension 26.0 t/brakes 26.0 t Rear axle 2: 315/80R22.5 Spring brake cylinders, first front axle Driven rear axle with disc brakes Interior trim color: Dark Sand Interior decoration: Piano Black Co-driver's seat: Basic Luxury speaker system with 6 speakers Compressed air tank made of steel Adaptive cruise control with FCW and AEBS Electronic stability control (ESC) Armrest, driver's seat Glass sunroof, electric operation Lane change warning system Power windows Pollen filter Mechanical differential lock LED daytime running lights Universal FMS connection Driver Performance Assistant Upper bunk Exterior sun visor, green, translucent Cab air-suspended MX-13 engine, 390 kW/530 hp, cab emblem: 530 Reversing warning system Cab - Super Space Cab MX engine brake and ZF Intarder Accessory power supply 12V/20A, 24V/2x15A+2x40A Rear axle ratio 3.40 LED headlights Rear light with LEDs Front axle 1: 385/65R22.5 16-speed manual transmission 16S25.. OD, 13.80-0.84 Emission class Euro 6 Front: 9.00 t, parabolic, normal, 183N Second transmission PTO NL/1b-Z Wheelbase 5.55 m / rear overhang 3.75 m Spring brake cylinders on rear axle 1 and 2 First transmission PTO N.../10c-O-37/30 Cool box or refrigerator Skylights Xtra Comfort mattress, lower bunk Automatic cab climate control AdBlue tank 75 liters, left chassis side Truck telephone ECAS remote control with extended functions Navigation preparation Driver's seat: Luxury Air Analog body signals and warnings Front axle 1, 9000 kg, load index 160 Axle load monitoring Steering wheel, leather, color black CAN J1939 functions in body connection Lower bunk with drawer 65 liters Nwodpfe Adwzbox Ag Rsn Antennas: AM/FM, 2x GSM, GPS. Extra: CB Fog lights and cornering/turning lights R1,315/80R22.5 R2,315/80R22.5 SP,315/80R22.5 F1,385/65R22.5 Tank 750 L left 2 revolving beacons on light bar 4 roof spotlights Hella Bycool compressor, auxiliary air conditioning, rear mounting Light-Fix bracket SSC E6 Switch in cab for continuous power to reversing lights (truck) Steering axle locking switch (trailer) Lift axle switch (trailer) Compressed air gun with mounting in cab CB radio, 40 channels XXL storage table XF Euro6 Marlen

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Equipment: * ETD white * 16t distribution vehicle, extended day cab * Mechanically reinforced cab suspension * Sleeper cab * Central locking, 3 keys, 2 remote controls * Exterior sun visor, green, translucent * Fog lights and cornering/turning lights * Rear view camera with preparation for a 2nd camera * Halogen headlights * Daytime running lights * Green tinted windows * Mirror mounts, body width 2.50 - 2.60 m * Headlight beam pattern for right-hand traffic * Adjustable, high roof spoiler (set) * Side deflectors, long (set) * ETD white * Headlight surrounds and bumpers: cab color * Roof spoiler color: cab color * Side deflector color: cab color * Protection, lower crossmember, frame crossmember, and fender in cab color * Chassis color: anthracite grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver's seat: Air-suspended luxury driver's seat * Auxiliary heater Air Top 2000 * Lower sleeper bunk, standard height * Curtains * Driver's seat armrest * ECAS remote control * Soft-grip steering wheel, color: black * Passenger seat: fixed, velour * Air conditioning * Digital tachograph, VDO version G2V2A * Speed limiter, 90 km/h * FMS connection, prepared * Adaptive Cruise Control with FCW and AEBS-3 * Preparation for toll system * PACCAR Connect 10-year subscription * Antennas: AM/FM + GSM + GPS * FM/DAB/DAB+ radio with speakers including telephone connection * Driver Performance Assistant * Rear warning system with self-adjusting volume * Manual main switch * Lane change warning system * Electronic Stability Program (VSC) * Hill start assist * DAF Side and Turn Assist * DAF Drowsiness detection and distraction detection * Rear axle: 10.50 t, air suspension, SR10.15 * Front axle: 6.00 t, parabolic, 60N * Front axle 1, 6,000 kg, load capacity index 146 * Rear axle 1, 10,500 kg, load capacity index 142 * Wheel trims, silver-grey * Goodyear * Tire pressure monitoring system * Front axle(s): 285/70R19.5 * Driven rear axle(s): 285/70R19.5 * Steel wheels, silver-grey * F1, 285/70R19.5GO KMAXS2 146/144 L Steering CCA 3P * R1, 285/70R19.5GO KMAXD2 146/144 L Traction CCA 3P * Rear axle ratio 4.63 * Mechanical differential lock * 8-speed PowerLine 8AP1200 economy gear, 4.89-0.64 * Engine PX-7, 212 kW/287 hp. Cab emblem: 290 * Emission class Euro 6 * Traction control system (ASR) * Normal transport, full version * Idle shutdown, 5 minutes * Automatic transmission PowerLine, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase 5.60 m / rear overhang 2.40 m * AdBlue® tank 55 l, right chassis side * One wheel chock * Fuel tank, aluminum, 340 l * Front underrun protection * Standard component layout Njdpe Ad S Tlofx Ag Rjwn * Fuel tank, left * Splash guard * AdBlue® tank filler neck without lock * Battery box, left, no spare wheel holder * Longitudinal member 270/6.0 mm, without internal reinforcement * EAS unit, left, discharge to the right and rear, white * Operation with drawbar, nameplate, up to max. GVW * Pneumatic connection for trailer, fifth wheel coupling * Cross member D85-Dc70-V25, coupling D85 A, mounted * Electrical connection for trailer + EBS, 24V/2x7-pole * Body mounting, BAM 1, loose brackets * Standard chassis preparation * Body functions * Body connector on the chassis * Side marker lights * Tail lift application * Generator 100 A, batteries 2 x 175 Ah * Air intake, above, behind the cab * Maximum ambient temperature 38 degrees * Cold climate * Water separator, heated * Plus warranty, powertrain, 3 years

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of Manufacture: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Nodpfjt Rg E Sox Ag Rewn Rapid traverse rate: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 seconds Repeatability: + / - 1 second Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 seconds Collet clamping time: 7 seconds Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Workpiece end display with warning light Magazine for 30 tools Operating hour display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm 191026ä

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Njdpfxjzyu R Ue Ag Rjwn Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and closing machine - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Machine prepared for hot-air sealing of plastic tubes - Electrical connection for hot-air sealing head available - Hot-air sealing head currently not included / not available - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. The machine is prepared for the installation of a hot-air sealing system for plastic tubes, including the corresponding electrical connection. However, the required hot-air sealing head is currently not available with the machine. CYCRON is presently in contact with AXOMATIC in Italy to clarify the availability of the original hot-air sealing head or a suitable replacement, as well as further technical documentation, spare parts, and the possibilities for completing the machine for plastic tube processing. CONDITION Used machine in very good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. Exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available on request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun E21, stroke length: 150 mm, throat depth: 320 mm, overall weight: 9,800 kg, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, input voltage: 400 V, pressing force: 125 t, table length: 32,000 mm, table width: 2,650 mm, type of input current: three-phase, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. Nwodpfx Aozlpaneg Ron The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, Equipment: documentation/manual, Asquith Butler 3000 Bed Type Milling Machine, Siemens Sinumeric 840C CNC Control, Auto Indexing Head, (Live 5 Nwsdpfx Aew A Aiaog Rjn Axis orthogonal head) ,3.1 x 1.2m Table, Travels x-3m,y-1000,z-1050. New 1995.

Condition: new, power: 427 kW (580.56 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, - Braking system - Available in multiple versions!!! POWERTRAIN Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h CAB EXTERIOR Roof hatch, electric version, transparent for MLL high roof Front grille design Standard black Manual cab tilting mechanism Mirror cams Cover for AS FHS in body color / For AT/AD in black Cab rear wall without window Front underrun protection for chassis with a gross vehicle weight greater than 7,490 kg First aid kit Plastic bumper AS cab, high roof Nwodpfs Aavc Aox Ag Rjn Windshield, non-heated Cab roof insulation, standard CAB INTERIOR Sun visor for side window, driver's side Dashboard design: plastic with black trim COC Certificate of Conformity INSTRUMENT CLUSTER 10 INCHES Passenger seat, static CHASSIS Weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor 2-cylinder, 630 ccm, with integrated clutch, on-demand controlled Smart generator 2880 W (24V x 120A), on-demand controlled Parabolic spring on the front axle Batteries in frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Signs for air tank, standard Rear shock absorbers Design for moderate climate Chassis frame in gray Trailer brake, standard Battery charging interface Stabilizer bar, front, exhaust pipe end, to the left Air filter unit under the cab Frame setting, standard Ride height, standard MAIN FEATURES Trailer, 2-circuit brake Fifth wheel coupling dimension EG Trailer socket for 24-volt operation, 15-pole Rear axle ratio: i = 2.31 Frame overhang, rear, 1047 mm FUEL EFFICIENCY & CONNECTIVITY Transmission mode, standard Preparation for toll system (OBU) ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), internal sensors 4 DIN slots, storage compartment on top VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0 Infotainment, 10" TFT display Transmission software ECO-Roll (free-wheeling function) GPS cruise control Hi-Cruise Adaptive cruise control (ACC) SAFETY Advanced driver distraction warning system Warning triangle, design and dimensions according to ECE-27 Standard catwalk behind the cab Hill holder (hill start assist), for comfortable starting on inclines Electronic stability program (ESP) Rear view monitoring system with camera Blind spot monitoring system (BSIS), right Intelligent speed assistant (ISA) Side marker lights, forward monitoring (MOIS) Autonomous emergency braking system (AEBS) Preparation for alcohol interlock (ALC) with cable OTHER CEE type plates NOISE ECE 51/03 Vehicle width, standard EU VIN code, digital CAMBIO 12TX 2860 TD VIN: Manufacturer index ZCF With radiator conveyor Smart storage compartment on top CHASSIS Electro-hydraulic power steering Air reservoir in aluminum version, quantity depending on suspension version and trailer version.

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Nwjdpfj Aawrlex Ag Rsn Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Technical details: Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 Nwjdpfx Aj Aawvwsg Rjn If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.