Used Fliegl Dhks 390 27M³ Asphaltprofi Thermo for sale (2,339)

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75 r17,5, color: red, The images are archive images; the vehicle may still be in use! Further information Steel welded construction, continuous tilt shaft at the rear with 80 mm ball bearings Front transmission support leg, folding rear support, 2 wheel chocks with brackets, steel underride guard, full-width rear mud flaps, quarter-shell fenders, spare wheel, same make as base tire, steel rim, loose, 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note! The side panel touches the storage compartment when folded down. ``` Lockable storage space for loading ramps beneath the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair: 8,000 kg (rear ramp attachment bar). Towbar with tested 40 mm towing eye, towbar height adjustable via spindle, max. adjustment range: 300 mm. BPW drum brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Cjdjlhpzvopfx Airogu Dual-line pneumatic brake system. Color-coded cable routing for easy servicing. Manual spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connecting cable. Caution: The trailer may only be towed by towing vehicles that ensure the ABS is effective. 2 interchangeable coupling heads at the front, with connecting cables to the towing vehicle. 24-volt multi-chamber lights, yellow LED side lighting, 2 white position lights at the front. 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable connectors at the front, with connecting cable. Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose. Hydraulic operation via the truck's PTO. Sturdy tipping body with 4 mm sheet steel floor, steel side wall construction, continuous side walls, foldable and pivoting with central locking at the bottom. Rear corner stanchions are pluggable. The rear wall is foldable and pivots, with central locking at the bottom. Bedside length approx. 5,000 mm, side walls with 6 hinges at the bottom, bed width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with DEKRA approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for a single-line license plate holder, contour markings with reflective stripes according to ECE R 048, white on the sides and red on the rear

Condition: used, maximum load weight: 31,410 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, You can find our entire vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. - 3 SAF axles - Disc brakes - 1st axle with automatic lift axle Cjdpew Tpr Uefx Airegu - Air suspension - 24 t, 2-speed landing gear, single side operation - Rear extension ladder - Plastic toolbox with drawer and shelf - 2-line air brake system, EBS/ABS - 385/55 R22.5 tires - Cargo Floor moving floor, approx. 10 mm floor profile - Rear wall made of aluminum hollow profiles, double-winged door - LED work lights - Frame painted in DB 7350 Novagrau - Body painted in RAL 7035 light grey - Rolling tarp similar to RAL 3002 carmine red

Condition: excellent (used), functionality: fully functional, mileage: 622,000 km, power: 308.91 kW (420.00 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 73,000 mm, Year of construction: 2018, Euro 6 compliant Valid TÜV (technical inspection) until 09/2026 Thermo-King T-1000R Tandem trailer, 18 tons, available at an additional cost Cgedpfx Asy Urcyoirsu Trailer: €6,900 net Technically sound and ready to drive.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Cgjdpjy Ulqdofx Airsu Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS

Condition: new, empty load weight: 5,740 kg, maximum load weight: 24,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, rotating beacon, 3 axles, SAF axles, turntable, leaf spring suspension, ABS (anti-lock braking system), can be widened to 3m, lashing points, two-part loading ramps, mechanical ramps, extendable drawbar, side aluminum fender, twin tires, EBS. Superstructure: Loading length approx. 8.5m, can be widened to 3.05m. Demo vehicle! Parabolic suspension with axle equalization at the rear, 3x 10t SAF axles, permissible gross vehicle weight 30t possible, drawbar adjustable in length. New vehicle from stock, registered on July 21, 2020. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Cgodpfx Aexbttqjirou

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgsdpfxjy Stths Airsu

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030381, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: black, The images are archive images; the vehicle may still be in use. Fine-grained steel welded construction, kingpin plate with interchangeable 2" kingpin, slightly angled outer frame with "Load-Lock profile" for securing lashing straps, 24 tons. Two-stage support wind, single-sided operation, with straight lower section, without lateral thrust compensation. Note: Free support base angle or free rear swivel radius approx. 1930 mm without supports, extension ladder at the rear, door lock on the side, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact protection, "blocker" - transverse galvanized steel angle, as forklift protection and to protect the door hinges, pallet stop on both sides approx. 15-20 mm high, in bolted version, loading height reduced by approx. 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking system: 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable, with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the instrument panel in the cab; truck must be appropriately prepared, axle load detection via EBS-CAN bus signal, for display on the instrument panel in the cab; truck must be appropriately prepared, no truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this requires a prerequisite in the truck). Electrical system: 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED. 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor: Sieve printing plates approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Body Assembled body, assembled body. Front wall / front corner posts 2,580 mm high, corner posts made of steel in full volume design, release mechanism for side tarpaulin on the front wall, "crash blocker", at the bottom inside at approx. 140 mm height with steel impact protection. Intermediate posts: 2 pairs of sliding posts, adjustable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom. 2 pairs of post positions. Insertion slats: 5 rows of aluminum V-insertion slats. Codpjy Tvwxjfx Airsgu Rear wall / rear corner posts Rear corner posts made of steel to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal twist-lock latches each. Tarpaulin: Tarpaulin, with welded-in horizontal and vertical straps, tension closures made of stainless steel. Roof: Sliding roof, end lift at the rear that can be folded up, with the roof that can be slid from back to front, L-roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, hardly any deflection of the roof beam when loading and unloading, anti-ice system, with 1 hose in the mid

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Cgsdpfx Aiey Tvuwjrsu Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: red, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, container locks: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, with the longer version of the pivot pins for the container locking mechanism. 24 tons. Two-stage support jacks, single-person operation, with straight lower part, without lateral thrust compensation. Outrigger plates with holder, side impact protection, underrun protection (aluminum). With anti-splash flaps according to EC, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam. Hose racks approx. 4500 mm long (including hose box) for hose pipes 2 x DN 200 on the outside + 2 x DN 160 in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes, stainless steel grounding plate at the rear on the right-hand side of the frame, with international grounding sticker on the frame, steps at the rear right on the underrun protection, at the rear on the right-hand side on the main beam, tread plate approx. 260 mm long and 300 mm wide. Axles + Suspension Cgjdpfx Aioy Tvphsrju SAF disc brake axles, "axle / chassis laser-measured" reduces tire wear and fuel consumption, axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight. Air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, activation "3x brake" (starting aid is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve, vehicle - driving stability system. Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installed. Wheels and tires 385/65 R22.5", manufacturer's choice, steel rims, factory silver. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connection cable. Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution is possible). This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-cross-member-load-transfer areas"). Country of registration / Signage Warning sign according to ECE - 70, approval according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III, / registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for sub

Condition: used, axle configuration: 3 axles, total width: 25,500 mm, total height: 35,000 mm, Year of construction: 2018, Equipment: ABS, = Further options and accessories = - Air suspension rear - Air suspension front = Remarks = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Fliegl DTS 300 low loader trailer BPW axles, drum brakes, spring loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading area dimensions: L 8,490 mm x W 2,510 mm, tire profile: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm If required, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. Further information is available on our website. ... Errors, changes, and prior sale excepted!!! = Further information = Cgjdsy Svrgjpfx Airju Unladen weight: 6,350 kg Payload: 17,650 kg Gross vehicle weight: 24,000 kg Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 30,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2021, next inspection (TÜV): 01/2027, loading space length: 7,200 mm, loading space width: 2,450 mm, loading space height: 1,550 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2020, Equipment: ABS, * HYVA hydraulic system with low-pressure cylinder * Automatic lowering with shut-off valve * Vehicle stability system * CRAMARO electric sliding tarpaulin cover * 1st axle automatic with forced lowering and starting aid ----* Tire Pressure Monitoring System (TPMS) * SAF axles with disc brakes * HALDEX COLAS & TEM * HALDEX braking system with EBS-E ----* LED lights * Alcoa LM rims * Dual hook lock ----* Tire dimension: 385/65R22.5 * Technical gross weight: 38,000 kg * Unladen weight: 4,200 kg * Total length: 8,450 mm * SP inspection due: 06/2026 ----Vehicle number: 12076 ----Errors and prior sale excepted ----Advertising and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other services, we can offer you the following for an additional charge: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangement Application for export license plates Vehicle transport Vehicle registration Vehicle recovery and transport Cedpjy Srihofx Airjgu ----Your VTS Team

Condition: used, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Cjdpfx Aey Slp Ieirogu Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Cgjdpfx Aioy Slhqsrsu Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention: The images shown are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Skeletal trailer for freight forwarding Fine grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame features "Load Lock Profile" for attaching lashing straps 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensator Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter fender mudguards Axles & Suspension 1st axle: SAF drum brake, 2nd axle: BPW drum brake Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5, manufacturer at OEM's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side mounted yellow LED lighting set as far in-board as possible 2 white marker lights at the front 2 white/red lane position lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Floor Phenolic resin-coated plywood approx. 30 mm thick, cross-joints with Omega inlay, on longitudinal bearers for high point load capacity for forklift axle weight up to max. 7,100 kg Note: Floor deformation due to weather influences possible! Front Bulkhead/Corner Posts Bulkhead height: 1,200 mm, corner posts made of steel in volume design, with "viewing windows" Approval / Signs Country of registration: Germany With DEKRA inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Cgedpfxsy Sk U Aj Airsu Contour marking with reflective strips in accordance with ECE R 048, white on the sides, red at the rear Painting Frame: RAL 3002 Carmine Red Landing legs: black coated Front bulkhead: RAL 3002 Carmine Red Attention: The images shown are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702011668, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate weight: 16,000 kg Cjdpfxey Sk Sze Airsgu Stated fifth wheel load: 11,000 kg Tare weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis - Semitrailer for Forwarding High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity Outer frame with "Load-Lock profile" for lashing strap attachment 24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter-shell mudguards Axles & Suspension BPW disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Brake System with EBS socket at front, no connecting cable Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation! With lift/lower valve Vehicle stability control system Wheels and Tyres 385/55 R19.5" make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights Side yellow LED lighting as deeply recessed as possible 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg) Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Stakes 25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows" Approval / Signs Country of Registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear Paintwork Frame: RAL 3002 carmine red Landing gear: Black coated Front wall: RAL 3002 carmine red Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Cedpey Sk Rqsfx Airegu Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Cedpfx Aoy Rxmwsiregu Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: used, maximum load weight: 26,300 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 08/2017, next inspection (TÜV): 07/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 2-axle Fliegl SZS 320 VIN: 2021899 Chassis / Attachments: * Air suspension // Raise and lower * Jost landing gear * 2 x BPW Eco Plus axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread: Front ~70%, Rear ~70% Body: * Standard tautliner * Pallet stops on both sides * Edscha sliding roof * Side curtains * Multilock side rail system Weights: * Gross weight: 31,000 kg * Unladen weight: 4,700 kg * Payload: 26,300 kg Miscellaneous: * German vehicle * MOT / Safety inspection valid until 01/2027 ---- New main inspections / safety checks or weight downgrades/upgrades are possible upon request. We are happy to assist you in obtaining export/transfer licence plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is our highest priority, so we offer our clients an excellent all-round service package and provide a competent contact person to accompany them throughout the purchase or sale of their vehicles. See for yourself! Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Cgedpfsy Rv Irox Airju Arranging special transports We will happily help organize special transports. Temporary/export licence plates We will gladly assist you in obtaining export or short-term licence plates.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system Cgedpfx Aijy Rrplsrju 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, maximum load weight: 6,100 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 10/1998, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 42 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 1998, 2-Axle Fliegl TPS 89 Pr.+Pl. Trailer with Drop Sides VIN: W1F20917 Chassis / Attachments: * Air suspension with lift/lower function * Tyres: 215/75 R17.5 * Tread depth remaining: front approx. 30/60%, rear approx. 70/40% * Spare wheel holder * 1x Haacon landing leg * 2x rear support legs Body: * Fliegl Pr.+Pl. with drop sides * 60 cm side walls * 4x lashing eyes per side * Dimensions: 6,200 mm x 2,480 mm x 3,020 mm * Approx. 68 m³, 22 pallets Weights: * Gross weight: max 8,900 kg – reduced to 4,500 kg * Unladen weight: 2,800 kg Cgodpfjy Rgyrsx Airou * Payload: 6,100 kg Other: * German vehicle New main inspections/safety tests or changes to weight ratings (up- or downrating) available on request. We are happy to assist with export/transfer number plates, as well as organising the transfer of your purchased vehicles within Germany. Contact us! — We speak the following languages: German, English, and Russian! — No liability for printing or typing errors. Subject to change, prior sale or errors! — Who are we? Leible Nutzfahrzeuge is a family business located in Kehl am Rhein. With our many years of experience in preparing and marketing commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge is particularly strong in the sale of new and used commercial vehicles. Our 11,000 m² premises host a wide range of vehicles. Our business philosophy is based on fairness and integrity. As customer satisfaction is very important to us, we offer an excellent all-round service package and provide you with a competent contact partner who will assist you with the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organising special transports We are happy to help you organise special transports. Short-term/export number plates We are happy to assist in obtaining export/temporary plates. Customs formalities We are happy to assist you with customs procedures.

Condition: used, maximum load weight: 23,730 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 04/2022, Sliding tarp left/right, sliding roof, EcoLift lifting roof approx. 380 mm raisable, AAC Basic, toolbox, SAF landing gears, fire extinguisher holder, colour grey Cgodpeyf Sy Ssfx Airju

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Cedpfx Aewk Dc Rsirsgu Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: new, Year of construction: 2025, color: white, New and unused 10-foot refrigerated container Thermoking Magnum Plus refrigeration unit Cools down to -40 °C Heats up to +30 °C = Further Information = General Information Year of manufacture: Apr. 2025 Model year: 2026 Csdpfxsy Ix D Ds Airogu Dimensions Dimensions (L x W x H): 299 x 244 x 259 cm Weights Unladen weight: 2,360 kg Payload: 24,000 kg Gross vehicle weight: 26,358 kg Functional Cooling range: -40 °C to +30 °C Refrigeration engine: electric Condition General condition: very good Technical condition: very good Optical condition: very good Further Information Contact Arne Honingh for more information.

Condition: new, Year of construction: 2025, color: white, New and unused 10-foot refrigerated container Thermoking Magnum Plus refrigeration unit Cools down to -40 °C Cgodpfoy Ixwdex Airju Heats up to +30 °C = Further Information = General Information Year of manufacture: Apr. 2025 Model year: 2026 Dimensions Dimensions (L x W x H): 299 x 244 x 259 cm Weights Unladen weight: 2,360 kg Payload: 24,000 kg Gross vehicle weight: 26,358 kg Functional Cooling range: -40 °C to +30 °C Refrigeration engine: electric Condition General condition: very good Technical condition: very good Optical condition: very good Further Information Contact Arne Honingh for more information.

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Cgsdpfx Aexukh Eoireu Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes