Used Epsi Cip 400 - 300, 750Y for sale (29,230)

Condition: excellent (used), Year of construction: 2017, 2 x YOU JI TY 400 H Maximum turning diameter: 400 ∅ mm Maximum turning diameter: 250 ∅ mm Maximum turning height: 350 mm Maximum workpiece weight: 300 Kg Spindle speed: 4,000 rpm Tool turret (ATC): 8 Chip conveyor Iedpozlcvvofx Anzeig Coolant tank Weight: 5,500 Kg

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Iodpfx Aevcfhmsnzsig Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Iiodpfxezvdbue Anzog Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit Iiedezwb R Nepfx Anzsg - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Iiedopvlf Sepfx Anzsg Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,032 h, This 5-axis Sodick SLC400G was manufactured in 2014. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 250 mm. The machine also includes U/V travel of 150 x 150 mm. If you are looking to get high-quality wire EDM capabilities, consider the Sodick SLC400G machine we have for sale. Contact us for further details. • 5-AXIS: 5 • X-Axis: 400 mm • Y-Axis: 300 mm • Z-Axis: 250 mm Iedpfxjz Akrae Anzoig • U/V: 150 × 150 mm • Machine type: CNC Wire EDM • Year: 2014 • Made in: Japan • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm Iiedpfxjztc Dio Anzjg • Stop for punching • Including a wide range of dies and accessories

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection Iiodpfszxfg Rox Anzog • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Iijdpfozwmz Tox Anzeg Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Iodpezmap Aofx Anzsig Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis FANUC Robocut alpha C400iC was manufactured in 2024. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 255 mm. The machine has a permissible workpiece weight of 500 kg, making it suitable for various applications. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha C400iC machine we have for sale. Contact us for further details. • U-axis travel: 120 mm • V-axis travel: 120 mm • Permissible workpiece weight: 500 kg Iijdez A Ammspfx Anzjg

Condition: good (used), Year of construction: 2000, Degen FSM 300 Surface Grinding Machine High-quality precision surface grinding machine from the renowned German manufacturer Willy Degen, model FSM 300. The machine is characterized by its compact design and extreme precision, making it ideal for tool and mold making. It is perfect for workshops with limited space that refuse to compromise on accuracy. Extensive accessories & highlights included: Digital Readout (DRO): For precise operation and error-free infeed. Original extraction & wet grinding unit: Ready for immediate connection, ensuring a clean working environment and optimal workpiece cooling. Magnetic chuck: Pre-installed for immediate operation. Technical specifications (according to nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of manufacture: 2000 Power supply: 400 V / 50 Hz (three-phase) Power rating: 2.7 kVA / 5.6 A Control voltage: 24 V (secondary) "A complete solution from a single source: We would be happy to offer you suitable bank financing for your project." Iisdpfx Asznirijnzjg komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2024, Welding rotary table KT 300 Ijdpfebvk I Eex Anzsig Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot-operated remote control Additional cost: Quick-release chuck Diameter: 300 mm, €450

Year of construction: 2022, condition: used, Second-hand goods Year of manufacture: 2022 Features and technical specifications: - Enables one person to effortlessly load panels onto the platform frame and swivel it from the vertical to the horizontal position - For use with panel or sheet cutting saws, on a shelf or whilst moving between workstations Swivel frame with two-position locking mechanism in vertical and horizontal positions - Adjustment of the table to the desired working height via a foot-operated hydraulic system The design principle, featuring a smooth-running scissor mechanism, ensures that the platform can be raised and lowered in a perfectly parallel manner - Sturdy support rollers on the lower support and several all-round castors ensure smooth, ergonomic movement - Counterweight on the lower frame for a secure footing and maximum stability when moving the table - The foot pedal for the workstation table is fully accessible - Easy to manoeuvre thanks to four swivel castors with a diameter of 125 mm - Two castors fitted with brakes - The swivel frame can be fitted to and removed from the platform base frame in just a few simple steps - Complies with the safety criteria of EN 1570-1 - Load capacity: 300 kg - Table height: max. 1010 mm - Table height: min. 400 mm - Swivel frame width 1800 mm, length 1500 mm - Castor diameter 125 mm Iodpozk Nqdsfx Anzjig - Dimensions 1200 x 740 x 400 mm - Weight approx. 80 kg - Swivel frame weight: 10 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2008, machine/vehicle number: 22410, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, number of axes: 4, THE MACHINE IS CURRENTLY READY FOR SHIPMENT ON A TRUCK TRAILER. WE CAN ARRANGE DELIVERY FOR €2.00/KM. THE BUYER IS RESPONSIBLE FOR ORGANIZING AND PERFORMING THE UNLOADING. IMA BIMA 300 CNC Machining Center Offered is a fully functional IMA BIMA 300, 4-axis CNC machining center in a console table design. Basic data (no guarantee of accuracy and completeness): Machining area: X-axis: approx. 5000 mm Y-axis: up to approx. 1400 mm Max. workpiece height or clamping height: approx. 125 mm Machine weight: approx. 6000 kg Main spindle: Power: 7.5 kW (S1) / 10 kW (S6) Tool holder: HSK F63 Speed range: up to 24,000 rpm Programmable clockwise/counterclockwise rotation Tool and machining units: Tool changer (disc changer) with approx. 18 magazine slots CNC-controlled C-axis (360° rotatable) Drilling unit: Isdpfx Aszq U Rienzjig Vertical and horizontal drilling spindles Integrated nut saw Mount for various adapter units Table system / Clamping technology: Console table with approx. 6 adjustable support arms and several suction plates (vacuum clamping system) Two vacuum circuits, positionable depending on the workpiece External vacuum pump from Becker available (see images) Control and software: ICOS CNC control Programming via IMAWOP (dialog-oriented, graphical interface) PC-based control with network connection Additional equipment: Central lubrication of the linear guides Extraction connection (Ø 250 mm, approx. 4950 m³/h) Safety equipment according to CE with protective grilles and safety mats (some mats may have intermittent contact) Documentation and spare parts catalog incomplete Electrical data: Mains connection: 400/230 V, 50 Hz, 3N/PE We are available at any time to answer questions or arrange a viewing appointment.

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bulkheads and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg Max. load per shelf 200 kg with uniform distributed load 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Iisdpfx Anevmxuhozsg Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms Ijdpfozf A Ifjx Anzoig • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Iodpek Abgcjfx Anzjig Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Almost new machine. Only 2 spools of welding wire have been used with it in total. It is in perfect condition and has served as a backup unit. Ijdpsyxf R Sofx Anzoig

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg Ijdpfx Anoq Nqkxjzeig CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), functionality: fully functional, MESUTRONIC MN 5.0 CI 400/200 | Metal Detector / Metal Detection System with Conveyor Belt Manufacturer: MESUTRONIC Gerätebau GmbH Model / Type: MN 5.0 CI 400/200 Iisdjzhgtwjpfx Anzsg Serial Number: 930217 - CI Power Supply: 100 - 240 V, 50/60 Hz Current Consumption: 50 - 300 mA Ingress Protection Rating: IP 66 (detection head) IP 65 (control panel) Belt Width: 350 mm Aperture Dimensions: 400 x 160 mm Dimensions: 1650 x 840 x 1130 mm Conveyor Type: Plastic belt The professional Mesutronic MN 5.0 CI metal detector is a technologically advanced inspection device designed to meet the stringent safety standards of the food, processing, and baking industries. The detector's primary function is to precisely identify metallic contaminants (both ferrous and non-ferrous metals, as well as stainless steel) in products transported in bulk or in individual packaging. This effectively protects consumers and safeguards subsequent machines in the production line from costly breakdowns. The core of the device is a highly sensitive tunnel head connected to an intuitive digital control panel, the Mesutronic PK 01. The system features excellent product effect compensation (the influence of product moisture, salt, or temperature on the reading), which minimizes the risk of false alarms. The machine is ideal for meat processing plants, fish processing plants, slaughterhouses, delicatessen plants, and automated packaging lines, where maintaining continuous quality control is crucial. A stable conveyor belt with a width of 350 mm ensures smooth and uniform product feeding through the detection window with an aperture of 400 x 160 mm.

Condition: good (used), Year of construction: 2008, HIGH SPEED VERTICAL CENTER 42,000 RPM MACHINE PREPARED FOR LOADING AND UNLOADING PALLET OR PIECE THROUGH FANUC ANTHROPOMORPHIC Producer EXERON Model DIGMA HSC 300 Year 2008 Used condition Location/Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 2.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 3.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 4.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 5.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 6.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 7.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 8.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 9.jpg /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/PHOTO-2022-10-25-22-19-25 /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/ /Users/giovanni/Desktop/Foto Usati 22/Digma HSC 300/Unknown.jpeg Villorba, Italy Price Category Vertical Machining Centers Subcategories Stock number 634 Serial number HEIDENAIN 530 steering unit Table size 470 X 400 X axis (strokes) 400 Ijdpoizt Acjfx Anzjig Y-axis (travel) 320 Z axis (strokes) 300 Spindle power KW 13 Maximum rotation speed 42000 Maximum tool magazine capacity 40 HSK 40E tool holder X-axis rapid traverse (rapid traverse) 30M/MIN Y-axis rapid traverse (rapid traverse) 30M/MIN Z-axis rapid traverse (rapid traverse) 30M/MIN 3 R SYSTEMS pallet changer Renishaw system RMP 60 READY Description HIGH SPEED VERTICAL CENTER 42,000 RPM MACHINE PREPARED FOR LOADING AND UNLOADING PALLET OR PIECE THROUGH FANUC ANTHROPOMORPHIC

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Iedpfxjzvl S Is Anzjig

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Dimensions: see photos -Number: 2x prism block available -Price: per piece -Dimensions: 400/300/H180 mm Ijdjzn I Rkepfx Anzsig -Weight: 27.9 kg

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Iedpfx Anexy Tmujzjig