Used Donau Donauflex 135 for sale (1,889)

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Knodpfx Aewm Iy Eonuoc Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Knsdpoyyqtuefx Anujc Cooling: Water with corrosion protection Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,088 h, load capacity: 1,350 kg, lifting height: 5,500 mm, free lift: 1,680 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, drive type: Elektro, Operator stand-on forklift Mast type: Triplex Knedpfeyn Tnpjx Anuec Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery year: 2022

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: SLM06EC01-R1, workpiece weight (max.): 5,000 kg, EMC Model 1350 HHH Giant Brush Sanding Machine - Never Used Premium high volume sanding machine made in Italy. Installed and tested, but was never implemented into production. Working width: 1.35m Working thickness: 3mm to 150mm CE and CSA Standards Line machine: 900mm from floor. 3 sanding brush groups 3 zones x 11 brush heads = 33 brush heads Kodpfx Aewrrchsnusnc 200mm Disc diameter 3 x 15hp gear driven motors independently housed inside the machine's basement. Welded monocoque type frame, made in heavy duty carbon steel construction for production setting. Inverter controlled oscillation 70 to 140mm Inverter controlled rotation speed 280 to 1100 rpm Inverter controlled feed belt for variable feed speeds 0.5 to 8 m/min Adjustable vertical pressure stroke 50mm Each zone of brushes have discs on 2 staggered rows (6 and 5) Automatic feed belt centering device. Soundproof protection on all doors. Premium components - ball screws, rubber parts, electronics, pneumatics, etc. Quick tool changer locking device for all 33 spindles Vacuum holding system (5.5hp) under machine with short pipes and no curves. Turbo blowers for piece and feed belt cleaning. Programmable and active by the working piece. Extra sanding brushes: two full sets of wire stock removal brushes for rustic finishing, one set of sanding heads for finish sanding, and one set of Tynex brushes for contoured / raised sanding. All controlled and programmed by touch screen - fully computerized machine with customizable programs. 575v, 3ph (RT Can Help Source a Transformer for US-Voltage if Need Be

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - Plywood walls - 4x lashing eyes - Lashing rails Net: €2,647.06 / Gross: €3,150.00 Kedex Tix Njpfx Anusnc Article number: BTP175241315.01 Technical data: • Brand: Blyss • Model: F752413.11D • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 248 x 135 x 150 cm • External dimensions (LxWxH): 405 x 189 x 205 cm • Loading height of the floor: 55 cm • Permissible total weight: 750 kg • Unladen weight: 350 kg • Payload: 400 kg • Chassis: Low loader (wheels next to the body) • Tires: 165/70R13 • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes • 100km/h approval: Yes DESCRIPTION • Reinforced, stable, bolted V-drawbar • Hot-dip galvanized frame • Floor panel made of 15mm multiplex • Body made of plywood - plastic-coated walls • Roof made of plywood • 2-leaf rear door with twist-latch lock • 2x maneuvering handles at the front • 4 lashing eyes embedded in the floor • Lashing rails mounted on both sides on the same level, h= xx cm • Forced ventilation on the side walls: 2x interior fans • Maintenance-free rubber spring axles from KNOTT • Includes 100 km/h manufacturer approval • 2x supports at the rear for safe loading, even when not hitched • Steel fenders • 13-pin plug • Reversing light • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Jockey wheel _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, side door Equipment: - 6 lashing points - Lashing rails - Plywood walls Net: €3,941.18 / Gross: €4,690.00 Article number: BTP113261315.04 Technical data: • Brand: Blyss • Model: F1326HD • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 262 x 135 x 150 cm • External dimensions (LxWxH): 419 x 189 x 205 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Unladen weight: 495 kg • Payload: 805 kg • Chassis: Low-loader (wheels beside the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced, bolted V-drawbar • Hot-dip galvanized frame • Floor made of 15mm multiplex • Body made of plywood - plastic-coated walls • Roof made of plywood • 2-wing rear door with twist-lock closure, lockable • 2 maneuvering handles on the front • 6 lashing eyes recessed in the floor inside • Lashing rails mounted on both sides inside at the same height, h = xx cm • Forced ventilation on the side walls: 2x internal fans • Maintenance-free rubber spring axles from KNOTT • Shock absorbers incl. 100 km/h approval • Side door on the front right, lockable from the inside and outside • 2 supports on the rear for safe loading even when not hitched • Reversing automatic • KNOTT overrun device and parking brake • Plastic fenders • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light Kedpfxox Tvgyo Anusnc • Lighting recessed in the rear frame • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about any special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Kodeiivc Dspfx Anujnc Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Knodpoznvp Ijfx Anuoc Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Kedpfxottbd No Anuonc

Condition: new, A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Spring return of sawcarriage. 350mm max. sawblade dia. 2KW brake motor. 30-40mm dia spindle dia. 45 - 90 - 25 degree horizontal movement (swivel) Adjustable upper protection 350mm dia TCT sawblade - 72 teeth. Cutting capacity: 350mm x 135mm deep at 90 degrees. 250mm wide x 135mm deep at 45 degrees (swivel). Knedpfsdy Hm Eex Anujc Dust extraction outlet 100mm Working height of table 900mm 'N' model with vertical tilting. 90-45 degrees tilt to left. Max capacity 350mm wide x 92mm deep.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Ksdpfxezkmqns Anuenc Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg Originally installed in an Airbus production facility and used for precision trimming and milling of aircraft fuselage window openings. The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 500 g/m², paper width (min.): 98 mm, paper width (max.): 330 mm, paper height (min.): 148 mm, paper height (max.): 1,300 mm, number of feeding trays: 4, total length: 4,582 mm, total width: 1,165 mm, total height: 1,465 mm, space requirement length: 5,582 mm, space requirement width: 1,875 mm, counter reading (black): 60,000, counter reading (color): 1,700,000, type of input current: three-phase, input current: 16 A, input voltage: 230 V, Equipment: auto duplex, raster image processor, Canon imagePRESS V1350 digital printing press Ksdpfszhl Tpjx Anusnc Equipment: PRISMAsync for iPR V1350-A1 High Capacity Stacker-J1 POD Deck-E1

Condition: used, Year of construction: 2020, Cutting capacity 1350mm Knsdpfx Aozmmdysnuoc Automated backstop digitized 6700mm Maximum rapid travel speed 60m/min

Condition: ready for operation (used), Bosch CNC CP / MEM 5 / G107 / 913572 CPU module, SN:001028510, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ksdpfx Aox Eqxbenuonc

Condition: ready for operation (used), Bosch CNC CP /MEM 5 / G107 / 913572 CPU module card, used, in good condition, 100% functional, scope of delivery as per photos. Kedpfx Anjx Eqxhsuenc

Condition: ready for operation (used), Festo DNG160-1350-PPV-A standard cylinder 33024, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and shipping separately! Knedpfox Ermmox Anuoc

Condition: ready for operation (used), Heidenhain / Gildemeister VAP4 AES 2 / IN9853603 control board SN:6135032 from Gildemeister CXT 600, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Knjdpfx Anex Errisuec

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Kedex Ev Tkjpfx Anuonc Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: new, Dunkermotoren GR42x40 SNR: 88427 06301 + gearbox PLS 42S / 88859 01813 Serial number: 5011135592, unused, 100% fully functional, delivery as per photos. Kedpfsy Nn Nrsx Anuenc

Condition: ready for operation (used), Heidenhain UE 210 ID 313500-03. The costs refer exclusively to the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and will receive a 3-month warranty from us. Kodoy Nquqspfx Anuonc

Condition: ready for operation (used), Heidenhain UE 212 ID 313501-01. The costs stated cover only the repair analysis of your component, which you can send to us. After we have inspected your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and will receive a 3-month warranty from us. Knodpfx Ansy Nqx Aouec

Condition: ready for operation (used), Heidenhain UE 212 ID 313501-12 The costs stated refer only to the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis costs will be waived. As part of the repair, your component will be fully overhauled and covered by a 3-month warranty from us. Kodpfx Ajy Nqygenujnc

Condition: ready for operation (used), Heidenhain UE 240 ID 313502-02 The costs stated cover only the analysis for repair of your component, which you may send to us. After a thorough inspection, you will receive a detailed quotation specifying the actual repair costs. If you authorize the repair, the analysis fee will be waived. As part of the repair process, your component will undergo a complete overhaul and will come with a 3-month warranty from us. Kodpfx Aoy Nq Azonujnc

Condition: ready for operation (used), Heidenhain UE 240 ID 313502-03 The costs cover only the repair analysis of your component, which you can send to us. After we have inspected your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Kedpoy Nq A Iefx Anuonc

Condition: ready for operation (used), Heidenhain UE 242 ID 313503-03 The costs include only the repair analysis of your component, which you may send to us. After assessment of your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. During the repair, your component will be fully overhauled and will receive a 3-month warranty from us. Ksdpfxjy Nq Hgj Anuonc