Used Eckold Fwr 1307 X for sale (61,073)

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m Bljdpfsfg E Hpox Amron The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Bsdpfxefrzvze Amrsln Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 40000 kg length 8000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm dimensions 9,9 x 3,0 x 0,9 m Bsdpfsfrzwfox Amrsln Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 40000 kg length 9000 mm width 3000 mm height 850 mm lenkbar lenkbar size of tyres 540 x 300 8-fach mm dimensions 10,9 x 3,0 x 0,9 m Heavy load trailer with Blodpefrzwiofx Amron - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 80000 kg length 12000 mm width 3000 mm height 1100 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm Bjdpfxefrzwqe Amrsln dimensions 13,6 x 3,0 x 1,1 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us.

Condition: excellent (used), mileage: 512,000 km, power: 375 kW (509.86 HP), first registration: 12/2018, fuel type: diesel, axle configuration: 8x8, wheelbase: 6,800 mm, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 10,150 mm, total width: 2,550 mm, permissible axle load (axle 1): 11,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2018, Equipment: air conditioning, electric window regulation, navigation system, parking air conditioner, trailer coupling, = Additional Options and Accessories = - 2-pedal control - All-wheel drive - Heated mirrors - High beam headlights Bsdpez Hw R Isfx Amrsln - Air-suspension seats - Air horn - Radio/CD player - Rain sensor - Rotating beacon - Rear-view camera - Sun visor - Toolbox - Xenon lighting - Central lubrication system - Tow hitch = Notes = 8x8 Euro 6 Hyva tipper, 22 m³ Hydraulic cover flaps Valid TÜV (technical inspection) until 01.05.2027 In very good condition! Ready for immediate use 2 units in stock = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Maximum front axle load: 11,500 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 11,500 kg Rear axle 3: Max. axle load: 11,500 kg Weights Unladen weight: 20,800 kg Payload: 28,200 kg GVW: 49,000 kg Functional Body manufacturer: Hyva Tipper 22 m³ with flaps Tipper: Rear Maintenance, History and Condition APK (technical inspection): valid until 01.2027 Technical condition: very good Optical condition: very good Identification License plate: 46-BLR-9

Condition: used, Cast iron bed Bodpez H Ixcjfx Amroln Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Bljdpfx Aoz H Ixismrjn Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T

Condition: used, Steel floor plates Bodpfxsz H Iyyj Amrsln Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: used, Pair of cast iron angle plates Height: 3000 mm Width: 1000 mm Bodpfx Aez H I Abjmrsln Depth: 1245 mm Weight: 3 T / unit

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Blsdez H I Anjpfx Amron Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, 3 x Fässler deburring machines Blsdpfx Aoz H Ridsmron Individual sales possible.

Condition: used, mileage: 181,811 km, power: 130 kW (176.75 HP), first registration: 03/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, loading space length: 3,100 mm, loading space width: 2,030 mm, loading space height: 350 mm, Year of construction: 2011, Equipment: parking heater, * Vehicle number for customer inquiries: 4849 * Entry-level swivel door on the right with sliding window * Differential lock, rear axle * Environmental badge (green) * Double seat for passenger compartment, right side * Trailer coupling, ball-type, low * Cross member reinforced, without trailer coupling * Auxiliary water heater * Double seat for passenger compartment, left side * Passenger seat, two-seater * Engine type Euro V * Entry-level swivel door on the left with window * Airbag, driver * Driver's seat, hydraulically adjustable, "Isringhausen" Bedpez H Dw Uofx Amroln * MB-NA 56-2c, i=0.98 - left of the main shaft * Electric windows, driver and passenger side * Trailer socket, 13-pin * Trailer socket, 7-pin * Entry-level swivel door on the right with window * Five-seater * Engine brake, pneumatically operated * Tachograph, digital, EG * Exterior mirror, electric, driver's side * Stabilizer, rear axle, reinforced, mounted under the frame * Tilting bridge 3100x2200x350 * Driver comfort package * Meiller pump, 5-piston, type 254/1 * Brake system: hydraulic 2-circuit/pneumatic 2-circuit * 4/5-door No liability for printing and typographical errors. Sales only to commercial customers. Subject to errors and prior sale. *Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer. * Guarantee insurance can be arranged with the insurance company upon request. * TÜV/UVV LBW/Tachograph inspection and installation of OBU device by our local partners. * Customs license plates for 30 days. * All customs documents for export are available, but must be requested individually. * TOLL fees for Toll-Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * Over 200 vehicles constantly in stock.

Condition: used, mileage: 419,200 km, power: 175 kW (237.93 HP), first registration: 06/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,780 mm, Year of construction: 2013, Equipment: air conditioning, parking heater, tail-lift, * Mercedes Benz 1824 L AXOR with multi-chamber refrigerated box body, Carrier Supra 950 - BÄR LBW 2. * Diesel - Engine displacement: 6,374 cc - 175 kW / 240 hp - Euro 5 - Green emissions sticker - * Body dimensions: Length 7,700 mm x Width 2,600 mm x Height 2,330 mm and 2,100 mm interior height - Wheelbase: 4,900 mm - * 2 seats - Automatic transmission - Air conditioning - Suspension: leaf / air - Tow hitch (only drawbar coupling) - Axle configuration: 4x2 * Retarder - Permissible total weight: 18,000 kg - Unladen weight: 10,550 kg - Payload: 7,450 kg - * Truck 1: 1824 L - Registration date / Mileage: 400,500 - VIN: WDB 9505361L652633 - 144 - 2,330 mm interior height * Truck 2: 1824 L - Registration date / Mileage: 513,750 - VIN: WDB 9505361L752647 - 116 - 2,100 mm interior height * Truck 3: 1824 L - Registration date / Mileage: 422,750 - VIN: WDB 9505361L756551 - 119 - 2,330 mm interior height * Truck 4: 1824 L - Registration date / Mileage: 419,250 - VIN: WDB 9505361B980262 - 151 - 2,330 mm interior height * Vehicles are immediately available and ready for collection - Vehicles are not labeled - * Please schedule an appointment for viewing - Price is per vehicle - * Contact: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. Bjdpfxozd Irao Amreln * Subject to change, errors and prior sale. Special equipment: Wheel bolt cover, storage compartment on engine tunnel, trailer coupling: drawbar coupling, audio system: CD radio, battery 220 Ah, compressed air tank aluminum, cab: comfort suspension (1.8 HZ), cab version: S (short with extended rear wall), generator 100 A, graphic info display with eco meter, rear lights for mounting tail lift, air dryer 1 chamber heated, spare wheel jack side-mounted, switch tail lift, circuit breaker, seats in cab: driver's seat comfort suspension seat incl. horizontal suspension, voltage converter 24V / 12V 15 A, steel rims 9.00x22.5, 12-volt socket, cab socket 24V, front underrun protection, preparation for cool box / refrigerator, preparation for telephone / fax, front axle dropped, thermal protection glazing, auxiliary heater (air) Additional equipment: Emission standard EURO 5, axle configuration: 4x2, axle load front axle 7.5 t, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, left, outside temperature gauge, long-distance cab, roof hatch (steel), differential lock rear axle, cab: S (short), suspension: leaf / air, power windows, gearbox 6-speed - type: G 85-6, urea tank (AdBlue): 95 liters, rear axle H 6, crown wheel 440, interior filter: pollen filter, body / structure: chassis, fuel tank: 210 liters plastic, model update Axor 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, spare wheel under frame end, disc brakes, seats in cab: passenger single seat, fixed, stabilizer rear axle, stabilizer front axle, Telligent brake system with ABS + ASR, rear underrun protection fixed, immobilizer, permissible total weight 18.00 t

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES Y1, Y2, X + V The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention Bjdszg H Ewjpfx Amrsln ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, capping head for BVS 30 x 60 price / pcs. Bedpfx Amjz Ibwzjroln short or long shaft

Condition: used, mileage: 25,000 km, power: 162 kW (220.26 HP), first registration: 03/2024, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,800 mm, loading space width: 23,550 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, We are delighted that our offer has piqued your interest and assure you that you can purchase a good and affordable vehicle with a transparent service history from us! MAN TGL 8.220 with Meiller three-sided tipping body Blsdpfxoz If Iws Amrsn AIR CONDITIONING TOW HITCH, PIN TYPE TOW HITCH, BALL TYPE ALL-ROUND LIGHTING RAISED FRONT PANEL WITH PROTECTIVE GRILLE DIFFERENTIAL LOCK 3 SEATS LANE KEEPING ASSIST GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desired, we will gladly provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TECHNICAL INSPECTION / PERIODIC TECHNICAL INSPECTION / UVV LBW / LGS INSPECTION / Tachograph inspection / Installation of OBU device and service by our AUTHORIZED WORKSHOP. TOLL / ROAD TOLLS Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Bodjz Ig I Ejpfx Amrsln Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: as good as new (ex-display), Carbide milling cutter Manufacturer: Prototyp Blsdedwbklepfx Amrjn H 4 1200 17 -10 -2 10 x 22 / R 2 2 pieces available

Condition: as good as new (ex-display), End milling cutter for cylindrical surfaces Bledpfjdwblbox Amron Manufacturer: Strasmann 150 x 95 NR HSS CO 10 Spiral: 800 mm 545214

Condition: excellent (used), Touch panel Space requirements: Width: 600 mm Depth: 500 mm Blsdpog Af U Ejfx Amron Height: 90 mm

Condition: good (used), Quadruple steel holder Steel height: 60 mm Dimensions: L. 190 x W. 185 mm Bodpfx Asdcwzujmroln

Condition: excellent (used), Year of construction: 1961, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm Blsdpswfpiljfx Amron -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Bljdpsz Dh S Rjfx Amren Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Bsdpfxexf Uqlj Amrjln Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Weight: 115 kg