Used Exeron S 310 Mf for sale (70,296)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. Kdodpfsyx N Hqex Akxsk OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: used, mileage: 45,015 km, power: 96 kW (130.52 HP), first registration: 10/2021, fuel type: diesel, fuel: diesel, color: blue, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, traction control, trailer coupling, Leather gear/selector lever handle, particulate filter, on-board computer, air conditioning, central locking with remote control, sliding door for load/passenger compartment on the right, audio/radio remote control on the steering wheel, low emissions according to Euro 6d-TEMP emissions standard, audio system: radio with USB and Bluetooth hands-free system, second folding remote key, body/build: standard high-roof panel van, cruise control, Seat Package 13: driver’s seat (4-way adjustable) – double passenger seat, fabric, Audio System 13: digital radio reception (DAB/DAB+) with 4 multifunction display, heated windscreen, Sortimo Sobogrip Plus load compartment floor, Sortimo Sowaflex lining in load/passenger compartment, Sortimo shelving system, fog lights with static cornering light, anti-lock braking system (ABS), electrically adjustable and heated exterior mirrors, fog lamps, driver's seat armrest, electric windows, front and rear parking sensors, programmable battery monitoring, fixed ball-type towbar, overhead storage shelf in cab, all-weather/ all-season tires, Trailer Stability Assist (TSA), drive type: front-wheel drive, hill-start assist, integrated indicators in exterior mirrors, vinyl flooring in load/passenger compartment, brake assist, docking station (MyFord Dock), entrance lighting, electronic brakeforce distribution (EBD), electronic stability program (ESP), electronic traction control, FordPass Connect incl. eCall, 6-speed gearbox, 180-degree rear wing doors, recirculation heater, grille with chrome trim, load compartment ventilation, LED cargo area light, leather steering wheel, height and reach adjustable steering column, medium-height roof, engine: 2.0 L - 96 kW TDCi catalytic converter, MyKey – programmable second key, digital radio (DAB+), wheelbase 3300 mm, full-size spare wheel, rear mud flaps, front mud flaps, crosswind assist, Service Line package, Visibility package 1, cab seats: driver's seat with lumbar support, ... changes, intermediate sale and errors excepted. Kdodpfx Akjx A Sf Ujxek

Condition: used, mileage: 169,533 km, power: 70 kW (95.17 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Drives up to 4th gear. The Mercedes-Benz Sprinter 310 CDI Maxi is a used box van, first registered on 30/03/2011. With a mileage of 169,533 km and a robust 2,143 cc diesel engine, it meets the Euro 5 emissions standard. The engine produces 70 kW (95 hp) and is paired with an automatic transmission. The vehicle offers a generous cargo volume with exterior dimensions of 2,694 mm in height, 2,100 mm in width, and 7,057 mm in length. In terms of equipment, the Sprinter features a walkthrough door, reversing camera, and shelving systems in the cargo area, making it an ideal companion for professional freight operations. The van is painted in metallic yellow and is fitted with a green emissions sticker (Euro 4). The cabin accommodates two persons and the vehicle has four doors in total. Fuel consumption is 9.8 l/100 km (combined), with CO2 emissions at 259 g/km. The vehicle height allows for versatile loading options. The gross vehicle weight is 3,500 kg. The MOT (TÜV) is valid until October 2025, providing added assurance for the next owner. Kodpfx Akjyxhypsxedk Sale exclusively to trade customers (agriculture, self-employed professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 118,000 km, power: 70 kW (95.17 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Key defective. The Mercedes-Benz SPRINTER 310 CDI Maxi is a professional commercial vehicle that perfectly combines performance, comfort, and efficiency. Its 2,143 cm³ diesel engine always provides enough power to effortlessly tackle even demanding transport tasks, while the automatic transmission guarantees a relaxed and precise driving experience. Ksdsyw Akmepfx Akxsdk With a mileage of 118,000 km and first registration in May 2011, this Sprinter is presented in well-maintained, immediately operational condition. The box body offers secure and generous storage space for a wide range of goods, while the integrated racking system optimally structures the cargo area, ensuring tools, materials, or spare parts are always within reach. The integrated reversing camera makes maneuvering easier, increases safety, and ensures that even tight or challenging work areas can be managed without difficulty. Thanks to the Euro 5 emissions standard, the vehicle meets modern requirements and is economical to operate. The Mercedes-Benz SPRINTER 310 CDI Maxi combines robust engineering, thoughtful features, and high driving comfort, making it the ideal partner for trades, retail, or logistics—a vehicle designed to make everyday work more efficient, safer, and noticeably more comfortable. Sale only to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Kjdpfxjxa Epbs Akxsdk Total weight: approx. 6,000 kg

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim Kdjdpfx Aoywpcpokxok sign making equipment large format cutter

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Kjdpfx Akjytr Hboxodk Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Kdedpfx Ajdyky Tskxok Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Kodpfx Akjdykhmsxsdk Speed max up to 15.000 Prod./h Table height 876 mm

Condition: new, Year of construction: 2025, machine/vehicle number: XPD00285, fuel type: diesel, power: 248 kW (337.19 HP), motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Kodpfet D Uhzex Akxjdk = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 67.2 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final

Condition: used, mileage: 148,267 km, power: 77 kW (104.69 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,140 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,767 mm, total width: 2,200 mm, total height: 2,900 mm, loading space length: 3,205 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1155. JS47555 ----EQUIPMENT - Speed limiter - 6-speed gearbox - Electronic ABS with EBD - Driver airbag - Manually adjustable exterior mirrors (2) Kdjdpfx Ajx Ndmgekxek - On-board computer - Flat roof - Overhead storage compartment in front roof area - Headliner in driver's cab - Rev counter - ESP with TSC - Electric front windows - Ford Easy Fuel system - Glove compartment with lid - Interior lighting with delayed switch-off - Solid paint finish - Adjustable steering column - Diesel particulate filter - Dropside body: Standard (wide) - Radio pre-installation - Dipped beam headlights - Power steering - Seat belts - Seat Package 4 - Daytime running lights - Recirculation control - Immobilizer - Heat-insulating, lightly tinted glazing - Central locking with remote control... and much more. ----The vehicle is unsanitized / not cleaned or prepped! Nationwide delivery available for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing / leasing available with or without down payment! Do you have any questions? We are happy to advise!

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Machine Benefits Technical Machine Benefits • Connected load: 84 kw • Nominal voltage: 3 x 400 v • Control voltage: 24 v Ksdpex U Tihsfx Akxodk • Safety distance: 310 mm • Overrun time: 128 ms • Overtravel: 62. 3 mm • Max platform height: 750 mm • Platform dimensions: 1850 x 1300 mm • The systems are fully functional and were used in 2/3-shift operation between 2017 and 2022. • The spray cylinders were resealed and the insulation panels replaced in 2023. Extra Information Machine still under power

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Kedpfeyvmq Ijx Akxsdk Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Ksdjq Rb Irspfx Akxodk cutting length 3100 mm with rear fence

Condition: used, functionality: fully functional, mileage: 353,263 km, first registration: 05/2017, fuel type: diesel, wheelbase: 6,300 mm, brakes: engine braking, color: white, gearing type: automatic, Equipment: ABS, airbag, Iveco Stralis 310 Schmitz refrigerated box with Carrier cooling unit and tail lift. Refrigeration unit: Carrier SUPRA 1150 Schmitz box dimensions: 8.90x2.47x2.60m Tail lift: Dautel, 1,500 kg capacity First registration: 05/2017 Mileage: 353,263 km Wheelbase: 6,300 mm Engine brake TAILORED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS IN OUR GROUP: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION - OFFICIAL DEALER FOR: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 SHOWROOM OPENING HOURS: Ksdpfjya Dkxsx Akxodk MONDAY-FRIDAY 8:30 AM – 7:00 PM SATURDAY 8:30 AM – 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL / INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder- 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper body – 4 axle – 4 Rear Axles – Tway – T-Way-540-460 hp – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain Side – Box – Tail lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl shall not be held liable for any discrepancies in technical specifications, equipment, or features that may, in some cases, differ from those stated in the description. We invite you to verify the characteristics of each specific vehicle.

Condition: excellent (used), Year of construction: 2006, operating hours: 8,513 h, functionality: fully functional, machine/vehicle number: 8042942323C, We are offering this refurbished Gildemeister CTX 310 V4 CNC SIEMENS 840 D SHOPTURN CNC turning and milling center, year of manufacture 2006. Serviced and prepared for transport Extensive tool accessories included, such as tool cabinets and measuring devices Year of manufacture: 2006 Weight: 3950 kg Kodeyvfq Sspfx Akxodk Maximum spindle speed: 6000 rpm Connected load: 26 kVA Max. connection current: 35 A Current: 38 A Mains voltage: 400 V Frequency: 50/60 Hz Control voltage: 230 V Control power consumption: 150 W Internal voltage: 24 V If you have any questions or need more information, please feel free to send us a message or call us.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, controller model: POWER CONTROL PC22, rotational speed (max.): 12,000 rpm, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Glue Application Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Rough top and bottom flush trimming: available Kdodpfjyqx U Hjx Akxok Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Wide belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Condition: used, Year of construction: 2023, operating hours: 237 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tyres (front): 540/65 R28, Tyres (rear): 650/65 R38, Operating hours: 237, First registration: 19.12.2024 Kedpfxjw A Hgpj Akxodk Basic equipment / technical data ENGINE Max. power 121/165 kW/hp (ISO 14396) Max. power with power management 136/185 kW/hp Max. torque 790 Nm, with power management 800 Nm Rated power 134 kW (ISO 14396) Max. PTO power 103/140 kW/hp (OECD) 4 cylinders, 4.9 l AGCO Power - 49 LFNT-D5 Exhaust aftertreatment with DOC - diesel oxidation catalyst, 3rd generation SCR & diesel particulate filter Emission standard: Stage V Electronic engine control with Vistronic fan management Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare radiator package 280 litre fuel tank

Condition: used, Year of construction: 2024, operating hours: 775 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tyres (front): 540/65 R28, Tyres (rear): 650/65 R38, Operating hours: 775, First registration: 14.06.2024_____Basic equipment/ technical data ENGINE Max. power 132/180 kW/HP (ISO 14396) Max. power with power management 147/200 kW/HP Max. torque 800 Nm, with power management 840 Nm Rated power 141 kW (ISO 14396) Max. PTO power 114/155 kW/HP (OECD) 4-cylinder, 4.9l AGCO Power - 49 LFNT-D5 Exhaust aftertreatment with DOC - Diesel Oxidation Catalyst, 3rd generation SCR & Diesel Particulate Catalyst Emission standard: Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare cooling package 280 liter fuel tank Kdedpfx Aetmn T Nokxok

Condition: used, Year of construction: 2024, operating hours: 276 h, power: 148 kW (201.22 HP), maximum speed: 50 km/h, overall weight: 7,000 kg, front tire size: 540/65 R30 | 0%, rear tire size: 650/65 R42 | 0%, maximum load weight: 7 kg, tire size: 650/65 R42, operation weight: 7,000 kg, number of beds: 30, Tyres (front): 540/65 R30, Tyres (rear): 650/65 R42, Operating hours: 276, First registration: 05.12.2024_____Basic equipment / technical data ENGINE Max. power: 132/180 kW/hp (ISO 14396) Max. power with power management: 155/210 kW/hp Max. torque: 750 Nm, with power management 860 Nm Registered power: 148 kW (ISO 14396) Max. PTO power: 114/155 kW/hp (OECD) 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V Exhaust aftertreatment with DOC – diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst Emission standard: Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare cooling package 305 litre fuel tank Kdedpfxewmbg So Akxjk

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024_____Basic equipment / technical data ENGINE Max. power 180/245 kW/hp (ISO 14396) Max. torque 1100 Nm Maximum output with power management 194/265 kW/hp Max. torque with power management 1178 Nm 6-cylinder, 7.4L AGCO Power - 74 LFNT-5D, CR, 4V Emissions standard (DOC+SC+SCR) without exhaust gas recirculation Stage 5 Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare radiator package Additional fuel pre-filter with water separator 500-liter fuel tank Kdjdpfx Aksvv Dp Njxjk

Condition: used, mileage: 60 km, power: 77 kW (104.69 HP), first registration: 04/2023, fuel type: diesel, overall weight: 3,140 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,494 mm, loading space length: 3,350 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 89419 Errors and prior sale excepted!----SPECIAL EQUIPMENT * Seat Package 15: Driver’s seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Height-adjustable headrests - Integrated tray in the double passenger seat (fold-out) - Seat heating for driver and passenger - Inner armrest for driver - Manual lumbar support (driver’s seat) - Seat upholstery: fabric OTHER EQUIPMENT * 1 Battery * Driver’s side airbag * Anti-lock braking system with electronic brake-force distribution incl. ESP with traction control - Hill start assist - Side wind assist - Emergency brake assist - Rollover protection - Emergency brake support incl. emergency braking light * Battery runtime, programmable battery runtime up to 10 min * On-board computer with consumption and mileage info (e.g., remaining range) and outside temperature display, as well as Ford ECO-Mode * Double-wing rear doors with 180° opening angle (without windows) * Power windows in front - with quick-down/up function for the driver’s side * Ford Easy Fuel * High-performance alternator * Lockable glove compartment with cover * Interior lighting with delay, including front reading lights * Front air conditioning including dust and pollen filter * Fuel tank 70 l * Cargo area lighting * Steering wheel: synthetic leather * Steering column adjustable for height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Technology Package 9 - Heated windscreen - Rain sensor wipers - Park pilot system front and rear - Active emergency brake assist (camera-based) - Lane keeping assist with driver fatigue alert and high beam assist, also with lane departure warning - Headlight assistant with day/night sensor - Cruise control - Fog lights - Ford audio system * Particulate filter: diesel particulate filter * Wheels: hubcaps * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 15 * Low-beam headlights: halogen headlights with daytime running lights * Sliding door entry light activates automatically when opened * Sliding door, right * Rear mud flaps * Side protective strips * Power steering * Seat belts - front seatbelt tensioners and force limiters * Start-stop system * Rear bumper with integrated step * Partition (plastic) at B-pillar height * Recirculation control * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control Kjdpfeyn Ub Rox Akxedk * Second key with remote control * Overhead storage compartment in front ...and much more.----Single owner. German specification. Errors and prior sale excepted. 2 years factory warranty from first registration (extendable on request). We gladly accept your vehicle as trade-in. Financing/leasing is possible with no down payment! Any further questions? We are happy to advise you! Despite ongoing checks, discrepancies between this vehicle and the above description cannot be ruled out, so we point out that the above vehicle description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. Only the agreements in the order confirmation or purchase contract are binding. The exact equipment list can be obtained from our sales staff. Please feel free to contact us.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Kdsdpfxswym Nfo Akxjk Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1706J-E93TAG2, General information Field of application: Construction Weights Empty weight: 4.103 kg Kedpfsx S Um Nsx Akxedk Functional Generator capacity: 310 kVA Other information Fuel consumption: 46.9 Liter / Hour at 75% Load Generator: FG WILSON LL5114N Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), mileage: 971,464 km, power: 310 kW (421.48 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: automatic, suspension: other, loading space length: 8,050 mm, loading space width: 2,460 mm, loading space height: 3,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, fog lights, parking heater, retarder, spoiler, tail-lift, = Additional options and equipment = - Aluminum fuel tank - Brake booster - Roof spoiler - Intarder - Air conditioning - Radio/CD player - Sun visor - Auxiliary heater = Notes = TRANSPORT TO ANTWERP €590 = Additional information = Ksdsyt Nglspfx Akxjdk Front axle: Steered; Suspension: Parabolic springs Rear axle: Twin tires; Suspension: Air suspension Unladen weight: 9,830 kg Payload: 9,170 kg Gross vehicle weight: 19,000 kg Technical condition: Very good Visual condition: Very good Reference number: 10