Used Ger Rs 15/60 for sale (43,906)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement Iijdpouxfu Nefx Ahyoh - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe Isdpfxjvy Ig Te Ahyoih VDF BOEHRINGER - VDF 315 Cm / DL 2000

Condition: used, functionality: unexamined, machine/vehicle number: SS-15R, Used Tiger-VAC SS-15 R cleanroom vacuum cleaner Manufacturer: Tiger-VAC Model: SS-15 R Includes additional connection hoses. Ijdpoxuqpijfx Ahyoih Operates with an external suction system.

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m Iijdpfx Ahsvmqcqoyjh 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m Ijdpsvmqfrofx Ahysih 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm Ijdou Sbkgspfx Ahysih main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Iedpfx Ajw Dy Rqjhysih

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 4,066 mm, total width: 2,583 mm, total height: 1,829 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, overall weight: 4,300 kg, travel distance X-axis: 345 mm, travel distance Z-axis: 125 mm, workpiece weight between centers: 1,000 g, workpiece diameter between centers: 365 mm, distance between centers: 2,000 mm, workpiece length between centers: 2,000 mm, The VDF 560 DUS is one of VDF Boehringer's most popular teach-in turning machines, known for its turning diameter. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency in the production of single items and small series. This machine is currently located in our showroom, and on-site viewing is possible! Additional options & accessories: - Tool cabinet - Various tool holders - Various cutting tools - Double Multifix holder including Capto connection. - Original fixed guard. - Original documentation. Weight & dimensions: 4,300 kg 4066x2583x1829 mm Iisdpfx Ahszwnl Hoyjh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. Iisdpfxjyvuhzs Ahyeh This machine is currently set up in our showroom and can be viewed on site! Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) For all specifications of this machine, please see the last images!

Condition: good (used), Technical data for the steel beam: Manufacturer: Stow Type: Pallet Rack NS Included in the scope of delivery: 1x steel beam, used Material color: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Bracket: Single-sided, bolted crossbeam Overall length: 3,600 mm Note: Since this is a used item, scratches, damage, weld marks, or Iedpfx Ahez Hvu Ejyeih signs of rust may be present! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Iisdjzc D Dkopfx Ahyoh Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Iedpfjya Dagox Ahyeih Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable Iiodpfx Ahjl Dwnleyeh for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply Condition: 1 Serial number: 92037202009 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, used, in good condition, 100% functional, scope of delivery as per photos Iiodpfxey Rckto Ahyoh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Isdpfx Asy Hki Ajhyoih Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: new, plate width 2000 mm plate depth 1500 mm plate height 310 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 m Clamping plates - T-slot plates - panel array Iedpfx Aoy S Dupjhysih 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: used, empty load weight: 5,170 kg, axle configuration: 3 axles, first registration: 08/2014, Year of construction: 2014, Tare weight: 5170kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Iedpfx Ahszxk Itsyeih

Condition: excellent (used), functionality: fully functional, leveller UNGERER Typ 1500/3,00/23 with the dimensions: 1530 x 0,50- 3,00 mm, 23 rolls, diam. of the rolls 47 mm under power test with material is possible Iedpfx Aozxn Scjhyoih

Condition: new, *IMMEDIATELY AVAILABLE* Features: - V2A screws - 30mm aluminum side walls - Adjustable lashing eyes Net price: €2,516.81 / Gross price: €2,995.00 Article number: K71313301545.01 Technical data: • Brand: Koch-Anhänger • Model: 7.13 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 300 x 150 x 45 cm • External dimensions (L x W x H): 433 x 204 x 96 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Tare weight: 280 kg • Payload: 1,020 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/70R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Double-walled, anodized aluminum side walls, 30 mm, with integrated aluminum frame • Side wall with cargo securing system; accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A stainless) • Elaborate longitudinal supports (2 longitudinal beams) • Stable screen-printed floor, non-slip (birch wood, waterproof glued) • Very stable latches for the rear door made of V2A stainless steel (unique) • Maintenance-free rubber spring axle, hot-dip galvanized • Shock absorbers + 100km/h approval • ALKO overrunning device and parking brake • Suspension and drawbar from well-known manufacturer ALKO Isdpjzy Afasfx Ahyeih • Reversing automatic • Brake cables standard with "Profi-Longlife" (plastic coating of the steel wire strand) • 2x chock with holder • Standard equipment includes balanced 1A brand tires • Large 195/70R14 tires, balanced and capable of 100 km/h • Safety indicator on the coupling • Steel fenders • Rear door can be easily removed • 13-pole plug • Reversing lights • Large, dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Fasteners completely M8 stainless steel (V2A stainless) • Clear control panel with the most important data (tire pressure, cable layout, etc.) • Including 10-year Koch warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - V2A screws - 30 mm aluminum side boards - Adjustable lashing eyes Net price: €1,668.07 / Gross price: €1,985.00 Article number: KU7O75301545.01 Technical data: • Brand: Koch-Anhänger • Model: U7 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 45 cm • External dimensions (LxWxH): 409 x 204 x 96 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 230 kg • Payload: 520 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodized aluminum side boards, 30 mm, with integrated aluminum frame • Side board with cargo securing system. Accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A, rust-resistant) • Stable, screen-printed floor, non-slip (birch wood, waterproof glued) • Very stable latches for the rear door made of V2A stainless steel (unique) • Maintenance-free rubber spring axle, hot-dip galvanized • Suspension and drawbar from renowned manufacturer ALKO • Safety indicator on the coupling • Steel fenders Iedozy Av Sopfx Ahysih • Rear door easily removable • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Standard equipment includes balanced 1A brand tires • Large 185/70R13 tires, balanced and capable of 100 km/h • All screws are M8 stainless steel (V2A, rust-resistant) • Clear control panel with the most important data (tire pressure, cable layout, etc.) • Includes 10-year Koch warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Cover Equipment: - Adjustable lashing eyes - V2A screws - Koch Hobby cover Net: €2,634.46 / Gross: €3,135.01 Article number: KU7P75301518.11 Technical data: • Brand: Koch-Anhänger • Model: U7 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 3 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 180 cm • External dimensions (LxWxH): 409 x 204 x 245 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 270 kg • Payload: 480 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodized aluminum side panels, 30 mm, with integrated aluminum frame • Side panel with cargo securing system, accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A) • Stable, non-slip floor made of screen-printed material (birch plywood, waterproof glued) • Very stable latches for the tailgate made of V2A stainless steel (unique) • Maintenance-free rubber spring axle, hot-dip galvanized • Suspension and drawbar from well-known manufacturer ALKO • Safety indicator on the coupling • Steel fenders • Tailgate can be easily removed • 13-pole plug • Rear lights • Large safety lights • Integrated rear fog light • Lights recessed in the rear frame • Standard equipment includes balanced 1A brand tires • Large 185/70R13 tires, balanced and suitable for 100 km/h • Screws completely M8 stainless steel (V2A) • Clear control panel with the most important data (tire pressure, cable layout, etc.) • Koch Hobby cover, 180 cm, unassembled • Cover - original Koch • Cover including removable aluminum frame • Front panel NOT openable. • Available only in grey as the cover color. • Includes hook set and cover elastic bands • Removable without tools. • Including 10-year Koch guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about any special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT Ijdozy Db Ajpfx Ahyeih - Vehicle registration certificate can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, front-mounted, 3x side panel extensions Equipment: -V2A screws -Removable cover -Aluminum cover Net: €3,957.98 / Gross: €4,710.00 Article number: KU7D75301503.01 Technical data: • Brand: Koch-Anhänger • Model: U7 Iedpfx Aozy Dglohysih • Vehicle type: Covered trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 3 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 95 cm • External dimensions (LxWxH): 409 x 204 x 162 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Tare weight: 379 kg • Payload: 371 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Side panel height 90 cm + cover height 5 cm • Double-walled, anodized aluminum side panels, 30 mm, with integrated aluminum frame • Side panel with load securing system; accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A) • Stable floor made of screen-printed material, non-slip (birch wood, waterproof glued) • Very stable latches for the tailgate made of V2A stainless steel (unique) • Cover can be opened from the rear • 2 stable V2A stainless steel hinges at the front • Stable aluminum cover with aluminum tread plate, walkable • 8 mm V2A screws • Stable cover rail • Optional: crossbar set can be mounted on the rail • Stable V2A cover latch at the rear with disc lock • 2 gas struts for easy opening • Cover easily removable • Maintenance-free rubber spring axle, hot-dip galvanized • Suspension and drawbar from well-known manufacturer ALKO • Safety indicator on the coupling • Steel fenders • Tailgate very easily removable • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Standard equipment includes high-quality 1A brand tires • Large 185/70R13 tires, balanced and suitable for 100 km/h • All screws are M8 stainless steel (V2A) • Clear control panel with the most important data (tire pressure, cable layout...) • Including 10-year Koch guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Year of construction: 1997, operating hours: 34,000 h, travel distance X-axis: 570 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details. - Main Drive: 19 kW- Machine Control: NUM / Keller/Plus (IBM Monitor setup)- Maximum Torque Duty Cycle: 60% / 100%- Torque: 1800 / 1400 Nm- Max Rapid Traverse (Longitudinal/Cross): 10 / 5 m/min- Tool Turret: 8-position disc turret, Sauter VDI 30- Chuck: Forkardt three-jaw chuck installed, diameter 200 mm- Included Accessories: Steady rest- Operational Status: Out of service since mid-2023 due to operator retirement- Operating Hours: Approx. 34,000 hours (single-shift operation/power-on time) Technical Specification Iodpfxszuyqcj Ahyjih Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, bar diameter (max.): 80 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck diameter: 400 mm Iiedpfx Aozx Ti Tshyeh Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, functionality: fully functional, Charger Condition: New device Iiodpfsywpmhex Ahyjh Technical condition: New Description: High-frequency charger available in the following capacities: 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. For further inquiries, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website at fleischmann-foerdertechnik. We are happy to provide quotes for leasing & financing as well as delivery at competitive rates. Trade-ins of Linde equipment are also possible—even if you do not purchase a device from us. The operating hours indicated were recorded at the time of listing. Subject to prior sale, changes, and errors.