Used Donau Donauflex 135 for sale (1,873)

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Dwjdpfx Alszgvmqj Aoc Condition: Very good, used but like new Available immediately from stock.

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Dwsdpfx Aey Rfzuel Asc Please contact us if the gear stages are no longer functioning correctly as intended.

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard Dodpfx Alszza Nxe Aowc

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm Dwodoz Dz Rtepfx Al Aoc

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Dwodpfx Aoy Nd T Hsl Aec Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor Djdexn A Spspfx Al Aewc • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: like new (used), Suitable for your Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Dwodpfjy Ri Hnjx Al Aoc

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Milling machine Year of construction: 2025 Work table, clamping surface: mm 1500 x 1000 Table height: mm 750 Number of T-slots: 7 Size of T-slots DIN 650: mm 18 Travel distances X-axis: mm 1500 Y-axis: mm 1000 Z-axis: mm 700 Distance: Table top edge - Spindle bottom edge min/max: mm 150 / 850 Main spindle drive for speed 8000 min-1 Tool holder: SK 40 Dedpfezvbausx Al Aswc AC motor, frequency-controlled: kW 26 at 44% duty cycle Speed range: min-1 15 – 8000 Torque: Nm 245 Coolant system Band filter system Feed drives X-axis AC servo motor: kW 3.5 Y-axis AC servo motor: kW 2.0 Z-axis AC servo motor: kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect position measurement system. Accuracy Positioning accuracy X and Y axes over 1000 mm: mm ± 0.0150 Repeatability X and Y axes: mm ± 0.0075 Positioning accuracy Z axis: mm ± 0.0150 Repeatability Z axis: mm ± 0.0075 Tool magazine, 24-position mounted on the left side of the machine - Tool positions: 24 - Tool shank (DIN 69871 / 69872): SK 40 - Max. tool diameter: mm 76 - Max. tool length: mm 250 - Max. tool weight: kg 8 Machine control: Heidenhain iTNC530 Ex works, unloaded, plus statutory VAT. No guarantee.

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev Dwjdpfx Aozwftzsl Aoc - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: used, Donau DR52 Dodpfsz D U Tzex Al Aswc Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, quill travel distance: 200 mm, table length: 1,200 mm, table width: 600 mm, drill spindle length: 200 mm, overall weight: 1,700 kg, input voltage: 400 V, travel distance Y-axis: 780 mm, input frequency: 50 Hz, distance table to spindle center: 800 mm, Donau DR40 Z Manufacturer: Donau Machine type: Radial drilling machine / Quick-change radial Designation: DR40 Z Year of manufacture: 1992 Drilling capacity: 40mm Threading capacity: M33 in steel Taper: SK 40 Feed rate: 0.075 - 0.15 – 0.3 – 0.45 – 0.6 / revolution Drilling spindle speed: 18 Overhang: 800mm Drilling spindle stroke: 200mm Vertical adjustment of the drilling spindle head (electric): 450mm Max. distance between table and spindle: 780mm Table: 600x1200mm Machine weight: 1700 kg Documents: Operating manual, wiring diagram, spare parts list, test report The machine was completely overhauled by Vaumatec, 89431 Bächingen, in 2016 and has been used very little since. The machine is in very good condition. Purchased in 2016. Dedpfx Aloz Da Idj Aewc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65086, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC530, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,900 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 700 mm Dwsdpoz Apdnefx Al Ajc Spindle speed: 6,000 rpm Tool interface: SK40 Number of tool magazine positions: 24 MACHINE DETAILS Control system model: Heidenhain TNC530

Condition: good (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 1993/68, Graule Type ZS 135 Cut-off and Miter Saw Used machine Dwjdpfx Aoz Nyu Nol Aec Serial No. 68, Year of Manufacture 1993 Article number: JA_G261001 Description Cutting height 90° max. 135 mm Cutting width 90° max. 430 mm Cutting width 45° max. 300 mm Swivel range +/- 45° Adjustment manual Power 400V / 50 Hz 2.2 kW Speed 3800 rpm Saw blade max. 350 mm Working height 885 mm Dust extraction 100 mm Dimensions W x D x H 900 x 1200 x 1400 mm Weight approx. 105 kg Roller conveyor RLK Length 3000 mm Depth 400 mm Folding stop yes Total weight approx. 190 kg Condition / Work performed • Machine roughly cleaned • Machine functionality tested • Age-related and usage-related signs of wear • Available ex warehouse Subject to errors and changes in technical specifications. Note: Used item: • Prices apply as ex works prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the picture are not included in the scope of supply. • Saw blades are only for illustrative purposes and are not included in the scope of supply. Shipping options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is free of charge by arrangement. (Assembly and demonstration of the goods for demonstration purposes is optional and can be arranged!) • Our trained service personnel can optionally assemble the machine at your location and provide you with a brief training session. Travel, transportation and service costs are subject to an additional charge.

Condition: good (used), Includes tool cabinet and drill bits! 2. Table Work area: 600mm x 1200mm Tool holder: MK 4 Drilling capacity: 40mm in steel Tapping attachment Coolant system Dodpfx Asz Db Eqsl Aowc

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Dwjdpfx Aozuarmol Aoc Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Dwjdpfxez D D I Ie Al Asc Speed infinitely adjustable Drilling head electrically adjustable

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Dedpfjy Tn Ntjx Al Aewc

Condition: used, Year of construction: 1990, taper MK 3 Dwodpfx Alozkbqve Asc serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 Type: DR 40 Z Machine number: 1205-3 Dedozx H Icepfx Al Ajwc Drilling capacity in steel: 40 mm Drilling capacity in cast iron: 50 mm Thread cutting in steel: up to M33 Thread cutting in cast iron: up to M45 Tool holder: MK 4 Spindle diameter: 55 mm Spindle travel: approx. 200–220 mm Spindle speeds: 18 steps, approx. 35–1,800 rpm Feeds: 0.075–0.60 mm/rev Vertical adjustment: 450 mm Table: 1,200 × 600 mm Weight: Approx. 2,400 kg

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Dwjdpoz Ippxjfx Al Asc Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Dwsdpfoztdz Ajx Al Aec Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2022, 2022 Versafire EP 135 High End Professional Print Production Line Including: Versafire EP 135 A4/min Or 4,500 A3 Sheets/Hour (Simplex) Engine Unit, Media Identification Unit, Fuser Unit, Automatic Colour Diagnosis & Image Quality Monitor Unit, EFI Fiery Colour Controller E-86, EFI Impose (Streamlines & Automates The Imposition Process) & Fiery ES-3000 Spectrophotometer. Versafire Engine S/No. 5022F130003 (2025). LCIT RT5120 A3 Vacuum Feeder (A3 Large Capacity Tray With Vacuum Feeder, 2 Trays, Capacity Up To 4,400 Sheets (80 g/m2)). BY5020 Multi Bypass Unit (Additional Feeder (No Vacuum Support) For Up To 500 Sheets, Maximum 216 g/m2 Uncoated; e.g. For Banner, Special Stock, Envelopes, Overhead Transparencies, Labels, Letterhead & Postcards). LCIT Vacuum Feed Banner Sheet Tray (Vacuum Supported Banner Pile Feeder Option, Max. Capacity 730 Sheets (Top Tray Front Loading Will Be Disabled), Media Format 489-700mm Up To 300 g/m2). LCIT RT5120 Multi Bypass Attachment Kit For Vacuum Feeder (Must Be Installed When Attaching Multi Bypass Unit To Vacuum Feeder). Multi Bypass Banner Sheet Tray (Mechanical Support For Long Sheets (Banner). Roll-Away Cart Type 5010/5040 (Additional Roll-Away Cart For The High Capacity Stacker). SK5040 High Capacity Stacker (Receives & Holds Up To 5,000 Sheets, One Roll-Away Cart 5010 Comes Standard For Easy Removing Of Large Stacks Of Printed Material). Output Tray For Banner Sheet Type (Mechanical Support For Long Sheets (Banner). SR511 0 Standard Finisher (Up To 3,000 Sheets Capacity (80 gsm), Stapling Up To 100 Sheet With Automatic Shortening Of Staples). NOTE: A loading fee will be added to buyer's invoice of £200 + VAT. With TCRU/ORU (Sets A & B) Spare Parts To Increase Uptime; Includes Charging Unit, Drum Cleaning Unit, Image Transfer Belt Cleaning & Lubrication Unit, Infeed-, Transfer & Paper-Separation-Rollers, (4) Photoconductor Drum, Fuser Belt Smoothing Roller Unit, Dust Filter, Fuser Cleaning Unit, Fusing Unit And Fusing Refresh Roller Unit, Versafire EP Toner (Black), Versafire EP Toner (Yellow), Versafire EP Toner (Magenta), Versafire EP Toner (Cyan), (3) Waste Toner Bottles, Empty Toner Bottle Collection Box, Matt Fuser Assembly Unit, Dell Optical USB Mouse, Dell Qwerty USB Keyboard, Cables, Versafire EP Branding Kit & Operating Instruction Manuals. Please note: Printer is now in storage and not under power. NOTE: A loading fee will be added to buyer's invoice of £200 + VAT. Dwodpfxez H U Hte Al Aoc

Condition: new, Spare parts for Donau high-speed radial drilling machines Donau DR Donau Danuflex Donau Danumeric Dwodpjy Ri H Iefx Al Ajc Donau Danusys Donauflex Donaumeric

Condition: used, bore capacity in steel (diameter) 32 mm Dwedezwg Ruepfx Al Aoc arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 Dsdpjy Uv Tvjfx Al Aswc - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.