Used Dematic 600-540 Ir765 for sale (12,692)

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! * Nsdpfx Aou N Agkjf Sswl

Condition: used, Technical details: Nodpfx Ajwfrq Sjf Sewl width:: 400 depth: 335 mm height: 500 mm 2 pieces available (price per piece) Cast steel material Slot transverse:Quantity 4 Size: a=22mm, h=41mm, b=37mm ,c= 15mm Number of clamping holes: 8 Size 4x22mm/4x26mmm *

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm Nwodpfx Aowa I Shsf Sol centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: used, Technical details: table length: 500 mm table width: 300 mm width:: 500 depth: 300 mm height: 400 mm dimension L-W-H: 500 x 300 x 400 mm weight: ca. 55 kg with slotted holes Cast steel material Surface finished Nodpewbhdmofx Af Sswl *

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,273 h, load capacity: 3,500 kg, lifting height: 3,680 mm, fuel type: electric, mast type: telescopic, construction height: 2,650 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Rear tire size: 21x8-9 Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of manufacture: 2025 Description: In addition to this unit, we offer a range of other forklifts and warehouse equipment. All machines are workshop-tested and FEM 4.004 inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing options available on request and under attractive terms. We offer professional and comprehensive advice on our vehicles. Nwjdsxfm H Sjpfx Af Sjl Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, full cab, interior mirror, joystick, beacon, windscreen wiper, single pedal, LED, seat,

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Nwsdpfx Afezc D Dko Sol Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Nedpfx Afjya Dage Sewl Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Nwodpfezc D Dqsx Af Sjl Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Transport trolley: commission trolley, shelf trolley, stable design Nodpfxjt Trxps Af Sowl -3 levels: border intermediate dimension 450 mm -Chassis: 2 swivel castors / 2 fixed castors -Total dimensions: 1000/600/H1215 mm -Weight: 45 kg

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm Nwodpfsu Rnb Nsx Af Sjl 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min Nwodpfx Aswhzmzef Sjl

Condition: used, Year of construction: 2011, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors total power requirement 7,2 KVA weight of the machine ca. 450 kg Nsdpfozb N Ursx Af Sjwl dimensions of the machine ca. 1,8 x 1,5 x 1,9 m Coolant System BMF - BFU 600 8/20 -13 - from CTX beta 800 V4 - universally applicable - controllable via contactors - Includes paper belt filter - Number of pumps: 2 - Pump capacity: 0.75 kW, 2,880 rpm, Q: 2 m³/h, H: 65.2 m, T: 90°C max. 4.0 kW, 2,930 rpm, Q: 4 m³/h, H: 177.7 m, T: 90°C max.

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements Nwjdpex Iwfmjfx Af Sel E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Nwodpfx Aowzmu Rjf Sjl Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 12,000 kg, fork length: 1,800 mm, Forks Load center: 600 Fork width: 250 mm Fork thickness: 65 mm Condition: Ready for use and fully functional Technical condition: very good Description: LOAD STABILIZER; opening range: 100 - 1200 mm; FEM 5B LOAD STABILIZER; opening range: 100 - 1200 mm; FEM 5B Nodoz Ev Ezspfx Af Sjwl

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 22,460 h, load capacity: 5,000 kg, lifting height: 3,760 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, empty load weight: 7,250 kg, total length: 3,050 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Nsdpfx Afjz Evpae Sswl Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this H50D-02/600. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Side shift, Heater, Full cabin.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Nwsdsz Et T Nspfx Af Sjl For further information, you are of course welcome to contact us directly.

Condition: used, all stainless steel suitable for thermal oil heating max. 435 kW suitable for fire protection infeed belt oil circulation system net belt length 7.000 mm net belt width 600 mm adjustable conveyor speeds sediment removal system filter upper and lower conveyor belts with new conventional-controlled electrical control box hydraulic lifting device dimensions (l x w x h) : ± 10.500 x 2.400 x 2.300 mm + Rotary filter Type RF-801 dimensions (L x W x H): ± 1.100 x 1.000 x 2.000 mm in good condition in good working order Full mechanical overhaul: New bearings, chains, seals, slide bushings, gears, … New motors/gearboxes for: oil circulation pump, conveyors, and waste transport system Nedpfez Ep Dqsx Af Sswl Oil bath fully re-insulated New grill belts, standard dimensions for snack products (to be discussed depending on product and customer specifications) All wear-sensitive parts replaced or fully refurbished General cleaning, overhaul, and structural inspection Full electrical overhaul + update of electrical cabinet and control: All electrical components and cables replaced Conventional push-button control with Jumo PID temperature controller New electrical diagrams (E-Plan) New sensors Component and cable coding

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, MONFORTS RNC 600 AC – Technical Data Manufacturer: MONFORTS Type: RNC 600 AC Machine Type: CNC lathe Nwjdpfx Afoz Elmne Sjl Design: horizontal CNC lathe Control System: SIEMENS SINUMERIK Drive System: SIEMENS SIMODRIVE 611 Controlled Axes: X, Z, C, clearly displayed on the control system Additional Axis Display: Auxiliary axis (AWZ), displayed as an angular axis in degrees C-Axis: present / clearly displayed in the CNC control system Main Spindle: designated as master spindle S1 in the control system Tool Turret: 12-station turret Workpiece Clamping: 3-jaw chuck Tailstock: present Tailstock Mounting: MK 4 Tailstock / Drawing Dimension: Ø 90 mm Tailstock Drawing Dimensions: 105 mm / 86 mm Length Dimension according to Tailstock Drawing: 1,570 mm Additional Length Dimension: 1,200 mm Setting Dimension according to Drawing: approx. 1,310 mm

Condition: used, FlowCook Njdpfsz Eikwex Af Sjwl all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: excellent (used), MEMMERT ICP 600 Precision Incubator / Refrigerated Incubator Manufacturer: MEMMERT GmbH + Co. KG Type: ICP 600 Machine Type: Precision Incubator / Refrigerated Incubator Internal Volume: 256 Liters For sale is a used MEMMERT ICP 600 precision incubator with a powerful refrigeration unit and motorized air circulation in the interior. The unit is suitable for temperature-controlled applications in laboratories, research, quality assurance, and industry, as well as for incubation, storage, and testing tasks. Technical Data: Model: ICP 600 Internal Volume: 256 Liters Setting Temperature Range: 0 °C to 60 °C Operating Temperature Range: 0 °C to 60 °C Setting Accuracy: 0.1 °C Nominal Temperature: 60 °C Power Supply: 230 V / 50 Hz Current Consumption: 3.1 A Power: 700 W Protection Class: IP20 Max. Number of Sliding Shelves: 7 Max. Load per Sliding Shelf: 30 kg Max. Load per Unit: 80 kg Nsdpfx Aoz Eh Sysf Sewl Dimensions: External Dimensions (W × D × H): approx. 958 × 656 × 1,335 mm Internal Dimensions (W × D × H): approx. 800 × 500 × 640 mm Internal Volume: 256 Liters Equipment: Electronic PID process controller Alphanumeric text display Internal data logger Program sequence control for up to 40 ramp segments Adjustable motorized air circulation Integrated weekly timer Recessed pressure/rotary encoder Optical alarm indicator Refrigeration unit with automatic hot gas defrost Stainless steel interior RS232 interface Sliding shelves as shown in the pictures Mobile base Shipping Data: Unit (W × D × H): approx. 958 × 656 × 1,335 mm Weight: approx. 144 kg Condition: Used Optical condition as shown in the pictures. Nameplate present. Scope of Delivery: MEMMERT ICP 600 Precision Incubator Sliding shelves as shown in the pictures Mobile base Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: good (used), Year of construction: 1994, Diesel tank system, diesel tank, gas station, fuel tank system, tank system -Manufacturer: Rietberg, Diesel/Heating Oil Tank System -Type: Tank capacity 600 l DIN 6623/2/A Nwedpfez Ehc Ssx Af Sjl -Hand pump: without connecting hose -Dimensions: 1210/1000/H1600 mm -Weight: 258 kg

Condition: excellent (used), Year of construction: 2017, CNC cylindrical / roll grinding machine KRAFT / Praise TT60-40L-C2-H, used – Ø 600 x 4,000 mm, Siemens Traveling-table CNC grinder for rolls and heavy shafts up to 4,000 mm between centres and 3 t between centres. Built 2016/2017 by Praise Machinery, Taiwan, and hardly used since. Located in Einbeck (Germany), available at short notice. Inspection by appointment. Technical data (manufacturer's spec sheet): - Swing over bed: 600 mm - Distance between centres: 4,000 mm - Centre height: 320 mm - Max. workpiece weight: 3,000 kg between centres, 6,000 kg on steady rests - Control: Siemens Sinumerik CNC, Siemens drives - Grinding wheel: 760 x 100 x 304.8 mm, 45 m/s, wheel motor 22.5 kW, stepless spindle speed - X-axis travel 315 mm, 0.0005 mm/pulse; Z-axis travel 4,400 mm, 10–6,000 mm/min - Workhead speed 8–80 rpm, 11.25 kW - Tailstock quill stroke 100 mm, MT 6 - Accuracy: roundness and cylindricity 0.002–0.005 mm, Ra ≤ 0.3 µm - Hydrostatic/hydrodynamic lubrication of wheelhead and carriage - Connected load approx. 45 kW, 400 V / 50 Hz - Footprint approx. 13,000 x 2,900 x 1,800 mm, weight approx. 14.7 t Equipment: - Swivel workhead 0–90° - Electromechanical tailstock quill with foot pedal - Crowning device (type C2) - Grinding wheel guard sensor - 4-jaw chuck - 2 two-point steady rests (neck Ø 100–300 mm) - Dresser, wheel flange with puller, dial gauge, magnetic base - Coolant system with magnetic and paper band filter - Full enclosure with sliding doors, telescopic covers - Electrical cabinet with air conditioner - CE documentation, operating manual Nsdpoz Ebl Tefx Af Sewl Dismantling, transport and re-installation can be arranged. Price on request.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 600, number of blades: 20, rotational speed (max.): 1,475 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 22 kW Speed: 1,475 rpm Hydraulic unit power: 3 kW Oil tank capacity: 48 l Number of axles: 1 Njdpfx Ajz Ebbbef Sjwl Opening width: 600 mm Opening length: 250 mm Screen perforation: 15 mm Number of fixed blades: 20+ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,350 x 2,400 mm Number of transport packages: 3 Note: The magnet is not included in the offer.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Machine Benefits Technical Machine Benefits Nodpjz D T Scjfx Af Sjwl • Spindle nose to table top: 145-685 mm