Used Imatec Fu-145 for sale (3,983)

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11.10.2022 Basic Equipment / Technical Data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm - Max. outreach: 3,800 mm - Length to implement carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR-catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic travel drive - Pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral-based hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap safety belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 electronic joystick with capacitive release incl. direction control switch - CS = hydropneumatic cab suspension Boom: - 2-piece telescopic boom with electronic end position damping, Soft Stop - Implement carrier quick coupler system type "ZM2", hydraulically controlled from the cab Steering: - Hydraulic steering - 3 steering modes: All-wheel, front-wheel, crab steer - Permanent all-wheel drive - Axles: fixed front axle, oscillating rear axle Brakes: - Power-assisted disc brakes on all four drive shafts - Parking brake automatically engages when engine is off Chassis: - High-strength steel frame construction Hydraulics: - Load Sensing variable displacement pump - Work hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min Dedpfetu Sztox Akcjcg - Working pressure: 250 bar - Flow-sharing control block Electrics: - 12 V - 100 Ah battery - 120 A alternator Stabilization Control: - Simplified Merlo ASCS System (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition, and overload cut-off Tires: - 460/70 R 24 Michelin XMCL Standard Equipment: - Power brakes - Hydraulic oil cooler - Rear plate for mounting a trailer hitch - Hydraulic reversing fan - Radio prep - Work lights on cab (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Load guard on implement carrier - Road lighting - Automatic main battery switch - Electrical cable in boom - Audible reverse signal - Lift cylinder support for securing Optional Equipment: - EU approval as tractor/towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. connection for trailer lighting (for compact and medium models, height-adjustable version strongly recommended) - Air conditioning - Boom suspension (B.S.S.) - LED beacon on cab roof (approval subject to ...

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Dcedpsynt Ucjfx Akcog Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 241, travel distance X-axis: 4,000 mm, Tekna TK 145/20 CNC twin head mitre saw. Dodpfx Akexrg Suecjcg Cutting lenght: 4000mm Blade 500mm

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications Dsdpfetziudox Akcocg This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Dedjgixvwopfx Akcjcg Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 1,800 h, mileage: 30,000 km, load capacity: 200 kg, lifting height: 14,700 mm, TRUCK MOUNTED PLATFORM Multitel ALU 145 Year 2020 Installed on Mitsubishi Fuso Working height 14,7 m Horizontal outreach 7,7 m Basket capacity 200 kg Dsdpfsyudutox Akcjcg Hours 1.800 km 30.000 All working No oil leaks

Condition: used, mileage: 88,727 km, power: 106 kW (144.12 HP), first registration: 02/2023, fuel type: diesel, overall weight: 1,102 kg, color: grey, gearing type: mechanical, Permissible total weight: 1102 kg Dedpfjyt Uawjx Akcscg

Condition: new, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, table length: 1,600 mm, table width: 500 mm, Fully operational, heavy-duty FU series milling machines equipped with infinitely variable feed speed control on all 3 axes, including rapid traverse mode, and a 3-axis digital display. The FU line features a multi-universal milling head with 360-degree rotation. Electrical components supplied by the renowned Schneider Electric. ISO 50 spindle taper, table size 1600x500 mm. Equipped with a class-leading SERVO axis feed drive. Key Features: - Infinitely variable feed speed adjustment on all 3 axes, with rapid traverse in all axes - Universal milling head with patented "HURON" system, adjustable at any angle - Swiveling control panel with ergonomically arranged switches - Heavy-duty, solid cast iron construction ensuring vibration-free operation - All guideways are hardened and ground - Precision ball screws on all axes for enhanced machining accuracy - Centralized lubrication system - Automatic table feed for X, Y, Z axes, including rapid feed for all axes - Large, robust T-slotted table designed for maximum loads - 3-axis digital display ensures maximum work efficiency - Safety guards complying with the latest CE standards - Quiet operation due to ground and hardened gears in the oil-bath gearbox - State-of-the-art axis feed technology - High performance maintained even under heavy load - Precision and dynamics on par with modern CNC machines - Greatly reduced backlash for exceptional accuracy - Integral actuator characteristics, delivering a theoretically zero static error - Thanks to feedback, the servo drive can detect overload or positional errors. Upon such detection, the controller immediately halts all machine axes. Technical Specifications: - Table size (width): 1600 mm - Table size (depth): 500 mm - Spindle taper: ISO 50 - Spindle speed range: 30 – 2050 rpm - Number of spindle speeds / Infinitely variable: 27 - Travel X-axis: 1200 mm - Travel Y-axis: 700 mm - Travel Z-axis: 500 mm - Spindle to table distance: 50 – 550 mm - Spindle to column min.: 28 mm - Spindle to column max.: 728 mm - Max. table load: 1800 kg - Automatic feed X-axis: 10 – 1000 mm/min - Automatic feed Y-axis: 10 – 1000 mm/min - Automatic feed Z-axis: 5 – 500 mm/min - Rapid traverse X, Y, Z: 2200 / 2200 / 1100 mm/min - T-slots (quantity, size, spacing): 5 / 18 / 80 mm - Motor power: 7.5 kW - Dimensions (width): 2200 mm - Dimensions (depth): 2285 mm - Dimensions (height): 2100 mm - Weight approx.: 4500 kg Scope of Delivery: - LED work lighting - Cooling system - Centralized lubrication - Table feed for X, Y, Z axes - Coolant tray - 3-axis digital display - Adjustable guards with modern safety features - Service tools - Servo drive - Legally required safety guards - Complete DTR technical documentation (Polish) - CE certificate Dcjdsytffqjpfx Akcsg - 24-month comprehensive warranty at no additional cost

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Dedpfx Akeylnpiececg Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,650 h, load capacity: 4,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,400 mm, power: 107 kW (145.48 HP), fork length: 1,200 mm, empty load weight: 8,400 kg, total length: 5,370 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Load center: 500 Mast type: telescopic Speed class: 40 Technical condition: normal Front tire type: pneumatic Front tire size: 460/70 R 24 Front tire condition: 80–100% Rear tire type: pneumatic Rear tire size: 460/70 R 24 Rear tire condition: 80–100% Djdpfjyldtksx Akcjcg 3rd valve, air conditioning, Compressed air system

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Dcsdjyhdvkopfx Akcog T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Dcedpfxeyg H Hio Akcjg Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Dcjdpfxoxdltbe Akceg Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper Djdjxur Hiepfx Akcecg (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: Djdjymmtcjpfx Akcecg The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Dcodpfxjygud Ao Akcjg Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: good (used), functionality: fully functional, Technical data (according to nameplate): • Manufacturer: Heckert Werkzeugmaschinen GmbH • Model: FU 315 • Year of manufacture: 1997 Dsdpfxjymd Ide Akcscg • Machine no.: 19019 • Temperature range: +5 to +35 °C • Total weight: approx. 3.1 t • Made in Germany Equipment / Features: • Universal milling head • Infinitely variable or widely graduated feeds (see diagram on the machine) • Coolant system • Electrical control cabinet (clearly arranged) • Digital display (see photos) • Heavy-duty machine construction • Very quiet operation

Condition: good (used), functionality: fully functional, Equipment & Features: • Universal milling head • Mechanical feeds • Digital position display Mitutoyo KA-200 (3 axes) • Solid cast iron construction • Classic, user-friendly controls • Electrical system and control by Schiffselektronik Rostock • Original Heckert nameplates available Technical Data (according to nameplate, excerpt): • Mains voltage: 380 V • Frequency: 50 Hz • Rated power: approx. 2.2 kW • Feeds adjustable • Machine weight: approx. 3.2 t Djdpfx Akjymdwljcecg

Condition: good (used), Technical Data (according to nameplate): • Power type / Frequency: 3~ / 50 Hz • Rated voltage: 380 V • Control voltage: 220 V • Connected load: approx. 8 kW • Rated current of machine: approx. 19 A • Fuse protection: 50 A slow-blow Equipment / Features: • Universal milling head • Feeds in X, Y, and Z axes Dsdpeymdu Rjfx Akcocg • Original control panel • Sturdy cross table • Coolant system • Very heavy-duty and durable construction • Ideal for steel, aluminum, and plastics

Year of construction: 2011, condition: ready for operation (used), We offer the KRONEN TONA RAPID 145 slicer, year 2011 – a professional machine for efficient and economical cutting of fruit and vegetables. The device is ideal for processing apples, tomatoes, carrots, onions, potatoes, kiwis, pears, mushrooms, citrus fruits, and many other products into segments (quarters), slices, and sticks. Cutting is carried out without the use of water, thanks to which the raw material retains its natural appearance, structure, and taste, and the plant reduces media consumption and the amount of wastewater. The machine achieves up to 1800 strokes per hour, which translates into approximately 3600 pieces of product/hour (depending on the raw material and type of cut). This makes the KRONEN TONA RAPID 145 ideal for use in fresh fruit and vegetable processing plants, salad and ready-to-eat meal production facilities, as well as in the HoReCa and industrial catering industries. The compact design and ergonomic feed height of 900 mm ensure comfortable operation for the operator and easy integration of the machine into the existing production line. Technical data: Manufacturer: KRONEN Model: TONA RAPID 145 Type: 145-1002 Year of manufacture: 2011 Dcjdpfeymbd Nex Akcsg Power supply: 230 V, 50 Hz, 1 phase Installed power: 0.6 kW Capacity: up to 1800 strokes/h approx. 3600 products/h (depending on the product) Max. raw material height: 110 mm Max. raw material width: 85 mm Cutting: segments (quarters), slices, sticks – without the use of water Overall dimensions (L x W x H): 2000 x 945 x 1700 mm Feed height: 900 mm Weight: 460 kg

Year of construction: 1994, condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm div. Zubehör/Werkzeuge Ø 120 und Ø 130 und weiteres, wie im Foto * Djdpfju Icv Aox Akcocg

Condition: used, Year of construction: 1998, Technical details: Dodpfx Akeva Ei Sjcscg x-travel: 820 mm y-travel: 280 mm z-travel: 410 mm spindle taper ISO: SK 40 distance table/horizontal spindle: min. 30 / max. 440 mm cross rail adjustment - horizontal: 650 mm range of revolution per miute: 40...2000 / 18step U/min swival range +/-: bei 90°: 360° und bei 45°: 360° Grad clamping surface area: 1120 x 250 mm table swivable approx.: 45° rechts / links feed:: X/Y: 12,5 - 830 + Z: 5,2 - 260 mm/min rapid traverse: X/Y: 2500 und Z: 1040 mm/min. total power requirement: 10 kW machine weight approx.: 2000 kg dimension machine xH: 2,2 x 1,8 x 1,7 m Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Maschinenfüße *

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 134291, heating capacity: 205 kW (278.72 HP), We are offering a fully operational wood chip combustion plant, pneumatically fed by two fans. The plant is still in operation and must be dismantled by the buyer. Inspection is welcome. Dcodpfx Asyl R Twekcsg

Condition: excellent (used), functionality: fully functional, Milling Machine DEBER Model FU 2 ISO 40 Used machine Internal code: SVR 371 Dsdpfx Akoylzdyjcjcg

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Dcsdpfeyly Drex Akcog