Used Fortuna Uaf 470 for sale (1,168)

Condition: used, Used Chamber Filter Press / Filter Press HAKÜ 470 x 470 Plate size: 470 x 470 mm Working length: 920 mm Plates: 13 Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: 320 bar Volume of filter cake.: 51,5 Liter Bsdobpg Srepfx Ak Ejwl Plate material: PP Filtrate discharge: open

Condition: used, System: Chamber filter press, drip-tight, used Application area: Chamber filter press Design: side-bar guided Year of construction: 2002 Filter plate size: 470x470 mm Number of plates: 10 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available tailored to the medium Discharge: closed Bwodswqzh Rspfx Ak Esl Filter area: approx. 3.3 m² Press content: approx. 48 dm³ Filter pressure: approx. 15 bar Plate transport: manual Pump technology: optional Purchase or rental: Inspection of the systems by appointment at our facility. Miscellaneous: Would you like to rent or buy this system? Contact us, we are happy to be at your disposal.

Condition: good (used), Plant: Chamber filter press used Design: side rail guided Filter plate format: 470x470 mm Number of chambers: 13 Cake thickness: 25 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: open Filter area open: approx. 7.68 m² Press capacity: approx. 41.88 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Bedpsqa Dwfsfx Ak Eewl Plate transport: manual Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional on request. The system is refurbished after receipt of order. Special service: optional on request. The system will be set up according to your requirements after receipt of order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: used, REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Bwsdpfx Akjb U Du As Eol Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact us, we are available.

Condition: ready for operation (used), Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly. Bodpfxomt Efno Ak Ejwl

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm Bedpfx Ajhvfznek Ejwl -Weight: 580 kg

Condition: good (used), Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos Bwsdsxrkquspfx Ak Esl -Dimensions: 560/470/H405 mm -Weight: 62 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, excavator cylinders -Manufacturer: O&K, hydraulic cylinder with control valve stroke 470 mm -Type designation: 1 713 351 1554 541 -Piston rod: Ø 70 mm Bwodpjt H Tqmofx Ak Ejl -Hole diameter 120/60 mm, hole spacing 970/1440 mm -Dimensions: 1160/390/H230 mm -Weight: 99 kg

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output Bjdpfxjhy T H No Ak Ejwl -Manufacturer: Siemens Simatic analog output ovp -Type: 6ES5470-4UB12 -Cardboard dimensions: 270/220/H30 mm -Weight: 0.6 kg

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output Bsdpfx Aeh Di E Rok Eewl -Manufacturer: Siemens, Simatic S5 analog output -Type: 6ES5 470-8MB11 -Number: 1x module available -Price per piece -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output Bjdpfoh Di Hrsx Ak Eewl -Manufacturer: Siemens, Simatic S5 analog output -Type: 6ES5 470-8MB12 -Number: 1x module available -Price per piece -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Condition: used, Machine vice, vice, drill press vice -Jaw width: 280 mm -Back height: 150 mm -Clamping depth: max. 470 mm -Dimensions: 920/400/H255 mm Bsdjdnllgepfx Ak Eewl -Weight: 152 kg

Condition: used, Year of construction: 2023, operating hours: 1,300 h, power: 113 kW (153.64 HP), Equipment: air conditioning, all wheel drive, front linkage, Errors and prior sale excepted! Internal number: 1334. 7302669 ----EQUIPMENT 40 km/h * Air conditioning * Radio * Cooling compartment * Rotating beacon * Rear three-point hitch * Manual top link * Dual-line air brake system * Work lights * 5x double-acting spool valves at the rear * Piton fix and K80 trailer hitch Bwsdpfx Akewxrzkj Eel * Front loader quick coupler * Front loader Claas FL 120C (year 2022 / lifting capacity 1,825 kg) ... and much more. ----The vehicle is in unrefurbished condition! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to take your vehicle in part-exchange. Financing / leasing possible with no down payment! Do you have any questions? We would be pleased to advise you!

Condition: excellent (used), Year of construction: 2007, operating hours: 10 h, machine/vehicle number: 103414, High-performance automatic production line for ring binders. Sheet feeder (vacuum feeder), creasing station, gripping hole punching unit (finger hole eyeletting machine), double riveting station, operator control panel (Fanuc QuickPanel View), mechanical feeding unit, single riveting station, folding station. Cover height: 120 – 400 mm; cover width: 300 – 820 mm; material thickness: min. 1 mm – max. 3.5 mm; rivet spacing: 90 – 300 mm. Bwedpfox Apb Hox Ak Ejl

Condition: new, machine/vehicle number: 56c59c8aba35227ffb44c9f75, empty load weight: 11,350 kg, maximum load weight: 26,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis Jumbo semi-trailer Welded steel construction with narrow cross member spacing and reinforced design, low loader external frame profile, for transporting construction machinery up to 32000 kg and up to a max. external width of the construction machinery of 2550 mm, fifth wheel plate with replaceable 2 king pins. Rear inclination to approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/checker plate, In the low bed Omega rail on the side at the bottom of the outer frame as a suspension strip for tarpaulin and spacer for the lashing points, not in the wheel area. With lift table on an additional fixed lightweight outer frame with omega profile, lift table can then be raised with closed tarpaulin! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation, free swing radius to the rear approx. 1950 mm, Folding rear support 2 wheel chocks with holder Aluminum side bumpers Quarter-shell mudguards in front of and behind each axle With anti-spray flaps behind each axle Steel underride guard Rear spray flaps across the entire width 4 stainless steel storage box, w=800/h=350/t=350 mm, with polished door, lockable 2 x in FR-left and 2 x in FR-right in front of the 1st axle Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically for transfer to gooseneck, with mechanical locking when raised. (inclined cylinder for good ground clearance, Fliegl standard). Operation in FR-right + additional operation with radio remote control (same as ramp operation) Lifting table can be raised with closed tarpaulin! Tarpaulin suspension in the lift table area on an additional fixed lightweight outer frame with Omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms can also be used when lowered! Lashing eyes Gooseneck: 4 pairs of 5 to lashing eyes embedded in the outer frame 2 pairs of lashing points at the top and sides of the outer frameLow bed 8 pairs of lashing mushrooms at the top and sides of the outer frame, each 10 tons 9 pairs of 5to embedded in the outer frame Axles+suspension SAF drum brake axles last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve + auto-reset function H & S function with quick air release 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Wheels and tires 235 / 75 R 17,5 from leading manufacturers Twin steel rims, factory silver Brake system Bsdpfx Aksi Riw Aj Eswl 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front, in LED 2 white/red lane departure lights at the rear, 1 rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illum

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, fully automatic cleaning system designed to meet demanding requirements for cleaning/degreasing and drying results. Component cleaning can be performed with the basket in a stationary, swiveling/oscillating, or rotating mode. The spray system, featuring multiple spray bars mounted on the longitudinal and end sides, is fixed inside the working chamber. Basket dimensions: LxWxH 470x320x200(h) mm Two baskets can be washed in parallel (simultaneously) Maximum loading weight: 100 kg Spray pressure (wash cycle): 4 bar, Circulation rate: 360 l/min Control: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blowing Includes steam extraction Includes stainless steel exterior cladding Includes preparation for retrofitting an oil separator Includes bag filter for medium maintenance Includes 2 stainless steel wire baskets, 470x320x200(h) mm Bjdpsgrm Dfofx Ak Ejwl System dimensions: LxWxH 1,425x1,920x1,980(h) mm Dimensions include open loading door Electrical connection value: approx. 25 kW

Condition: good (used), driver's seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, driver's seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm Bsdjx Ivrxopfx Ak Eowl -Weight: 20 kg

Condition: ready for operation (used), Heidenhain LS 603 length measuring rod ML 470 mm Id.336 972-6T SN:12359072E + AE LS 603 reading head Id. 326 799-01, the article has been refurbished, used, normal signs of wear, 100% functional, scope of delivery as per photos Bwedpercvkbofx Ak Eol

Condition: good (used), Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit -Core drill bit: Ø 150 mm Bwjdpfx Akeb A Sm Aj Eol -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 840x540x1980 mm Weight 158 kg Total power requirement 2,1 kw Bjdevz Hdaepfx Ak Eowl

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25 mm Bwedoc Spnrepfx Ak Eol -Total length: 470 mm -Total height: 195 mm -Weight: 18 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 720/470/H 1000 mm Bwedpfxjxbzddj Ak Esl -Weight: 84 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. Bwsdpfx Aovmpx Rok Eol - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: new, Fortuna FAVY 70 L 220.319 grinding spindle SN:207060, unused, 100% functional, scope of delivery as per photos Bwsdpfei D U Raex Ak Esl

Condition: new, Fortuna FAVY 70 L 220.319 grinding spindle SN:207059, unused, 100% functional, scope of delivery as per photos Bwsdpfx Akji D U N Ss Esl