Used Helmerding Automatic Punching Press - Double Column for sale (41,563)

Condition: used, Year of construction: 1985, Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7 Hedjyvkukepfx Aa Eofi

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm Hjdpsvxwhwjfx Aa Esfi blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press Hfodpfek S Htxjx Aa Eei - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, Year of construction: 2026, The KS 652 is a double-column, semi-automatic band saw designed as the ideal working tool for professionals who need to cut bars, pipes, profiles, and other metal structural elements — with the ability to cut at angles up to 60° to the left and right. Machine description: Band saws from the KS series are the only machines in their class that allow cutting both to the left and right — simply set and clamp the vise. Once the material is positioned, the operator can set the angle and rotate the bow without reopening the vise or repositioning the bar. The vise moves transversely along the worktable, ensuring quick access. The cutting frame structure, made of electro-welded tubular steel, guarantees high stability during cutting. Like all IMET band saws, the KS model is equipped with high blade tension (2000 kg/cm²) and a 6° inclined saw, which improves material feed, reduces load, and optimizes cutting even for large cross-sections and solid materials. A wide worktable provides full support for the material. The machine is highly user-friendly and easy to operate thanks to the automatic stop system in the 0°–60° left/right range and the angle scale on the table, making it easier to set the cutting position. To increase cutting precision, IMET band saws are equipped with a system for detecting angular deviation from the center. A mechanical material detection system ensures rapid approach to the material by automatically detecting the first contact point. The end of the cut is managed by a microswitch in the blade guide, ensuring precise blade alignment thanks to hardened rollers and auxiliary bearings. All operating parameters and settings are controlled via an independent, mobile console with LED indicators for blade tension, blade guard, motor overheating, and electrical voltage monitoring. The console allows setting of machine operating parameters such as band speed, lowering speed, and cycle end management (options include: bow return with stopped blade, bow return with moving blade, or cycle end without bow return). Cutting performance can be further increased by using a 4 kW motor, a hydraulic blade tensioner, and a high-tension hydraulic system (2200 kg/cm²). Technical parameters: Power supply: 3-phase 400V Total power: 3 kW Arm lowering control: Hydraulic with smooth adjustment Hfedjyym I Uepfx Aa Eei Cutting speed: 15–100 m/min Vise base height: 844 mm Blade dimensions: 5320 × 34 × 1.1 mm Dimensions: 1895 × 2870 × 2300 mm Weight: 2100 kg

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-800 Year: 2001 Condition: Used Stock number: 0392 Builder: Rovetta Slide force: 800 tons Number of driving points: 4 Slide stroke: 700 mm Slide adjustment: 350 mm Strokes per minute: 10-24 Die height (low stroke, high slide adjustment): 1,100 mm Hjdpfoyq Tdpsx Aa Esfi Usable distance between front posts: 4,200 mm Bolster table size: 4,000 x 2,000 mm Slide dimensions: 4,000 x 2,000 mm Movable table height: 600 mm Side window size: 3,400 x 1,900 mm Number of cushions: 1 Blankholder cushion - total force: 150 tons Lower blankholder cushion stroke: 250 mm Lower blankholder working area: 1,500 x 1,000 mm.

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Hodpfxoyq Tdie Aa Esfi Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Blankholder (total force): 150 tons Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Strokes per minute: 8-24

Condition: new, neu ca. 4 Monate ab Auftragse Italien 164500 € 3109.05 € 260 to 500 mm 1400x1000 mm 600 mm 75 mm/s 5 mm/s 60 mm/s 22 kW 2800 mm 1650 mm 2750 mm Hfedpfx Aaeynm I Ne Eei 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 123000 € 2324.7 € 170 to 500 mm 1200x700 mm 600 mm 110 mm/s 7 mm/s Hedpfxjynm I As Aa Eefi 70 mm/s 19 kW 2700 mm 1600 mm 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 78000 € 1474.2 € 85 to 500 mm 900x600 mm 600 mm 105 mm/s 7 mm/s 58 mm/s 7.5 kW Hjdpfx Ajynm Ivea Ejfi 2250 mm 1150 mm 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 71300 € 1347.57 € 60 to 500 mm 800x500 mm 600 mm 120 mm/s 8 mm/s 58 mm/s 5.5 kW 1100 mm 1100 mm 2350 mm Hjdpfx Aeynm Ipoa Eefi 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 65000 € 1228.5 € 35 to 500 mm 800x500 mm 600 mm 125 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1100 mm 2300 mm 4-pillar guide Hsdpfsynm Iisx Aa Esfi table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Hjdjxlh Rfspfx Aa Esfi Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Hfodpfxsx R U Idj Aa Eoi Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Hfedpsxz Ugxofx Aa Eei Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Hfedoguvtlspfx Aa Eei Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 Hfjdodzqptopfx Aa Eoi - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz Hfjdpfx Asdzqltja Eji - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed Hfsdpfx Ajw A Amroa Eei - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Hfsdpfsfim Thjx Aa Eei Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressing force: 250 t, table width: 1,200 mm, table length: 2,000 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, ram adjustment: 150 mm, stroke adjustment: 40,200 mm, Raster Punching and Forming Press RSU 2500 - 2000 P Desch Compact Drive Hfodpfx Aasxcbbro Eji Electronic Press Force Measurement System Hydraulic Overload System 3-part Tie Rod, Cast Design Tool Carrier Table and Ram Clamp Raster VWA Hydraulic Roller Feeder, Band Width 500 mm, with Topochrom Roller Coating Ram Surface: 1000 x 2000 mm Strokes per minute: 20 – 150 Stroke Adjustment: 40 – 200 mm Raziol Segment Roller Oiler Optional with Kohler Strip System 20030.400/9-2000.2H

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame Hfedpfx Aew I Scfja Esi - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: used, Year of construction: 1993, pressure 630 KN distance between columns 800 mm stroke 150 mm table surface area 720x550 mm ram surface 720x520 mm dayligth 420 mm rapid drop speed 394 mm/sec working feed 71/17 mm/sec return speed 390 mm/sec adjustment movement of the stroke 120 mm total power requirement 15 kW Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hfsdoyutwkepfx Aa Esi If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Hfjdpsv Srfwefx Aa Esi Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW Hfodpfx Aeyt R Epja Eei weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, pressing force: 300 t, table width: 1,000 mm, table length: 2,000 mm, total length: 4,000 mm, total width: 3,000 mm, total height: 4,000 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, We offer this used AIDA 300 Ton ULX eccentric press double column, year of construction 2008. Manufacturer: AIDA Model: 300 Ton ULX Pressing force: 300 ton Year of construction: 2008 Condition: used Category ID: 1329 Type ID: 871 Machine type: eccentric press double column From the first owner company Machine is in great condition and in operation Used always under its capacity Used only in 1 shift from the purchase time untill now Made in Aida Japan First ULX press in Europe Hodpfxeytcwws Aa Esfi Delivery Terms: EXW ESKISEHIR TURKEY Payment Terms: Cash Or Letter Of Credit If you have any questions or need more information, feel free to send us a message or give us a call.