Used Helmet Guard for sale (3,476)

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm Iodeyq Sm Aspfx Aqusau € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm € 129500,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment Iaedpfx Aqsxzuu Aeueu 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, neu Bulgarien 114970 € 2172.93 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK Iasdpfxewirxqs Aqusu 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 100,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 mm € 151900,00

Condition: new, neu Bulgarien 56920 € 1075.79 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 21 12,5 - 1250 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm Iodpfowirv Ajx Aqujau € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning length5.000 mm € 82750,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113620 € 2147.42 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm Isdjwirghjpfx Aqusau 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 86980 € 1643.92 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission Iaodpfx Aqswiq Rxouju 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 72870,00 turning length2.000 mm € 75900,00 turning length4.000 mm € 93390,00 turning length5.000 mm € 106 160,00 turning length6.000 mm € 120230,00

Condition: new, neu Bulgarien 81780 € 15.64 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection Iaodewiq Rrjpfx Aqusu safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning length2.000 mm € 70700,00 turning length4.000 mm € 88290,00 turning length5.000 mm € 101060,00 turning length6.000 mm € 115130,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 46970 € 897.13 € 500 mm 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 MK 21 20-2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 Iajdpfx Ajwiq Rfjqueu turning length2.000 mm € 49010,00 turning length3.000 mm € 53450,00 turning length4.000 mm € 59360,00 turning length5.000 mm € 74840,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113720 € 2149.31 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm Iajdowiq E Ajpfx Aqueu 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 138800 € 2623.32 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 MK Iedpfx Aewiq Droquoau 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18.5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 50210 € 948.97 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm Iasdpfx Aswiqz Djqueu 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: new, neu Bulgarien 128710 € 2432.62 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm Ijdpfxjwiqwfj Aqusau 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length6.000 mm € 165640,00

Condition: new, neu Bulgarien 121770 € 2301.45 € 1090 mm 3000 mm 500 mm 155 mm Iedpfx Ajwiqv Uoqusau 690 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 turning length4.000 mm € 130410,00 turning length5.000 mm € 141610,00 turning length6.000 mm € 158700,00

Condition: good (used), Year of construction: 2015, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good / well-maintained condition (!!) Current list price approx. 80.000 euros Iodpfjzczgcsx Aqujau Features: - Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model "SC 90" * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety guard (no light barrier) - Operating instructions in German (PDF)

Condition: ready for operation (used), Year of construction: 1998, pressure 120 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 155 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 77.0 mm/sec Control "P 40" work height max. 878 mm table width 104 mm oil volume 150 l total power requirement 11.0 kW weight 7550 kg range L-W-H 3550 x 2150 x 2600 mm - in checked conditions - machinevideo - ?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) Ijdpex Ni Ebefx Aqusau - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 35,816 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 16,800 W, number of axes: 3, This 3-axis HERMLE C 800 V was manufactured in 2002. It features a spindle speed range of 20 to 10,000 rpm and a spindle power of 25 kW. The machine has a net weight of 7,000 kg and includes additional equipment such as a cooling unit and a jib crane. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 V vertical machining centre we have for sale. Contact us for further details. Iajdpszcylqsfx Aqusu - Control Unit: Heidenhain (Control On: 114,325 hours)- Machine On Time: 111,736 hours- Program Run Time: 40,346 hours- Spindle On Time: 35,816 hours- Drive On Time: 76,783 hours- Axes In Motion: 37,963 hours- Operation Voltage: 400 V / 3 ~- Frequency: 50 Hz- Control Voltage: 24 V =- Total Nominal Current: 63 A- Total Rating: 43 KVA- Spindle Speed Range: 20 to 10,000 rpm- Spindle Diameter at Front Bearing: 70 mm- Tool Taper/Spindle Interface Options: HSK A63 (DIN 69063)- Tool Clamping Retention Force (HSK A63): 18 kN- Spindle Power (40% / 100% ED): 25 / 16.8 kW- Spindle Torque (40% / 100% ED): 159 / 107 Nm- Maximum Spindle Speed with Open Guard Doors: 3,000 rpm- Additional Equipment Included:* Cooling Unit / Chiller (FLKS 170)* Line Filter (LF BN/HC 110 G 5 B 1.0)* Ventzki Chip Hopper / Dumpster (Model LC-805-500 L, Max Capacity 1500 kg, Tare 156 kg)* ABUS Jib Crane (Load capacity 500 kg) mounted near or to the machine site* Floor cooling fan

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Ijdpszd Eynsfx Aqujau

Condition: new, color: grey, Year of construction: 2025, Container Description Our offer includes a complete package of high quality, making it unbeatable. We source the gas appliances exclusively from qualified manufacturers of high standards. The construction and the entire kitchen with all equipment are NEW! Container Details Availability: Ready for immediate delivery Color: Anthracite Delivery is included in the price, delivery to the curbside. Structure is made from isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees optimal interior temperature year-round. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal standing height: 2,385 mm Two new containers are for sale: Iaodpfxjy R S Ubs Aquju Container 1: Empty – ideal for individual use or custom conversion The water system opening, circuit breaker box, two serving hatches, and ceiling lighting are already installed (see final images in the gallery). Price: €25,000 net Warranty: 1 year warranty on body and electrical system. This price applies to the standard configuration shown. Changes or additions will incur additional costs. Container 2: Fully equipped with professional foodservice equipment – ready to use, perfect for street food Price with equipment listed below: €39,500 net. Gastronomy Equipment; Kitchen made of stainless steel Gas Appliances: • Bertos gas cooker with 2 burners, dimensions (W x D x H) 300 x 600 x 290 mm, output: 6.2 kW, made of stainless steel, G6F2B • Bertos gas grill, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B • Bertos gas fryer, 2 x 8-litre basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 3 x 11-litre propane gas cylinders Refrigeration • Under counter refrigerator ‘Liebherr’ • Combination refrigerator Liebherr Water System • Water system with canisters, 30-litre capacity with fresh and waste water containers • Two stainless steel sinks with fittings • Hygiene package with paper towel dispenser and soap dispenser • 10-litre hot water boiler • Pump Lighting • LED ceiling lighting • LED lighting with color effects around the serving hatch, remote-controlled • Emergency light Additional fittings • Serving and work surfaces made of brushed stainless steel • Two serving hatches • Insulated partition at the cooking area (fire-resistant) • Extractor hood with labyrinth filters • Anti-slip flooring for commercial kitchens • Sneeze guard (optional) • Side door entry • Generator cabinet Warranty: 1-year warranty on body and kitchen This price applies to the standard configuration shown. Changes or additions will incur additional costs. We can also build this model to your custom specifications. Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? Many vehicle details can be customized to your specifications!

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm Isdpfx Aszcvh Ioquoau - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Iajdox Iikbjpfx Aqusu Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Ijdpfx Aezd Dfioqusau Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, mileage: 573,231 km, power: 368 kW (500.34 HP), first registration: 04/2018, fuel type: diesel, empty load weight: 8,214 kg, maximum load weight: 9,786 kg, overall weight: 18,000 kg, tire size: 355/50 R 22,5 u. 295/60 R 22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 960 l, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, Year of construction: 2018, Equipment: ABS, AdBlue, EBS, additional headlights, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, lane keeping assist, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, traction control, Vehicle number #30882 Euro 6 XXL cab Intarder Wheelbase 3,600 mm Full air suspension Tyres: 355/50 R 22.5 and 295/60 R 22.5 Alloy rims 2 x 480 litre tanks Differential lock TipMatic Air conditioning Auxiliary heating Auxiliary air conditioning Cruise control Traction control Aerodynamics package 2 bunks Air-suspended/heated driver's seat MAN Media Truck radio MAN sound system CB radio RIO box Refrigerator ACC adaptive cruise control EB2 Emergency Brake Assist ESS emergency brake signal LGS Lane Guard System IV ESP Front camera right side Reversing warning system Air-suspended cab Sun visor Iedpsyvhzhjfx Aqujau Air horns Lamp bracket with additional spotlights LED daytime running lights Fog/work headlights Cornering light Central locking with remote control Electric sunroof Electric windows (dual) Electrically adjustable/heated exterior mirrors Multifunction steering wheel On-board computer Electric sun blinds Blinds left & right Axle load indicator NATO socket

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Further information Chassis semitrailer forwarding Welded fine-grained steel construction, fifth wheel plate with replaceable 2 kingpins, rear bevel to approx. 1920 mm, suspension bar for ramps at the rear and front on gooseneck, grinding rollers at the rear, drop center after cranking up to the axle unit. Drawing approval required from customer in case of order! Pair of lashing lugs at the top and side of the outer frame, 10 tons each Pair of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support, mounted on the outside Wheel chocks with holder Aluminum side collision protection Steel underride guard for EG, if technically possible Quarter-shell mudguards with anti-spray flaps according to EG 1 pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, sloping towards the entrance. Length at bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on rear slope. Depth approx. 200 mm. Note! Frame in main beam area 200 mm higher than wheel recess. In the event of an order, a precise technical inspection is still required. Wheel recess cover can be pulled out from the drop deck with hardwood inserts, on rear slope with hardwood inserts. Electric cable winch, 24 volt, pulling force 5500 kg, mounted in the offset gooseneck, not reaching into the loading area, operation with radio remote control, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller on rear slope. Axles + suspension SAF or BPW drum brake axles of our choice Air suspension with lift & lower valve + auto-reset function Wheels and tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 to tire load capacity at max. 90 km/h at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Haldex, electronic brake system with EBS socket at the front, without connecting cable (sent to the customer for approval brake calculation.15.07.2021) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for display via display in the cab, truck must be prepared accordingly, no truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering 30 mm screen-printed floor, in the drop floor between the longitudinal beams in the middleIn the tramline area covered with toothed grating in the wheel recesses with steel/checker plate covering. Access ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for entering the drop deck Pair of steel ramps for crossing on gooseneck Drop sides Approval / plates Country of approval: Germany Ijdpoi Ri Hrsfx Aqueau with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, yellow at the sides and red at the rear Warning sign according to ECE -

Condition: used, functionality: fully functional, mileage: 96,645 km, power: 265 kW (360.30 HP), first registration: 08/2019, fuel type: diesel, empty load weight: 18,580 kg, maximum load weight: 13,420 kg, overall weight: 32,000 kg, tire size: 385/55 R 22,5 u. 315/70 R 22,5, axle configuration: 8x2, wheelbase: 3,750 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, fog lights, parking heater, soot filter, traction control, Vehicle number #30673 Zoeller-ASF Medium X2evo29 Zoeller Delta 2301 Premium bin lift MOBA 3G identification system Driver's cab M Wheelbase 3,750 mm Engine brake Rear axle air suspension Tyres 385/55 R 22.5 and 315/70 R 22.5 Lift axle A2 Steering axle A2/A4 Differential lock TipMatic Air conditioning Cruise control Traction control MAN Multi Media Truck radio Driver's air-sprung seat/heated Lane Guard System IV ESS emergency braking signal Heavy-duty roll stability Hill-start assist Multifunction steering wheel On-board computer Electric windows (double) Electric exterior mirrors/heated Diesel particulate filter Headlamp levelling Turning light LED daytime running lights Beacon lights RIO-Box Fog/work lights Sun blind front and left Sun visor Central lubrication Toolbox Reversing camera Camera front right Bus stop brake Iodpfxoxx Uczj Aqusau Folding centre seat Leasing or financing available upon request!

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Isdpfx Aszcu Tcjqusau Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)