Used Es 750/150 Hl for sale (22,034)

Condition: good (used), Workbench, work table, assembly bench, electrician workbench -without: vise -with: Electrician test board -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Quantity: 5 pieces available -Price: per piece Bodpfed S Unnsx Aa Dsdb -Weight: 110 kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette Bdjdpfxsb Eu Szj Aa Dsb -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm Bedpfxjb A Tdyo Aa Dodb -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 150 x 60 mm -Weight: 2,1 kg/piece Bdjdpfx Aajfzluzj Djb

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm Bodeb Hfagepfx Aa Dodb -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg

Condition: good (used), Lifting capacity 24t Ø98 x 315mm Bjdpfxsvwb Sdj Aa Dedb Stroke 150mm Cylinder Ø 56mm Bore Ø 27mm 238kN Around 130x available Shipping from 10 pieces

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Bedjycwk Repfx Aa Dedb

Condition: used, Year of construction: 2003, operating hours: 2,180 h, * Unladen weight: 7,090 kg * Power: 3.6 kW * Year of manufacture: 2003 * Working height: 15 m Bjdpfx Aajumrvbs Dedb * Electric drive -----Internal vehicle number: 10013----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 800457, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, The machine was completely overhauled in 2012. TECHNICAL DETAILS X-axis travel: 4,000 mm Y-axis travel: 3,400 mm Z-axis travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm Table load: 2 x 10 t C-axis swivel range: 0–360° (in 1° increments) A-axis swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS CNC control: Siemens 840D SL Axes: 5 controlled Bdedpfx Asx Uwnboa Dsb Total power requirement: 70 kVA Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm Note: The machine has already been dismantled.

Condition: new, Siemens 6FC9320-2BC Resolver measuring gear DM 2 / 150 i = 1 : 5 < unused > 100 % functional Bedpfxoi Ed Hke Aa Dsdb

Condition: new, Festo SLT-25-150-A-CC-B Mini slide 197916 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Bdodpsi D U Nnsfx Aa Dob

Condition: new, Festo SLT-25-150-A-CC-B Mini slide Mat.-No.: 197916 Series D802 with small parts kit 395853 unused, in opened original box, 100% functional Bsdpfx Aaoi D U Nrs Dsdb

Condition: used, Year of construction: 2001, operating hours: 36,589 h, functionality: fully functional, clamping force: 450 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 80 g, mold height (min.): 180 mm, opening stroke: 350 mm, plate width: 550 mm, plate height: 330 mm, installation height: 350 mm, The Engel ES200/45 HL Victory machine can be inspected at any time; the machine is connected to power and fully operational. Tie-bar-less design. Bsdpjx Ex Nbsfx Aa Djdb

Condition: ready for operation (used), Indramat KDA 3.2-150-3-A0I-W1 AC main spindle drive SN:237254-01029, used, normal signs of wear, 100% functional, scope of delivery as per photos. Bdjdjx Etxqjpfx Aa Djb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6300x1600x2600 mm Bodpsv A Huzofx Aa Dodb Weight 3000 kg Total power requirement 0 kw

Condition: good (used), workbench, work table, assembly bench -Workbench: with conductive tabletop and drawer unit -Width: 1500 mm -Depth: 750 mm Bodjb A Iztspfx Aa Dodb -Height: 780 mm -Drawers: 5 -Tabletop: with Anka-Plast coating -Number: 13 workbenches available -Price: per piece -Weight: 89 kg/unit

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Bdsdjx Eifkepfx Aa Dob Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: new, Knife grinder Motor: 2.2 kW / 2800 rpm, 220V, Capacity: 400-800 kg/h for fruit, 40-200 kg/h for dry material Screens: 4 pieces, according to request. Purpose of the machine: Pre-chopping and grinding. Suitable for grinding the following products: - Grains: wheat, corn, peas, pepper, caraway. - Pressed seeds: sunflower cake, soybean meal, pumpkin seed cake, linseed cake, poppy seed cake, etc. - Raw fruits and vegetables: pepper, plum, apricot, apple, quince, pear. - Dried fruits and vegetables: pepper, onion, garlic, raspberry, blackberry, apple, sour cherry, etc. Main components of the machine: Bodpfjxvxbcsx Aa Djdb - Frame - Safety switch - Motor 380V or 220V - Housing - Hopper - Sieve - Knives - Dosing regulator Available in stainless steel version.

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Bdsdpjd Ab Ilofx Aa Deb

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Table Dimensions: 2000 x 1000 mm Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Bjdehu H Dpjpfx Aa Dodb Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg

Condition: new, More technical data on request ht curtain manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to CE rules Bjdjd Ab Igepfx Aa Dedb press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Bsdpfx Aastqwtde Dsdb Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Year of construction: 2016, condition: ready for operation (used), Mini excavator EUROCOMACH ES 18 ZT YEAR 2016 acc. Counter 2.186 hours 1.750 KG 11,2 KW quick coupler MS 01 hydr. embankment bucket backhoe bucket hydr. adjustable undercarriage cabin with heating Bdsdpfxohq A Rge Aa Djb working light original paint good chains Selling price: 17.950,-- net Also favorable delivery possible !!!

Condition: good (used), Year of construction: 2005, operating hours: 50,888 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 22 mm, displacement volume: 38 cm³, injection weight: 25 g, mold height (min.): 150 mm, opening stroke: 333 mm, plate width: 470 mm, plate height: 280 mm, installation height: 330 mm, Engel ES 80/25 HLV machine in good condition. The machine is connected to power and can be inspected at any time. Tie-bar-less (holmlos). Bsdpfx Ajx Ex I Dea Dedb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8/300x1600x2600 mm Bdsdpfx Ajv A Hu Uea Dsb Weight 4000 kg Total power requirement 0 kw