Used Eppinger Toolholder for sale (256)

Condition: new, neu Bulgarien 64180 € 1213 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) Iasdsyq Sm Nopfx Aa Ejw 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm € 62160,00 turning length3.000 mm € 686,00 turning length4.000 mm € 74540,00 turning length5.000 mm € 90020,00

Condition: new, neu Bulgarien 26210 € 500.61 € 325 mm 750 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 2 85-405; 470-2200 U/Min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 0.1 - 1.75 70 - 4 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard Iedpfxjyq Sngo Aa Eoaw levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,-

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm Iajdpfxoyq Sm Ao Aa Eew € 129500,00

Condition: new, neu Bulgarien 114970 € 2172.93 € 890 mm 3000 mm 400 mm 155 mm Iaodpfowirxqjx Aa Ejw 490 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 100,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 mm € 151900,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien Iajdpfx Aaexzuu Aj Eow 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, neu Bulgarien 56920 € 1075.79 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 21 12,5 - 1250 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout Ijdpfx Aewirv Aja Eeaw quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning length5.000 mm € 82750,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 86980 € 1643.92 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection Ijdpfx Aajwiq Rxo Eeaw safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 72870,00 turning length2.000 mm € 75900,00 turning length4.000 mm € 93390,00 turning length5.000 mm € 106 160,00 turning length6.000 mm € 120230,00

Condition: new, neu Bulgarien 81780 € 15.64 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg Iedpfowiq Rrox Aa Esaw driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning length2.000 mm € 70700,00 turning length4.000 mm € 88290,00 turning length5.000 mm € 101060,00 turning length6.000 mm € 115130,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 46970 € 897.13 € 500 mm Iaodpfjwiq Rfsx Aa Eow 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 MK 21 20-2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53450,00 turning length4.000 mm € 59360,00 turning length5.000 mm € 74840,00

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 50210 € 948.97 € 1 Iaedpfxjwiqz Do Aa Esw 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: new, neu Bulgarien 128710 € 2432.62 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection Iaedpfx Aaswiqwfs Eow safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length6.000 mm € 165640,00

Condition: new, neu Bulgarien 121770 € 2301.45 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 MK 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) Iaedpfswiqv Uex Aa Eow 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 turning length4.000 mm € 130410,00 turning length5.000 mm € 141610,00 turning length6.000 mm € 158700,00

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report Iedpfjy N Spcjx Aa Eeaw • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t Iedetv Iibepfx Aa Eoaw dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Year of construction: 1997, condition: good (used), Ibarmia CNC machining center offered. Type: ZVL 3000 Control unit: Heidenhain TNC 426 CB X-travel: 2200 mm Y-travel: 800 mm Iaodpfx Aash Hp Uns Eow Z-travel: 600/800 mm Table: 850 x 2600 mm Weight on table max: 3500 KG Spindle: SK 40 with cooling Speed max: 4000 RPM Toolchanger: 40 pieces Power: 47 KW Included: documentation, parameters, toolholders, chip conveyor and central lubrication system Year: 1997 Dimensions: 625x305x340 cm LxWxH Weight: ca 12000 KG Movie available! For more information call us or send an e-mail.

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min Isdpfx Aszcmccea Eeaw main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: new, Year of construction: 2026, Universal Milling Machine UWF120 SERVO with Independent Spindle Drive: Exceptional Machining Flexibility Our Universal Milling Machine UWF120 SERVO is an innovative solution for a wide range of milling operations. Servo motors on the X, Y, and Z axes, along with an independent vertical spindle drive, enable precise milling at various angles. The handwheel for accurate tool positioning and smooth movement makes operation intuitive and efficient. Its solid and heavy-duty construction ensures stability even during demanding machining tasks, while guaranteeing long-lasting machine life. Machine characteristics The cast-iron body ensures vibration-free operation, contributing to high machining accuracy. Protective covers in accordance with the latest safety standards ensure safe operation. Schneider Electric electronics and SERVO drives guarantee not only machining precision but also operational safety. The digital display and ergonomic control panel make the milling machine easy and intuitive to operate. Technical data Maximum face milling cutter diameter 25 mm Table dimensions 1500x320 mm Table travel X/Y/Z 1000/320/340 mm Distance from spindle face to table 90–430 mm Distance from horizontal spindle axis to table –130 to 300 mm Distance from spindle axis to column 400–800 mm T-slot width, spacing, and number 14 mm / 70 mm / 3 pcs Spindle speeds 45–1660 (V–11) rpm 34–1320 (H–12) rpm Table feed 25–595 mm/min (8) Spindle taper Iodpezfgf Uefx Aa Esaw ISO40 Supply voltage 400V Motor power 2.2kW (V); 3kW (H) Weight 2,100kg Overall dimensions (LxWxH) 1630x1700x1950 mm Standard equipment: 3-axis digital readout Servo drive ISO40 toolholder with ER32 collets 4, 5, 6, 8, 12, 14, 16 Reduction sleeve ISO40/MK4 Reduction sleeve ISO40/B16 Drill chuck 3–16 mm B16 Vice 160 Lighting Cooling system Central lubrication system Feed for X, Y, Z axes Tool set User manual CE Declaration of Conformity

Condition: used, Year of construction: 2001, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 2001 Control : Heidenhain MillPlus Speed : 18000 rpm Movement X/Y/Z : 630/560/560 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):119 Nm Taper:SK40 Workingtable: Clamping surface:1.000 x 600 mm Tableloading (max.):400 kg In general: Toolmagazine:2x 10 stations Rapid travers in X/Y/Z:26/26/20 m/min Equipment/Accessory: Chipmanagement:Chiptrumpet Coolingmanagement:Cooling unit Oilmistseparation:Mechanical extraction, Hör AFS 1100 4.-Axis:Magerl Rotomatik 120 with Counterbearing Processobservation:Operation mode 4 Setup operations:Electronical handwheel Further Equipment:Spindlechiller, Rinsing pistol Iasdpfezbzchox Aa Eow Further Accessory:Misc. used Toolholder SK 40

Condition: used, Year of construction: 1999, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 1999 Control : Heidenhain MillPlus Speed : 12000 rpm Movement X/Y/Z : 800/650/550 mm Spindle: Technology:Motorspindle Iedpfx Aajzbzcbo Ejaw Speed:12.000 rpm Power (max.):15 kW Torque (max.):130 Nm Taper:SK40 Workingtable: Clamping surface:1.100 x 650 mm Tableloading (max.):600 kg In general: Toolmagazine:25 stations Rapid travers in X/Y/Z:18/18/15 m/min Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Coolant pump Oilmistseparation:Electrostatic extraction, W+W EL-FI 1000 Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Iasdpjwix E Rsfx Aa Ejw Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Year of construction: 2022, condition: excellent (used), 5-axis Machining center Iajdpfxeu A Uq Is Aa Eew independent clamp movement 16 positions tool magazine chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm automatic greasing kit extra blade unit 90° on moveable carriage wireless bor code reader

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes Iodszbilqopfx Aa Ejaw

Condition: ready for operation (used), Year of construction: 2022, operating hours: 215 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. - Control: OSP-P300LA- Spindle Speed: 5,000 rpm- Spindle Power: 22 kW- Spindle Nose: ASA 6" (80 mm bore, without drawbar)- Bar Capacity: 52 mm (Kitagawa SR1453 cylinder)- Spindle Orientation: Electric- Y-Axis Travel: 120 mm- C-Axis Rotation: 360° (0.001° increments)- Turret: 12-position radial, motorized- Turret Motor Speed: 6,000 rpm- Turret Motor Power: 7.1 kW- Tailstock: CM5 (500 kgf thrust, rotating center)- Tool Holders: Eppinger live/static tool holders- High-Pressure Coolant Pump: 0.8 kW, 6 bar, 20 l/min- Tool Presetting: Manual- Programming: Plain text dialog IGF- Chip Conveyor: Enomoto hinged belt type chip conveyor with external control box- Voltage: 400 V- Number of Phases: 3 P- Frequency: 50 Hz- Max Power Consumption: 33.1 kVA- Total Current Consumption: 47.8 A- Max Motor Current: 154 A- Control Cabinet Short Circuit Strength: 2.5 kA- Machine is a Showroom machine Ijdpfx Aajza E H Us Esaw Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop Iaedpfow Sdr Hex Aa Eow

Condition: good (used), 1 used lead and feed screw lathe Ijdsw Rcrcjpfx Aa Ejaw Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix