Used Heidelberg Sgb Cylinder For Die-Cutting + Hot Stamping for sale (31,195)

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system). Lodpjwabbvofx Apmshk

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Lhodpoy D Ht Ssfx Apmok Max format: 102x142 cm Min format: 50x70 cm Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Lhodszg D I Njpfx Apmsk Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Lhsdpfxex I Nfro Apmok Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Ljdpfx Apjxmiqiomjhk

Condition: used, Punching machine for, e.g., slipcases with many punching dies Ljdpfxexw N Nts Apmehk

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us. Lhjdpfxoiklxbo Apmok

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Arch press for small formats BAS 450-KF8 For pressing individual products (small folds) in single or multiple up applications Two pairs of press rollers, adjustable independently - Pre-press roller with 40 mm diameter - Main press roller with 60 mm diameter Easy and quick adjustment of sheet thickness Effortless repositioning of infeed belts Format change without tools Integrated control unit (Start/Stop) Height adjustment via lifting table (infeed height min. 550 mm / max. 900 mm) Format min.: 30 mm x 50 mm / max.: 450 mm x 450 mm Lsdpfx Apsxvfaxjmohk Maximum product thickness: 8 mm Pressing force: 8,000 N Speed: 30-160 m/min

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Lodpfjxzvamsx Apmshk Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email. Lodpfsy Ulitex Apmshk

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction Ledpfsx Ndu Djx Apmjhk • Designed for continuous professional die-cutting production • Specifications subject to alteration

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Imperia F (120x165 cm) – fully overhauled New CE conformity declaration Weight: 11,000 kg Mechanical speed: 1,200 strokes/hour With hardened punch plate 50HRC Ljdpjy T H Hkjfx Apmjhk New universal clamping frame New safety features in accordance with CE New electrical equipment New step protection mats Pneumatic brake and clutch system Mechanically completely overhauled Delivery time: 90 days Price: upon request Warranty: 6 months Image of a previously completed, fully overhauled Imperia F (120x165 cm)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Bobst SPO 160 Vision, ref. 3002 Ljdpfsy Tpfvjx Apmohk Year 2004 Maximum sheet size: 1600x1100mm Maximum speed: 4500 sheets per hour QUBE system Stripping unit Batch delivery In good working order.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate Ledpfxjy Rumyj Apmehk - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: Lhjdjy Rummspfx Apmsk – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening Ljdpfx Aey Rumaopmehk – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Ljdpfoy Rulvox Apmehk Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Lhedpjg Dgyxjfx Apmsk Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Comes with centre line system Ledpfoyrnhxsx Apmjhk 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg Lhodsxnkdgspfx Apmek overall dimensions 4.2x2.3x1.85 m

Condition: new, Year of construction: 2025, Manual die cutting and creasing ML-1500 Ljdjxluagspfx Apmehk Inner chase size (mm): 1500 x 1040 Automatic oil system Infrared security barrier Max. rule length (m):

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Lhsdpfx Apswgz Rkjmjk Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Ljdpfx Apjvyn Ttemshk Speed for die cutting 7500 per hour max

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Lhjdpfsxcayysx Apmjk Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Minimum mouth size( mm ): 8mm Lhedpfjw Rwipex Apmek Maximum die cutting pressure( T ): 350N/cm² Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm