Used Hydraulic Power Unit 7.5 Kw for sale (75,965)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Nljdpfx Aszdny Rjd Sec Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2010, condition: used, Year of manufacture: Mar 2010 New: No Not tested. No guarantee. Njdpfx Adeypctqe Solc Please contact us if you can't find what you are looking for.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm Nljdpfx Adozcuw Ie Sjc -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm -Weight: 225 kg

Condition: ready for operation (used), Sanyo Denki BP030RX20 power unit from a Brother TC-321, serial number as shown in the photo, used, minor signs of wear, 100% functional. Nlsdpfx Aoi Ec Evod Soc

Condition: ready for operation (used), Fanuc A14B-0067-B002 power unit, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as per photos. Nljdpfx Aoi D Uz Sod Sec

Condition: ready for operation (used), Fanuc A03B-0402-B001 control unit + power unit A14B-0048-0002, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdpfx Adoi D Uvxs Sjlc

Condition: ready for operation (used), Fujitsu Fanuc A03B-0402-B001 Control Unit + A14B-0048-C00202 Power Unit + Siemens E321/21666 Control Panel, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Nlodpfei D U Rtjx Ad Ssc

Condition: used, power capacity 1,5 kW working pressure / bar pump capacity / l/min engine Make: AC motors Type: FBPA 90L-4 Power: 1.5kW - 1.8kW Rotation: 1400 rpm - 1680 rpm Tank volume: 14 liters Nodjzcgkgspfx Ad Sjlc Q (L/min): 3.2

Condition: used, power capacity 1,5 kW working pressure / bar pump capacity / l/min Make: AC motors Type: FCA 0L-4 Power: 1.5kW - 1.8kW Nodpfszcgg Iex Ad Sjlc Rotation: 1400 rpm - 1680 rpm Tank volume: approx. 14 liters

Condition: good (used), Input AC: 100–120 VAC, 9 A 200–240 VAC, 4.5 A 50–60 Hz Output DC: 72 V/6.7 A Application: Systems engineering Width: 62 mm Height: 125 mm Nljdpfxszdynaj Ad Sec Depth: 120 mm Weight: 884 g Condition: good, second-hand

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Nlodjyhq Awjpfx Ad Sec Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: ready for operation (used), Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Comprehensive and professional unit, from dismantled machine line. Location: Hamont-Achel, Belgium Seller is not liable for typographical or data transmission errors. The machine is consistent with age in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Rexroth Siemens Hydraulik / Hydraulik aggregate 128 L/min Siemens motor 15 kW 1460 U/min Rexroth-Pumpe 1PV2V4-31 / 80RA37MWO - 16 Umfangreiche und professionelle Einheit, entstanden aus einer zerlegten Maschinenlinie. Nljdpfxsvilnao Ad Sjc Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 Rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Extensive and professional unit, originating from a dismantled machine line. Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw Nljdpfxslxzhte Ad Ssc

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Nedpebuvbrsfx Ad Selc Weight: 758 kg Location: available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Technical specifications: ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Exhibition model. Nsdpfxjcdy Nde Ad Sslc Available at a special price. Location: In stock at Bitburg warehouse.

Condition: as good as new (ex-display), Year of construction: 2025, Basically a new machine, it was demonstrated at our in-house trade fair (3 days). 5 operating hours. Nlodpjbqachefx Ad Soc Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L/W/H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from warehouse 54634 Bitburg Immediately available Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications POWER UNIT 160 P: • Intake nozzle diameter: 160 mm • Rated motor power: 2.2 kW; 400 V/50 Hz • Max. volume flow: 2000 m³/h • Rated volume flow: 1448 m³/h • Vacuum: 2503 Pa • Filter area: 9 m² Nedpfjbpg Itsx Ad Sjlc • Filter cleaning: Compressed air cleaning • Collection container (rolling container): 241 liters • Dimensions (L x W x H): 1684 x 830 x 2050 • Weight: 288 kg • Design / Operating side, selectable: right / left Location: In stock at warehouse 54634 Bitburg Excellent price for the showroom model.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Nljdpfx Adecqy I So Ssc Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Nodpfscdy I Tex Ad Selc Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nodpfshkztwox Ad Solc Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer Nlsdoxyl Ecopfx Ad Ssc 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition model – new Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Nledpfx Adjcdrzdo Soc Maximum volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Vacuum: 2280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from Bitburg warehouse Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Nedpfxecdr Ens Ad Sslc Subject to prior sale.

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Nedpfx Aecdy I Rjd Sslc Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Nledpfx Adecdr E Ae Sjc Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.